水泥库环板基础与条形基础分界的分析

水泥库基础中,主要基础形式有桩基础、整板基础、环板基础、条形基础。其中环板基础和条形基础外形很类似,但是配筋特点不尽相同,在特定条件下对两种基础形式的分界进行探讨分析,意义重大。

论成本利润分析在企业决策中的应用

从贡献分析法、盈亏分界点分析法、边际分析法对成本利润进行研究 ,以判断企业的经营状况、预测一定销售量下的利润水平、确定企业的目标成本 。

利用成本收入分析进行经营决策

成本收入分析(Cost-revenue Analysis)名称甚多,如也称两平分析(Break-even Analysis)或盈亏分岐点分析、盈亏分界点分析,是管理企业的一项重要分析工具。在经济发达国家被广泛使用。用于预测在各种情况下的收入和成本情况、分析未完成预定利润目标的原因,从而考虑各种可能采取的措施、迅速求出可能达到的结果。这些结果可以帮助管理人员作出明智的决策,也就是充分考虑经济效果的决策。

Vertical distributions of VOCs in the Tibetan Plateau background region

Exploring the vertical variation in volatile organic compounds(VOCs)in background regions can provide infor-mation on the spatial distribution of pollutants,providing a scientific basis for atmospheric pollution prevention and control strategies.From 15 August to 5 September 2023,at the Southeast Tibet Mountain Comprehensive Environmental Observation Station(SETS),a tethered balloon was used to sample VOCs every 100 m from the ground to 1000 m.A total of 403 air bag samples were collected,and 39 vertical profiles of VOCs were obtained.Ninety-two VOC species were detected.The VOC concentration at the SETS did not change significantly verti-cally,and the average VOC concentration was 11.1±2.4 ppbv.The main components were alkanes(51.4%),alkenes(18.7%),and halohydrocarbons(18.1%).There was no obvious diurnal change in VOCs and no signif-icant difference between the different layers.When the surface VOC concentration was less than 10 ppbv,the concentrations,components,and sources of VOCs were evenly distributed vertically,and the main sources of VOCs at different heights were vehicle exhaust and background.When the surface VOC concentration exceeded 10 ppbv,the VOC concentration gradually decreased with height.The proportion of alkanes in surface VOCs in-creased,and the source was mainly vehicle exhaust.This study confirmed that VOCs are vertically homogeneous in the background of the Tibetan Plateau,emphasizing the importance of vehicle emissions as a potential source of VOCs.

Data mining and well logging interpretation: application to a conglomerate reservoir

Data mining is the process of extracting implicit but potentially useful information from incomplete, noisy, and fuzzy data. Data mining offers excellent nonlinear modeling and self-organized learning, and it can play a vital role in the interpretation of well logging data of complex reservoirs. We used data mining to identify the lithologies in a complex reservoir. The reservoir lithologies served as the classification task target and were identified using feature extraction, feature selection, and modeling of data streams. We used independent component analysis to extract information from well curves. We then used the branch-and- bound algorithm to look for the optimal feature subsets and eliminate redundant information. Finally, we used the C5.0 decision-tree algorithm to set up disaggregated models of the well logging curves. The modeling and actual logging data were in good agreement, showing the usefulness of data mining methods in complex reservoirs.

基于功能点COCOMO Ⅱ估算模型的应用

使用COCOM0Ⅱ模型进行软件成本估算，可以将经济分析的一般概念和技术与软件工程紧密地联系起来；可以帮助项目经理测定各个软件开发阶段所需要的时间和工作量；可以进行软件的成本效益分析、盈亏分界分析及用户作出是否自主开发的决策。

A Chip Level Thermal Analysis Algorithm Using Boundary Element Method

With the scale of integration and operation speed of modern ICs increasing,a series of thermo-related problems arise.Hot spots,which are due to the uneven distribution of heat,invalidate some functions of the chip.An algorithm is presented to calculate the profile.With the boundary element method,3D problems are converted into 2D ones,so the temperatures of both the chip surface and inner points can be calculated quickly.This algorithm can be used to evaluate the thermal quality of a definite chip.

On the Asymptotic Behavior of Certain Second Order Differential Equations

Two criteria for asymptotic behavior of certain second order differential equations are obtained. The results extend and improve Feng's theorem.

Geometrical nonlinear stability analyses of cable-truss domes

The nonlinear finite element method is used to analyze the geometrical nonlinear stability of cable truss domes with different cable distributions. The results indicate that the critical load increases evidently when cables, especially diagonal cables, are distributed in the structure. The critical loads of the structure at different rise span ratios are also discussed in this paper. It was shown that the effect of the tensional cable is more evident at small rise span ratio. The buckling of the structure is characterized by a global collapse at small rise span ratio; that the torsional buckling of the radial truss occurs at big rise span ratio; and that at proper rise span ratio, the global collapse and the lateral buckling of the truss occur nearly simultaneously.

