光纤光缆用油膏长期分油性能的研究

本文介绍了光纤光缆用新型油膏的特性，通过对五种油膏分别进行长达几百至１０００多小时的分油测试，探讨了各种油膏分油随时间变化的规律，对各种油膏的长期分油作了有依据的预估，对各种油膏的分油性能作了比较。

温度和时间对光纤光缆填充油膏分油性能的影响

本文介绍了光纤光缆填充新型油膏的基本特性,通过对五种油膏在几种温度下分别进行长达几百至一千多小时的分油测试,探讨了各种油膏分油率随时间和温度变化的规律,对各种油膏的长期分油进行了预估和比较.

微型汽车轮毂轴承脂摩擦性能优化研究

为了探究润滑脂对微型汽车轮毂轴承摩擦性能的影响,以某款微型汽车为研究对象,利用SKF滚动轴承计算理论,建立了轮毂轴承的摩擦力矩分析模型,研究不同润滑脂参数对轮毂轴承摩擦性能的影响规律;结合润滑脂性能试验、轮毂轴承摩擦力矩试验以及整车滑行试验,对轮毂轴承用脂的摩擦性能进行了优化及验证。研究表明,黏度较低、分油性能好的润滑脂对降低轮毂轴承摩擦力矩、提高整车燃油经济性有重要意义;采用复合锂基合成烃润滑脂,能降低轮毂轴承摩擦力矩40%,降低整车滑行阻力7.3%。

锂钙混合皂纤维结构及其对润滑脂性能的影响

采用电子显微镜观测了不同急冷温度条件下制备的锂钙基润滑脂的皂纤维结构,考察了皂纤维结构对锂钙基润滑脂的延长工作锥入度(105次)与工作锥入度差值、钢网分油性能的影响。

Thermal oxidation of two aviation synthetic lubricant base oils

The thermal degradation of two synthetic lubricants base oils, poly-a-olefins （PAO） and di-esters （DE）, was investigated under oxidative pyrolysis condition and their properties were characterized in simulated ＂areo-engine＂ by comparing the thermal stability and identifying the products of thermal decomposition as a function of exposure temperature. The characterization of the products were performed by means of Fourier transform infrared spectrometry （FTIR）, gas chromatography/mass spectrometry （GC/MS） and viscosity experiments. The results show that PAO has the lower thermal stability, being degraded at 200℃ different from 300 ℃ for DE. Several by-products are identified during the thermal degradation of two lubricant base oils. The majority of PAO products consist of alkenes and olefins, while more oxygen-contained organic compounds are detected in DE samples based on GC/MS analysis. The related reaction mechanisms are discussed based on the experimental results.

金具接头端子散热研究

建设特高压输电网对于实现远距离大容量电能输送、满足日益增长的用电需求和解决地区资源分布不均有重要意义。自特高压直流工程投运以来,换流站接头端子发热问题突出,严重影响输电的可靠性。本文主要对涂覆电力复合脂对金具温升的影响情况进行研究,旨在进一步得到电力复合脂对接头端子电流-温升特性的影响规律。首先对金具试件端子搭接处进行清洁并涂覆一层厚约 0.2mm 的电力复合脂,再将接触面叠合用螺栓紧固,然后分别在常温和交变温工况下对试件通电流 3000A 稳定 4 小时。计算结果表明:在加载相同电流大小的条件下,电力复合脂的分油性对接头端子搭接部位的温度有明显影响。

Molecular Markers and Agronomic Traits of a New Kind of Genic Male Sterile Material Mian 7AB-4-2 in Brassica napus L.

