The interleaving/multiplexing technique was used to realize a 200?MHz real time data acquisition system. Two 100?MHz ADC modules worked parallelly and every ADC plays out data in ping pang fashion. The design improv...The interleaving/multiplexing technique was used to realize a 200?MHz real time data acquisition system. Two 100?MHz ADC modules worked parallelly and every ADC plays out data in ping pang fashion. The design improved the system conversion rata to 200?MHz and reduced the speed of data transporting and storing to 50?MHz. The high speed HDPLD and ECL logic parts were used to control system timing and the memory address. The multi layer print board and the shield were used to decrease interference produced by the high speed circuit. The system timing was designed carefully. The interleaving/multiplexing technique could improve the system conversion rata greatly while reducing the speed of external digital interfaces greatly. The design resolved the difficulties in high speed system effectively. The experiment proved the data acquisition system is stable and accurate.展开更多
The solution heat treatment,cold deformation and subsequent aging were performed on CuMoCr alloy.And the influence of deformation and aging treatment on the electrical conductivity of CuMoCr alloy was studied through ...The solution heat treatment,cold deformation and subsequent aging were performed on CuMoCr alloy.And the influence of deformation and aging treatment on the electrical conductivity of CuMoCr alloy was studied through metallograph,transmission electron microscopy(TEM) and electrical conductivity measurement.Results show that deformation without subsequent aging can reduce the electrical conductivity of CuMoCr alloy,but deformation followed by the optimum aging treatment can effectively improve the electrical conductivity of CuMoCr alloy.Aging at 500 ℃ for 4 h after 80% deformation,the much better electrical conductivity of CuMoCr alloy can be obtained.Reduction of Cr content in the Cu matrix could be the reason for the enhancement of electrical conductivity.展开更多
文摘The interleaving/multiplexing technique was used to realize a 200?MHz real time data acquisition system. Two 100?MHz ADC modules worked parallelly and every ADC plays out data in ping pang fashion. The design improved the system conversion rata to 200?MHz and reduced the speed of data transporting and storing to 50?MHz. The high speed HDPLD and ECL logic parts were used to control system timing and the memory address. The multi layer print board and the shield were used to decrease interference produced by the high speed circuit. The system timing was designed carefully. The interleaving/multiplexing technique could improve the system conversion rata greatly while reducing the speed of external digital interfaces greatly. The design resolved the difficulties in high speed system effectively. The experiment proved the data acquisition system is stable and accurate.
文摘The solution heat treatment,cold deformation and subsequent aging were performed on CuMoCr alloy.And the influence of deformation and aging treatment on the electrical conductivity of CuMoCr alloy was studied through metallograph,transmission electron microscopy(TEM) and electrical conductivity measurement.Results show that deformation without subsequent aging can reduce the electrical conductivity of CuMoCr alloy,but deformation followed by the optimum aging treatment can effectively improve the electrical conductivity of CuMoCr alloy.Aging at 500 ℃ for 4 h after 80% deformation,the much better electrical conductivity of CuMoCr alloy can be obtained.Reduction of Cr content in the Cu matrix could be the reason for the enhancement of electrical conductivity.