管理经济学在质量成本决策中的应用

本文就管理经济学在质量成本决策中的应用进行了探讨,论述了质量成本决策中存在的问题,提出将管理经济学中的盈亏分界点分析法应用于质量成本决策中,达到质量、成本与利润的最优化。

The classification and analysis of dynamic networks

In this paper we, firstly, classify the complex networks in which the nodes are of the lifetime distribution. Secondly, in order to study complex networks in terms of queuing system and homogeneous Markov chain, we establish the relation between the complex networks and queuing system, providing a new way of studying complex networks. Thirdly, we prove that there exist stationary degree distributions of M-G-P network, and obtain the analytic expression of the distribution by means of Markov chain theory. We also obtain the average path length and clustering coefficient of the network. The results show that M-G-P network is not only scale-free but also of a small-world feature in proper conditions.

Effectiveness of Nature Reserves for Natural Forests Protection in Tropical Hainan: a 20 Year Analysis

The establishment of nature reserves is a key approach for biodiversity conservation worldwide. However, there is a lack of unified methodology to evaluate the effectiveness of nature reserves, particularly in China, the world′s most populous nation supporting some of the most valuable biodiversity hotspots in the world. In this study, we conducted a long-term and large-scale analysis of the effectiveness of 20 of the earliest nature reserves established in Hainan Province, an island home to among the highest concentration of plants and animals in China. Remote sensing imagery from 1988, 1998, and 2008 were analyzed to investigate the temporal and spatial changes of natural forests in these nature reserves and surrounding areas. We also conducted transition matrix analysis and principle component analysis to identify the driving factors that affect the protection effectiveness of nature reserves. The results were as follows: 1) During the 20-year period from 1988 to 2008, natural forests coverage of the 20 studied nature reserves dropped 2.34 percentage points, whereas the natural forests coverage dropped 11.31 percentage points in a 0–5 km outside reserve buffer and 9.36 percentage points in a 5–10 km outside reserve buffer, indicating a significant inhibitory effect of the nature reserves on the loss of natural forests. 2) Natural forests coverage dropped in 60% of the studied nature reserves during the 20-year period, suggesting a poor protection effectiveness of these reserves, while the coverage proportion showed some increase(0%/yr–5%/yr) in other reserves. 3) Expansion of rubber and pulp forests as part of a booming economy were the main factors affecting the effectiveness of the nature reserves for conserving natural forests in Hainan Province. The results of this study provide an important empirical basis for the protection of natural forests in Hainan Province, which can be used as a blueprint for nature reserve evaluation in other places in China.

Thermo-mechanical analysis of an SI engine piston using different boundary condition treatments

Heat transfer of an SI engine's piston is calculated by employing three different methods based on resistor-capacitor model with the help of MATLAB code, and then the piston is thermo-mechanically analyzed using commercial ANSYS code. The results of three methods are compared to study their effects on the piston thermal behavior. It is shown that resistor-capacitor model with less number of equations and consequently less solution time, is an appropriate method for solving problems of engine piston heat transfer. In the second part, the thermal stresses due to non-uniform temperature distribution, and mechanical stresses due to mechanical loads are calculated. Finally, the temperature distributions as a thermal load along with mechanical loads are applied to the piston to determine the total stress distribution and critical fracture zones. It is found that the amount of thermal stresses is considerable.

Application of whole body diffusion weighted imaging in bone metastasis

Objective： We evaluated （Whole-Body Diffusion Weighted Imaging, WB-DWl） application in bone metastasis. Methods： WB-DWI with GE 1.5T MR/I was performed on 10 healthy volunteers and 35 patients. WB-DWl and ECT was performed in all 35 patients. Using WB-DWl for detecting bone metastasis and compared them with that of ECT. Results： Background was suppressed in WB-DWl, fat, muscle, vessels and liver appeared same as background. Skeleton showed medium or slightly lower signal. Lymph nodes, some glandular organs, kidneys displayed medium signal. Spleen, testicle, brain tissue were low signal. Bladder, gallbladder were depicted as low signal because of ＂T2 through＂. Bone metastasis were multitude and inequality of size, punctiform, nodosity, column low intensity. Concordance between WB-DWI and ECT was seen in 4 cases. WB-DWl displayed 1 bone metastasis on skull, 46 on rib and sternum, 3 on scapula, 4 on extremities, 83 on vertebral, 36 on pelvic bone. ECT showed 2 bone metastasis on skull, 62 on rib and sternum, 7 on scapula, 9 on extremities, 64 on vertebral, 19 on pelvic bone. WB-DWl was 74% for bone metastasis on rib and sternum, ECT was 77%, 53% for vertebral and pelvic bone. All of the focus were statistics analyses, P 〈 0.05. Total probability distribution inequality if metastasis on different positions. Conclusion： WB-DWI was an effective imaging technology for screening bone metastasis.

