Bi0.5(Na0.85K0.15)0.5TiO3(BNKT15) thin films were synthesized by metal-organic decomposition(MOD) at annealing temperatures of 650,680,710 and 740℃,and the effects of annealing temperature on the microstructure,diele...Bi0.5(Na0.85K0.15)0.5TiO3(BNKT15) thin films were synthesized by metal-organic decomposition(MOD) at annealing temperatures of 650,680,710 and 740℃,and the effects of annealing temperature on the microstructure,dielectric properties,remnant polarization(2Pr) and leakage current density were studied with X-ray diffractometer,atomic force microscope,precision impedance analyzer,ferroelectric analysis station and semiconductor parameter tester.The results show that the thin film annealed at 710℃ exhibits a typical perovskite structure without predominant orientation and a smooth surface with evenly distributed grains.2Pr value(67.4 μC/cm2 under 830 kV/cm) and the leakage current density(1.6×10-6 A/cm2 at 170 kV/cm) for BNKT15 thin film annealed at 710℃ are better than those for thin films annealed at other temperatures.展开更多
A simple,stable and reliable virtual logic analyzer is presented. The logic analyzer had two modules:one was the test pattern generation module,the other was the logic monitoring module. Combining the two modules,one ...A simple,stable and reliable virtual logic analyzer is presented. The logic analyzer had two modules:one was the test pattern generation module,the other was the logic monitoring module. Combining the two modules,one is able to test a digital circuit automatically. The user interface of the logic analyzer was programmed with LabVIEW. Two Arduino UNO boards were used as the hardware targets to input and output the logic signals. The maximum pattern update rate was set to be 20 Hz. The maximum logic sampling rate was set to be 200 Hz. After twelve thousand cycles of exhaustive tests,the logic analyzer had a 100% accuracy. As a tutorial showing how to build virtual instruments with Arduino,the software detail is also explained in this article.展开更多
For surface hardening of metal,a quasi-Dammann grating (QDG) is proposed and fabricated to generate array spots with proportional-intensity distribution.To get uniformly hardened band distribution and improve the wear...For surface hardening of metal,a quasi-Dammann grating (QDG) is proposed and fabricated to generate array spots with proportional-intensity distribution.To get uniformly hardened band distribution and improve the wear resistance of the sample surface,a three-order QDG is designed to produce array spots with enhanced intensity in the edge.The design and fabrication of the QDG are described in detail.The surface profile of the fabricated grating was measured,which shows that the fabrication error is less than 2%.The laser beam intensity distribution shaped by the QDG was tested by a laser beam analyzer to verify the validity of the QDG.The application of the QDG in the laser surface hardening of metal was experimentally investigated,and the results show that the hardness distribution of the modified layer and the wear resistance of the sample surface are improved significantly by using the QDG.展开更多
基金Projects(10672139, 10825209, 50872117) supported by the National Natural Science Foundation of ChinaProject(207079) supported by the Key Program of Ministry of Education of China+3 种基金Project(07JJ5002) supported by the Natural Science Foundation of Hunan Province, ChinaProject(08C862) supported by Scientific Research Fund of Hunan Provincial Education Department, ChinaProject([2008]101) supported by Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education MinistryProject([2007]362) supported by Hunan Prestigious Furong Scholar Award, China
文摘Bi0.5(Na0.85K0.15)0.5TiO3(BNKT15) thin films were synthesized by metal-organic decomposition(MOD) at annealing temperatures of 650,680,710 and 740℃,and the effects of annealing temperature on the microstructure,dielectric properties,remnant polarization(2Pr) and leakage current density were studied with X-ray diffractometer,atomic force microscope,precision impedance analyzer,ferroelectric analysis station and semiconductor parameter tester.The results show that the thin film annealed at 710℃ exhibits a typical perovskite structure without predominant orientation and a smooth surface with evenly distributed grains.2Pr value(67.4 μC/cm2 under 830 kV/cm) and the leakage current density(1.6×10-6 A/cm2 at 170 kV/cm) for BNKT15 thin film annealed at 710℃ are better than those for thin films annealed at other temperatures.
文摘A simple,stable and reliable virtual logic analyzer is presented. The logic analyzer had two modules:one was the test pattern generation module,the other was the logic monitoring module. Combining the two modules,one is able to test a digital circuit automatically. The user interface of the logic analyzer was programmed with LabVIEW. Two Arduino UNO boards were used as the hardware targets to input and output the logic signals. The maximum pattern update rate was set to be 20 Hz. The maximum logic sampling rate was set to be 200 Hz. After twelve thousand cycles of exhaustive tests,the logic analyzer had a 100% accuracy. As a tutorial showing how to build virtual instruments with Arduino,the software detail is also explained in this article.
基金supported by the National Natural Science Foundation of China (Grant No.10832011)the National Science Foundation for Postdoctoral Scientists of China (Grant No.20100470139)
文摘For surface hardening of metal,a quasi-Dammann grating (QDG) is proposed and fabricated to generate array spots with proportional-intensity distribution.To get uniformly hardened band distribution and improve the wear resistance of the sample surface,a three-order QDG is designed to produce array spots with enhanced intensity in the edge.The design and fabrication of the QDG are described in detail.The surface profile of the fabricated grating was measured,which shows that the fabrication error is less than 2%.The laser beam intensity distribution shaped by the QDG was tested by a laser beam analyzer to verify the validity of the QDG.The application of the QDG in the laser surface hardening of metal was experimentally investigated,and the results show that the hardness distribution of the modified layer and the wear resistance of the sample surface are improved significantly by using the QDG.