[ Objective] The study was to investigate the agronomic traits and breeding characteristics of genic male sterile material Mian 7AB-4- 2 in Brassica napus. [ Method] The differences in agronomic traits and polymorphisms in SSR markers, between the genic male sterile material Mian 7AB-4-2 in Brassica napus and its sisterly line Mian 7AB-4-1 were investigated by hybridization and molecular identification; and the percentage of sterile individuals of Mian 7AB-4-2 and of the hybrids with its sisterly line Mian 7AB-4-1 from test cross and back cross were also studled. [ Result] Mian 7AB-4-2 was not significantly different in agronomic traits from its sisterly line Mian 7AB-4-1 at 0.05 probability level. The per- centages of sterile individuals in the pollinated fertile Mian 7AB-4-2 plants were over 60%, and that in its sisterly line Mian 7AB-4-1 was about 25%. In test crosses with other nine sterile lines, Mian 7AB-4-1 kept the percentage of sterile individuals of sterile lines over 90%, and the percentage of sterile individuals from back cross over 80%. With regard to molecular markers, Mian 7AB-4-2 and its sisterly line Mian 7AB-4-1 were different in the band number from SSR primers a2 and E10. [ Conclusion] The results indicate that Mian 7AB-4-2 is helpful for rapeseed breeding, quickening the application of new materials in field breeding.

Dispersion mechanism of nano-magnetite coated with oleate in aqueous carrier

To investigate dispersion mechanism of water-based ferrofluid, the effects of electrolytes on the dispersibility of ferrofluid in the dispersing system with different pH values were discussed. The ζ-potential of magnetic nano-particles was measured to discover the adsorbent state of oleate group on the surface of magnetite particles. The mechanism that coexisting electrolyte influences the dispersibility was studied. The results show that the electrolyte affects the stability of ferrofluid through an effect on the structure of surfactant bilayer adsorption, which was proved by ζ-potential measured. The associated mechanism of steric and electrostatic is dominant in aqueous ferrofluid.

Pressure Buildup Analysis for a Well in a Closed, Bounded Multiwell Reservoir

A general method has been developed for analyzing pressure buildup data from a well located in a system with both production and injection wells in a closed, bounded two-phase flow reservoir. The proposed method enables one to calculate the total mobility or permeability-thickness product, the skin factor, the average drainage-area pressure and the injection-production ratio （at the instant of shut-in） with accuracy from pressure buildup （or falloff） data dominated by a linear trend of reservoir pressure. Out of thousands of well tests, several typical field examples have been presented to illustrate the application of the proposed method for analyzing pressure transient data from a well located in a water-injection multiwell reservoir. And the possible application of this method to heterogeneous systems such as naturally fractured reservoirs is also discussed. Approaches to aid practicing engineers in verifying the buildup interpretation （or recognizing the interference of offset wells） are presented. Extension of the presented method to a gas well located in a multiwell gas reservoir is also suggested

Rose Essential Oil Extraction from Fresh Petals Using Synergetic Microwave ＆ Ultrasound Energy： Chemical Composition and Antioxidant Activity Assessment

The aim of the present work was to investigate the synergetic effect of microwave and ultrasound treatment on the production, chemical composition and antioxidant activity of rose essential oil. The rose essential oil was extracted from fresh Rosa x damciscena Mill. petals by four methods, hydrodistillation, steam distillation, organic solvent extraction and ultrasounds followed by microwave hydrodistillation. The chemical composition of the extracts was analysed by GC-MS, and the antioxidant capacity by DPPH. It was found that both chemical composition and the antioxidant activity of the extracts depend on the extraction method. Overall it was found that microwaves coupled with ultrasonic treatment can be used effectively for the intensification of the extraction of monoterpenes and sesquiterpenes--fragrance bearing molecules--and equally, for increased antioxidant activity while using about 4 time shorter extraction time. The scale-up of the method was also evaluated. The results obtained in this research support the possible use of the US/MW method for the extraction of rose essential oil for the pharmaceutical and fragrance industry.

Low polar volatile constituents from Isodon excisa by GC-MS

An attempt had been made to isolate and identify the low polar volatile constituents from Isodon excisa. The dried plants were heat extracted with ethanol and then extracted with petroleum ether. The constituents were isolated and analyzed by GC-MS and then we retrieved them on NIST08 mass spectrometry database to determine their structures. Finally, successful results were achieved, 111 compounds were obtained and identified. 105 of them were reported for the first time in lsodon excisa and 22 of them were first found in natural products. Thus, the main constituents of it were found to be Sitosterol （33.28%）, 3-Amino-4-pyrazolecarbonitrile （9.55%）

Research on Oil/Gas In-pipe Inspection Robot

A new type of in-pipe mobile robot was designed and developed on the basis of w heel in-pipe robot and crawler in-pipe robot. The three sets of driving wheels circumferentially 120° apart in the cross section, both front and rear driving wheels are distributed on the same parallelogram mechanis m. The driving motor drives the three sets of driving wheels by worm couple, the regulating motor makes the three sets of driving wheels push against the pipe inwall with stable and adequate pressing force by the ball screw pair and p ressure sensor, so the in-pipe robot can provide adequate and stable traction force. The robot mechanism is simple and sm all in size and work reliably . It is particularly suitable to the pipe with diameter 400～650 mm.

