浅议配电系统中供电可靠性

配电系统是直接连接用户的系统,其供电可靠性对用户有着重要的影响。本文对配电系统的影响供电可靠性的因素、可靠性分析内容以及提高系统供电可靠性的措施等方面进行了研究。

蓄电池对车辆的适应性研究

从蓄电池与整车匹配流程、整车开发中的电池设计控制、电池在整车中的利用策略等方面,研究了蓄电池对车辆的适应性。

并联DC/DC系统中高速无线通信接收装置的设计

为了解决并联DC/DC控制系统中信息高频、单次传输量小的问题,就目前基带处理平台功能单一、灵活性差、运算效率低等问题,提出了一种改进型基带处理方案。该方案以FPGA+DSP为处理架构,依托高性能器件和高速接口搭建了基带处理平台。分别从基带处理和射频前端两个方面对无线通信系统接收装置进行硬件设计,重点研究基带处理DSP与FPGA的接口设计和零中频架构射频前端,通过FPGA对本地振荡器、A/D进行动态配置,采用基于BPSK的软件无线电平台,通过编写程序进行测试,结果验证了该方案满足科研要求,且具有一定的通用性和灵活性。

NOVEL AIRCRAFT ELECTRICAL POWER DISTRIBUTION SYSTEM BASED ON DISTRIBUTED COMPUTER

As a matured technique used in many fields,the distributed computer system is still a new management method for the aeronautical electrical power distribution system in our country. In this paper, a novel aircraft electrical power distribution system based on the distributed computer system is proposed. The principles, features and structure of the aircraft electrical power distribution system and the distributed computer system named electrical load management system (ELMS) are studied. The ELMS composed of four electrical load management centers (ELMCs) and two power source processors (PSPs) operates in the 1553B buses. Principles of the ELMCs and the PSPs are introduced. With the application of the distributed computer system, the aircraft electrical power distribution system is simple, adaptable and flexible.

Performance analysis of aircraft low-power thermoelectric refrigeration system

An optimal design method for an aircraft low-power thermoelectric refrigeration system（TRS）is proposed using an existing experimental model as the research platform under given aircraft flight conditions.The variation curves of the cooling capacities and the refrigeration coefficients of the system running at three flight altitudes are investigated.The performance of the system is evaluated by the minimum-entropy-generation method and the performance penalty is also calculated.The power variation curves of the cooling system are obtained by an electric power experiment.The peak values of these curves are less than the maximal electric power supply of airborne equipment,proving that the use of the low-power TRS for airborne equipment is feasible.The COP,cooling capacity and entropy generation of the system are relative to the flight altitude and the current of the TRS.Through the analyses of these data,the optimal values of the COP are obtained,and the optimization measures are proposed to maximize the use of the advantages of the TRS.

Working Condition Real-Time Monitoring Model of Lithium Ion Batteries Based on Distributed Parameter System and Single Particle Model

Lithium ion batteries are complicated distributed parameter systems that can be described preferably by partial differential equations and a field theory. To reduce the solution difficulty and the calculation amount, if a distributed parameter system is described by ordinary differential equations （ODE） during the analysis and the design of distributed parameter system, the reliability of the system description will be reduced, and the systemic errors will be introduced. Studies on working condition real-time monitoring can improve the security because the rechargeable LIBs are widely used in many electronic systems and electromechanical equipment. Single particle model （SPM） is the simplification of LIB under some approximations, and can estimate the working parameters of a LIB at the faster simulation speed. A LIB modelling algorithm based on PDEs and SPM is proposed to monitor the working condition of LIBs in real time. Although the lithium ion concentration is an unmeasurable distributed parameter in the anode of LIB, the working condition monitoring model can track the real time lithium ion concentration in the anode of LIB, and calculate the residual which is the difference between the ideal data and the measured data. A fault alarm can be triggered when the residual is beyond the preset threshold. A simulation example verifies that the effectiveness and the accuracy of the working condition real-time monitoring model of LIB based on PDEs and SPM.

Current Share Control IC Design for Paralleled DC/DC Converters

To keep even current distribution among DC/DC converters in a paralleled power system,an automatic master-slave control （AMSC） current sharing scheme is presented,which was implemented by a current share control IC. A current feedback loop for output voltage adjustment is proposed for low signal distortion. Moreover,a special startup control logic is designed to improve startup timing and to speed up the initial current sharing. It was completed in 1.5μm bipolar-CMOS-DMOS （BCD） technology with an area of 3.6mm^2 . Using it,a paralleled power system of two DC/DC converters capable of outputting 12V/3A was built. Experimental results show that the current sharing error at full load is kept within 1%.