Urban Expansion in China Based on Remote Sensing Technology：A Review

Urban areas and its evolution are important anthropogenic indicators and human ecological footprints, and play decisive roles in environmental change analysis, global geo-conditional monitoring, and sustainable development. China has the highest rate of urban expansion and has emerged as an urban expansion hotspot worldwide. In this paper, the progress of studies on Chinese urban expansion based on remote sensing technology are summarized and analyzed from the aspects of urban area definition, remotely sensed imagery applied in urban expansion, monitoring methods of urban expansion, and urban expansion applications. Existing issues and future directions of Chinese urban expansion are discussed and proposed. Results indicate that: 1) The fusion of multi-source remotely sensed imagery is imperative to meet the needs of urban expansion with various monitoring terms and frequencies on different scales and dimensions. 2) To guarantee the classification accuracy and efficiency and describe urban expansion and its influences on local land use simultaneously, the combination of visual interpretation and automatic classification is the tendency of future monitoring methods of urban areas. 3) Urban expansion data have become the prerequisite for recognizing the urban development process, excavating its driving forces, simulating and predicting the future development directions, and also is conducive to revealing and explaining urban ecological and environmental issues. 4) In the past decades, Chinese scholars have promoted the application of remote sensing technology in the urban expansion field, with data construction, methods and models developing from the quotation stage to improvement and innovation stage; however, an independent and consistent urban expansion data on the national scale with long-term and high-frequency(such as annual monitoring) monitoring is still lacking.

Static Analysis of Buried Pipes Using Coupling between Layerwise Finite Element and Boundary Element Method

This work deals with the analysis of soil-structure interaction modeling of pipeline problems in static behavior using the coupling between FEM （finite element method） and BEM （boundary element method）. The representation of the pipe is made by MEF using one fmite element in the cylindrical panel formulated from the theory of equivalent discrete layers （Layerwise theory）, proposed by J. N. Reddy. The soil is represented by elastic continum infimite or semi-infinite and modeled using boundary elements with special curved surface, associated with cylindrical panel used to represent the soil-structure interaction within the soil, especially at the contact surface with the pipe.

Flexural and eigen-buckling analysis of steel-concrete partially composite plates using weak form quadrature element method

Flexural and eigen-buckling analyses for rectangular steel-concrete partially composite plates(PCPs)with interlayer slip under simply supported and clamped boundary conditions are conducted using the weak form quadrature element method(QEM).Both of the derivatives and integrals in the variational description of a problem to be solved are directly evaluated by the aid of identical numerical interpolation points in the weak form QEM.The effectiveness of the presented numerical model is validated by comparing numerical results of the weak form QEM with those from FEM or analytic solution.It can be observed that only one quadrature element is fully competent for flexural and eigen-buckling analysis of a rectangular partially composite plate with shear connection stiffness commonly used.The numerical integration order of quadrature element can be adjusted neatly to meet the convergence requirement.The quadrature element model presented here is an effective and promising tool for further analysis of steel-concrete PCPs under more general circumstances.Parametric studies on the shear connection stiffness and length-width ratio of the plate are also presented.It is shown that the flexural deflections and the critical buckling loads of PCPs are significantly affected by the shear connection stiffness when its value is within a certain range.

Thermodynamics of Third Order Lovelock Anti-de Sitter Black Holes Revisited

We compute the mass and temperature of third order Lovelock black holes with negative Gauss-Bonnet coefficient a2 〈 0 in anti-de Sitter space and perform the stability analysis of topological black holes. When k = -1, the third order Lovelock black holes are thermodynamically stable for the whole range r＋. When k = 1, we found that the black hole has an intermediate unstable phase for D = 7. In eight dimensional spacetimes, however, a new phase of thermodynamically unstable small black holes appears if the coefficient a is under a critical value. For D ≥ 9, black holes have similar the distributions of thermodynamically stable regions to the case where the coefficient ＆ is under a critical value for D = 8. It is worth to mention that all the thermodynamic and conserved quantities of the black holes with fiat horizon do not depend on the Loveloek coefficients and are the same as those of black holes in general gravity.

Displacement of Building Cluster Using Field Analysis Method

This paper presents a field based method to deal with the displacement of building cluster, which is driven by the street widening. The compress of street boundary results in the force to push the building moving inside and the force propagation is a decay process. To describe the phenomenon above, the field theory is introduced with the representation model of isoline. On the basis of the skeleton of Delaunay triangulation, the displacement field is built in which the propagation force is related to the adjacency degree with respect to the street boundary. The study offers the computation of displacement direction and offset distance for the building displacement. The vector operation is performed on the basis of grade and other field concepts.

Modeling of Water Vapor Condensation by Using Computer Methodology

The excessive moisture has an adverse effect on the building materials structure. Most standard construction materials are characterized by porous structure, resulting in the ability to absorb water in liquid and gaseous phases in the inner pores. Under certain conditions, water fills the pores within the structure of building material and then moves back to its surrounding. Many technical studies have shown that monitoring the moisture transport is mainly based on experimental methods. This work is based on models of transport of moisture in building physics, i.e., the description of the moisture behaviour of building materials based on physical laws models （KRISCHER, KIESSL）. The aim of this work is to obtain the parameters of distribution of moisture for calculation capillary conductivity coefficient for practical using by means of non-destructive method. The authors have now developed all the software required to perform a boundary element analysis of problems in potential flow. The examples which the authors can analyse will, however, be restricted to homogenous domains.