Oil Spill Dispersion Forecasting with the Aid of a 3D Simulation Model

The simulation of the transport and fate of an oil slick, accidentally introduced in the marine environment, is the focus of this research. An oil spill dispersion forecasting system （DIAVLOS forecasting system）, based on wind, wave and ocean circulation forecasting models is developed. The 3-D oil spill model, by the University of Thessaloniki, is based on a Lagrangian （tracer） model that accounts for the transport-diffusion-dispersion and physicochemical evolution of an oil slick. The high resolution meteorological, hydrodynamic and wave models are coupled with the operational systems ALERMO and SKIRON of the University of Athens. The modelling system was successfully assembled and tested under theoretical and realistic scenarios, in order to be applied in forecasting mode and be used by local authorities when an accident occurs. As a result, a 48-hours oil spill dispersion forecasting system was synthesized aiming primarily at the oil spill management at the Burgas-Alexandroupolis oil-pipe terminal, part of a greater busy coastal basin in North Aegean.

The Characteristic Relationship Between Oil Uptake and Moisture Content during the High Temperature Immersion Frying of Thin Potato Crisps

Thin potato crisps (2mm) were fried at 170℃, 180℃ and 190℃ for varioustimes from 10s to 180s inclusive. It was found that definite oil uptake, moisture loss trends existduring the frying process. No significant difference in the oil uptake or moisture loss ratesbetween flat-cut and ridge-cut crisps exists. Also found in this study was that an increased oiltemperature promoted higher moisture loss rates. In turn, the higher moisture loss rates contributedto a higher oil uptake rate. It was found, based on the volumetric plots of oil content υs. watercontent, that the oil uptake rate was proportional to the moisture loss rate. As a result, it hasbeen shown that there is a possibility of having a characteristic curve of oil uptake againstmoisture content.

Qualitative and Quantitative Analysis of Linoleic Acid in Polygonati Rhizoma

Objective To explore the major compound in Polygonati Rhizoma(Huang Jing,黄精)for quality control.Methods The major compound was isolated and analyzed by liquid chromatography-mass spectrometry(LC-MS),and subsequently further identified by nuclear magnetic resonance(NMR).Thin layer chromatography(TLC)was optimized based on the previous methods reported in the Chinese Pharmacopeia(2015 edition).Results The major compound was isolated from the natural material and identified as linoleic acid.A high performance liquid chromatography(HPLC)method with robust linearity(R2=0.9997),specificity,precision,stability,repeatability and recovery was developed for linoleic acid determination.TLC chromatogram was improved significantly after optimization for qualitative analysis.Conclusions The optimized TLC method is practical and can be adopted for quality control of Polygonati Rhizoma(Huang Jing,黄精).The levels of linoleic acid vary between species of Polygonati Rhizoma(Huang Jing,黄精),with Polygonatum cyrtonema Hua(Jiang Xing Huang Jing,姜型黄精)showing the highest contents.This study provides valuable information for quality control of Polygonati Rhizoma(Huang Jing,黄精).

Improving Refinery Profits via Fine Management of Hydrogen Networks

Hydrogen network management is important to refineries. Various systematic management techniques have been developed to improve the efficiency of refinery hydrogen networks. However, existing methods all treat the hydrogen network separately. The tradeoff between hydrogen network cost and oil processing network benefit has not been explored in the hydrogen network management yet. A novel sensitivity analysis scheme is presented to take oil processing network into consideration. Oil processing unit which is sensitive to both oil processing networks and hydrogen networks is identified first. Then, sensitivity analysis of the unit around the operating point of oil processing networks and hydrogen networks is carried out. Finally, the overall optimal operating condition is obtained. An example of a real Chinese refinery demonstrates the effectiveness of the proposed analysis method.