Effect of Surface Potential Barrier on the Electron Energy Distribution of NEA Photocathodes

By calculating the energy distribution of electrons reaching the photocathode surface and solving the Schrodinger equation that describes the behavior of an electron tunneling through the surface potential barrier,we obtain an equation to calculate the emitted electron energy distribution of transmission-mode NEA GaAs photocathodes. Accord- ing to the equation,we study the effect of cathode surface potential barrier on the electron energy distribution and find a significant effect of the barrier-Ⅰ thickness or end height,especially the thickness,on the quantum efficiency of the cath- ode. Barrier Ⅱ has an effect on the electron energy spread, and an increase in the vacuum level will lead to a narrower electron energy spread while sacrificing a certain amount of cathode quantum efficiency. The equation is also used to fit the measured electron energy distribution curve of the transmission-mode cathode and the parameters of the surface barri- er are obtained from the fitting. The theoretical curve is in good agreement with the experimental curve.

Membrane redistributions through multi-intercellular exchanges and serial trogocytosis

Trogocytosis is a rapid transfer between cells of membranes and associated proteins. Trogocytic exchanges have been investigated between different cell types, mainly in two-cell systems, involving one donor and one acceptor cell type. Here, we studied trogocytosis in a more complex system, involving not only several immune cell subsets but also multiple tumor cells. We show that CD4~ T cells, CD8＋ T cells and monocytes can acquire membrane patches and the intact proteins they contain from different tumor cells by multiple simultaneous trogocytoses. The trogocytic ca- pabilities of CD4~ and CD8~ T cells were found to be similar, but inferior to that of autologous monocytes. Activated peripheral-blood mononuclear cells （PBMCs） may also exchange membranes between themselves in an all-autolo- gous system. For this reason, monocytes are capable of acquiring membranes from multiple tumor cell sources, and transfer them again to autologous T cells, along with some of their own membranes （serial trogocytosis）. Our data illustrate the extent of membrane exchanges between autologous activated immune effector cells and their environ- ment, and how the cellular content of the local environment, including ＂bystander＂ cells, may impact the functions of immune effector cells.

Efficient photoelectrocatalytic CO_2 reduction by cobalt complexes at silicon electrode

Two homogeneous photoelectrocatalytic systems composed of simple polypyridyl Co complexes[Co(tpy)2](PF6)2and[Co(bpy)3](PF6)2as electrocatalysts and a Si wafer as the photoelectrode were used for combined photoelectrochemical reduction of CO2to CO.A high photocurrent density of1.4mA/cm2was observed for the system with the[Co(tpy)2](PF6)2catalyst and a photovoltage of400mV was generated.Faradaic efficiencies of CO were optimized to83%and94%for the[Co(tpy)2](PF6)2and[Co(bpy)3](PF6)2complexes,respectively,in acetonitrile solution with10%methanol(volume fraction,same below)as a protic additive.Addition of2%water volume fraction induced a large amount of non‐specific H2evolution by the Si photoelectrode.

Similarity theory based method for MEMS dynamics analysis

A new method for MEMS dynamics analysis is presented,ased on the similarity theory. With this method, two systems' similarities can be captured in terms of physics quantities/governed-equations amongst different energy fields, and then the unknown dynamic characteristics of one of the systems can be analyzed according to the similar ones of the other system. The probability to establish a pair of similar systems among MEMS and other energy systems is also discussed based on the equivalent between mechanics and electrics, and then the feasibility of applying this method is proven by an example, in which the squeezed damping force in MEMS and the current of its equivalent circuit established by this method are compared.

Lyapunov-Krasovskii functional based power system stability analysis in environment of WAMS

In order to analyze power system stability in environment of WAMS(wide area measurement system),a new steady state stability model with time-varying delay was proposed for power system.The factors of exciter and power system stabilizer with delay were introduced into analytical model.To decrease conservativeness of stability analysis,an improved Lyapunov-Krasovskii functional was constructed,and then a new delay-dependent steady state stability criterion for power system,which overcomes the disadvantages of eigenvalue computation method,was derived.The proposed model and criterion were tested on synchronous-machine infinite-bus power system.The test results demonstrate that Lyapunov-Krasovskii functional based power system stability analysis method is applicable and effective in the analysis of time delay power system stability.

Application of fractal theory in detecting low current faults of power distribution system in coal mines

Single-phase low current grounding faults areoften seen in power distribution system of coal mines.These faults are difficult to reliably identify.We propose a new method of single-phase ground fault protection based upon a discernible matrix of the fractal dimension associated with line currents.The method builds on existing selective protection methods.Faulted feeders are distinguished using differences in the zero-sequence transient current fractal dimension.The current signals were first processed through a fast Fourier transform and then the characteristics of a faulted line were identified using a discernible matrix.The method of calculation is illustrated.The results show that the method involves simple calculations, is easy to do and is highly accurate.It is, therefore, suitable for distribution networks having different neutral grounding modes.

Application of Laser Dispersion Method in Apparatus Combining H Atom Rydberg Tagging Time-of-Flight Technique with Vacuum Ultraviolet Free Electron Laser

Photodissociation of H2S in the VUV region plays an important role in the atmospheric chemistry and interstellar chemistry.To date,however,few studies have been focused on this topic.In this article,we have described a laser dispersion method applied in the apparatus combining the high-n H atom Rydberg tagging time-of-flight technique with the vacuum ultraviolet free electron laser(VUV FEL).The Lyman-αlaser beam(121.6 nm)used in the H-atom detection was generated by the difference frequency four-wave mixing schemes in a Kr/Ar gas cell.After passing through an off-axis biconvex LiF lens,the 121.6 nm beam was dispersed from the 212.6 nm and 845 nm beams due to the different deflection angles experienced by these laser beams at the surfaces of the biconvex lens.This method can eliminate the background signal from the 212.6 nm photolysis.Combined with the VUV FEL,photodissociation of H2S at 122.95 nm was studied successfully.The TOF spectrum was measured and the derived total kinetic energy release spectrum was displayed.The results suggest that the experimental setup is a powerful tool for investigating photodissociation dynamics of molecules in the VUV region which involves the H-atom elimination processes.

Research and practice of designing hydro/ photovoltaic hybrid power system in microgrid

Small-hydro power station is often used in remote areas beside a river,but it doesn't match electricity demand so well,especially in dry seasons. A photovoltaic (PV) system with battery is a suitable option to complement the electricity gap. In this paper,a new structure of megawatt-class PV system integrating battery at DC-bus (DC: direct current) is proposed to be used in hydro/PV hybrid power system,and 4 main designing considerations and several key equipments are discussed. In 2011,a 2 MWp PV station with the proposed structure was built up in Yushu,China. From stability analysis,the station shows a strong stability under load cut-in/off and solar irradiance's fluctuation.

AN ANALYSIS METHOD FOR HIGH-SPEED CIRCUIT SYSTEMS

A new method for analyzing high-speed circuit systems is presented. The method adds transmission line end currents to the circuit variables of the classical modified nodal approach. Then the matrix equation describing high-speed circuit system can be formulated directly and analyzed conveniently for its normative form. A time-domain analysis method for transmission lines is also introduced. The two methods are combined together to efficiently analyze high-speed circuit systems having general transmission lines. Numerical experiment is presented and the results are compared with that calculated by Hspice.

Models and Methods for Urban Power Distribution Network Planning

The models, methods and their application experiences of a practical GIS(geographic information system)-based computer decision-making support system of urban power distribution network planning with seven subsystems,termed CNP,are described.In each subsystem there is at least one or one set of practical mathematical methobs.Some new models and mathematical methods have been introduced.In the development of CNP the idea of cognitive system engineering has been insisted on,which claims that human and computer intelligence should be combined together to solve the complex engineering problems cooperatively.Practical applications have shown that not only the optimal plan can be automatically reached with many complicated factors considered, but also the computation,analysis and graphic drawing burden can be released considerably.

A Cogeneration System for an Apartment Building Based on Distributed Heat Storage Technology

In order for economically viable distributed generation systems for apartment buildings to spread, it is essential to develop an efficient and low-cost heat supply system. We have developed a new eogeneration system called the Neighboring Cogeneration system （NCG）. The key concept of this system is to install a heat accumulator with a hot water supply and a room heating function at each household and to connect different households by a single loop of hot water pipe. As a result, time leveling of the heat supply and heat transferring among households becomes possible. Thus, the costs of the pipe and the heat source equipment decrease. Furthermore, because all of the heat accumulators store heat, the total heat storage capacity is large enough for cogeneration to generate exhaust heat according to the electricity demand and with a high operating rate. In this paper, we report the results of the NCG system for 7 lived-in households. The controlling system worked efficiently. All of the households were able to use hot water without any difficulties. Further, we report the results of the energy saving effect of the NCG system for 50 lived-in households by means of a simulation based on the experimental results for NEXT21.

Autonomous Optimal Coordination Scheme in Protection System of Power Distribution Network by Using Multi-Agent Concept

A protection system using a multi-agent concept for power distribution networks is proposed.Every digital over current relay(OCR)is developed as an agent by adding its own intelligence,self-tuning and communication ability.The main advantage of the multi-agent concept is that a group of agents work together to achieve a global goal which is beyond the ability of each individual agent.In order to cope with frequent changes in the network operation condition and faults,an OCR agent,proposed in this paper,is able to detect a fault or a change in the network and find its optimal parameters for protection in an autonomous manner considering information of the whole network obtained by communication between other agents.Through this kind of coordination and information exchanges,not only a local but also a global protective scheme is completed.Simulations in a simple distribution network show the effectiveness of the proposed protection system.

Modeling of D-STATCOM in distribution systems load flow

This paper presents modeling of Distribution STATCOM (D-STATCOM) in load flow calculations for the steady- state voltage compensation. An accurate model for D-STATCOM is derived to use in load flow calculations. The rating of this device as well as the direction of required reactive power injection for voltage compensation in the desired value (1 p.u.) is de- rived and discussed analytically and mathematically by the phasor diagram method. Furthermore, an efficient method for node and line identification used in load flow calculations is presented. The validity of the proposed model is examined by using two standard distribution systems consisting of 33 and 69 nodes, respectively. The best location of D-STATCOM for under voltage problem mitigation approach in the distribution networks is determined. The results validate the proposed model for D- STATCOM in large distribution systems.