SYNTHESIS OF FUNCTIONAL MACROMOLECULE INTERMEDIATE THROUGH ACYLATION CATALYZED BY [Emim]Cl-AlCl_3 IONIC LIQUID

Acylation reaction of anthracene with oxalyl chloride in the presence of [Emim]Cl-AlCl3 ionic liquid has been investigated. Pure 1,2-aceanthryenedione, which is used as intermediate of functional aromatic polymer material, was obtained by recrystalling the reaction mixture with aether and was determined by GC/MS, 1↑HNMR and FTIR analysis. The influences of various parameters, such as the contents of AlCl3 in [Emim]Cl-AlCl3, the amount of acylation agent, amount of [Emim]Cl-AlCl3, reaction temperature and reaction time were investigated. The optimum conditions were as follows： the molar fraction of AlCl3 in ionic liquid [x（AlCl3）] being 0.67, molar ratio of ionic liquid to anthracene being 2：1, molar ratio of oxalyl chloride to anthracene being 2：1, reaction temperature being 40℃ and reaction time being 6h. Under above conditions, the yield and selectivity of 1,2-aceanthrylenedione can reach 91.5% and 98.3% respectively. Further more, [Emim]Cl-AlCl3 ionic liquid, compared with metal halides such as AlCl3, was found to catalyze the reaction as a novel environmental friendly catalyst and solvent and can be reused.

Research on the Relationship between Molecular Activity of Additives and Lubricating Performance of Aluminum Rolling Oil

In this paper,an ab initio,local density functional(LDF)method was used to explore the relationship between the molecular properties of additives and the lubricating performance of aluminum rolling oil.The structural properties of butyl stearate,dodecanol,docosanol,and methyl dodecanoate were studied according to the density functional theory.The calculated data showed that the atoms in or around the functional groups might be likely the reacting sites.Because of the different functional groups and structure of ester and alcohol,two types of complex additives,dodecanol and butyl stearate,methyl dodecanoate and butyl stearate,respectively,were chosen for studying their tribological properties and performing aluminum cold rolling experiments.The test results agreed with the calculated results very well.The complex ester,viz.methyl dodecanoate and butyl stearate,had the best lubricating performance with a friction coefficient of 0.084 1 and a permissive-rolling thickness of 0.040 mm as compared with that of dodecanol-butyl stearate-base oil formulation.

Study on Desulfurization of Naphtha by Modified Y Zeolite

NH4Y zeolite was prepared through ion-exchange of NaY zeolite with an ammonium salt. Then LaY zeolite was obtained through a secondary ion-exchange of NHaY zeolite with a rare earth salt solution followed by calcination of the zeolite product. Dynamic adsorptive desulfurization of naphtha was conducted in the presence of the modified LaY zeolite, and the sulfur content of the treated naphtha samples was analyzed by microcoulometry. The test results showed that under dynamic conditions the LaY zeolite prepared through secondary ion-exchange of NH4Y zeolite, which was prepared using 1.0 mol/L ammonium salt, with the rare earth salt exhibited a better desulfurization efficiency. Furthermore, the LaY zeolite achieved a best desulfurization effect at an adsorption temperature of 45 ℃ and an adsorbent/oil ratio of 1：2.

SYNTHESIS OF 1,2-ACEANTHRYLENEDIONE THROUGH ACYLATION OF ANTHRACENE WITH OXALYL CHLORIDE

Acylation of anthracene and oxalyl chloride in the presence of anhydrous AlCl3 was investigated. Pure 1,2-aceanthrylenedione, which is used as new functional macromolecule, was prepared by extraction and recrystallation. The structure of 1,2-aceanthrylenedione was identified by measure of melting point, GC/MS, FTIR and 1HNMR analyses. The influences of various parameters, such as solvent, dosage of catalyst, molar ratio of anthracene to oxalyl chloride, reaction temperature, and reaction time were studied. The anhydrous AlCl3 was found to catalyze the reaction with high yeild and good selectivity. When the reaction temperature is 303K, reaction time is 5h and molar ratio of anthracene to oxalyl chloride is 1:2, the yield and selectivity of 1,2-aceanthrylenedione is 83.8 % and 92.3% respectively.