期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
磨煤机分离器减速机进煤粉问题及解决方法
1
作者 石慧军 王海军 赵国军 《内蒙古石油化工》 CAS 2016年第1期39-40,共2页
主要介绍DF-90辊式磨煤机分离器减速机长期进煤粉的问题,分析其原因,提出相应的解决方法,通过改造后的分离器减速机,使用效果良好,延长了运行周期,有效解决了生产瓶颈制约,大大延长了煤气化装置的运行周期,经济效益显著。
关键词 磨煤机 分离减速 煤粉
下载PDF
潜伏式武器水下施放后纵平面运动仿真 被引量:1
2
作者 练永庆 宋保维 李宗吉 《水下无人系统学报》 北大核心 2019年第4期413-419,共7页
为了研究潜伏式武器自潜艇外部施放后在纵平面内的运动规律以及使用分离减速方案实现安全坐底的可行性,将武器施放后的运动过程分为2个阶段,第1阶段为武器下沉直至分离前,第2阶段为武器分离开始直至武器完全坐底。针对这2个不同的运动... 为了研究潜伏式武器自潜艇外部施放后在纵平面内的运动规律以及使用分离减速方案实现安全坐底的可行性,将武器施放后的运动过程分为2个阶段,第1阶段为武器下沉直至分离前,第2阶段为武器分离开始直至武器完全坐底。针对这2个不同的运动阶段分别推导了相关数学模型,并进行了整个运动过程的仿真计算,分析了潜伏式武器水下施放后初始阶段的运动特性,得出了分离减速坐底的规律。仿真结果证明了潜伏式武器采用分离减速方案可安全坐底。 展开更多
关键词 潜伏式武器 分离减速 纵平面运动
下载PDF
Ultrasonic Study on Charge Ordering in Nd0.5Ca0.5Mn1-xAlxO3(x=0,0.03)
3
作者 刘毅 孔辉 +1 位作者 苏金瑞 朱长飞 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 北大核心 2006年第6期535-538,共4页
The ultrasonic, magnetic and transport properties of Nd0.5Ca0.5Mn1-xAlxO3 (x=0, 0.03) were studied from 15 to 300 K. The temperature dependencies of resistivity and magnetization show that Nd0.5Ca0.5MnO3 undergoes a... The ultrasonic, magnetic and transport properties of Nd0.5Ca0.5Mn1-xAlxO3 (x=0, 0.03) were studied from 15 to 300 K. The temperature dependencies of resistivity and magnetization show that Nd0.5Ca0.5MnO3 undergoes a charge ordering transition at TCO-257 K. An obvious softening of the longitudinal sound velocity above TCO and a dramatic stiffening below Too accompanied by an attenuation peak were observed. These features imply a strong electron phonom interaction via the Jahn-Teller effect iu the sample, Another broad attenuation peak was observed at around Tp-80 K. This anomaly is attributed to the phase separtion between the antiferromagnetic (AFM) and paramagnetic (PM) phases and gives a direct evidence for spin-phonon coupling in the compound. For the x=0.03 sample, both the minimum of sound velocity and attenuation peaks shift to a lower temperature. The results indicate that the charge ordering and CE-type AFM state in Nd0.5Ca0.5MnO3 are both partially suppressed by replacing Mn with A1. 展开更多
关键词 MANGANITE Charge ordering Phase separation Ultrasonic velocity and attenuation
下载PDF
XH2418定梁龙门加工中心由济南二机床集团有限公司生产制造
4
《机电新产品导报》 2003年第8期82-82,共1页
结构特点: 机床大件采用钢板焊接结构或铸铁件结构。为保证焊接的焊接质量,钢板焊前均进行表面喷丸、涂漆、烘干处理,提高了钢板表面质量和防锈能力;全部焊接件和铸铁件均已进行热实效处理,最大限度地消除了焊接和铸造应力。
关键词 定梁龙门加工中心 济南二机床集团有限公司 钢板焊接结构 铸铁件结构 减速分离式设计 技术参数
下载PDF
Corner Separations around a NACA65 Blade in a Decelerating Flow (Experimental Investigations by Five-Hole Probe and PIV) 被引量:1
5
作者 Yoichi Kinoue Ryutaro Ohhira +1 位作者 Norimasa Shiomi Toshiaki Setoguchi 《Journal of Thermal Science》 SCIE EI CAS CSCD 2013年第1期23-28,共6页
In order to examine the fundamental characteristics of corner separation in a decelerating cascade flow,the experimental apparatus was made and separations around a NACA65 blade in a decelerating channel flow were exa... In order to examine the fundamental characteristics of corner separation in a decelerating cascade flow,the experimental apparatus was made and separations around a NACA65 blade in a decelerating channel flow were examined.Two-dimensional calculations show that the NACA65 cascade flow that has 45 deg.of turning,1.24 of solidity and 17 deg.of stagger angle is equivalent to the channel flow that has 14 deg.of stagger angle in terms of pitchwise blade force.Experimental investigation by five-hole probe shows that the accumulations of low energy fluid can be seen around the corner part and the overturning flow due to the secondary flow exists.And,as the periodicity of the blade wake in a pitchwise direction is comparably good,the wake of this channel flow is similar to the wake of the cascade flow for two pitch portion.PIV measurement results shows that a vortex pattern can be seen in the momentary streamline on the suction surface of the blade and in the averaged streamline on the perpendicular to both the suction surface and the endwall. 展开更多
关键词 corner separation NACA65 blade decelerating channel flow five-hole probe PIV
原文传递
Vortices within the Separation Region in a Decelerating Channel Flow (Effect of Inlet Velocity Gradient)
6
作者 Yoichi KINOUE Toshiaki SETOGUCHI +2 位作者 Mohammad MAMUN Norimasa SHIOMI Kenji KANEKO 《Journal of Thermal Science》 SCIE EI CAS CSCD 2005年第4期341-345,共5页
An experimental investigation was made into three-dimensional separated flow and the vortices within the flow separation in a decelerating channel flow generated by the suction from a porous side wall. The flows along... An experimental investigation was made into three-dimensional separated flow and the vortices within the flow separation in a decelerating channel flow generated by the suction from a porous side wall. The flows along the side and bottom walls were visualized by the surface tuft method. The turbulent internal flow was measured by the split-film probe to investigate the turbulent flow including the reverse flow. In the flow visualization for the strong decelerating flow (the suction flow ratio:0.8), two typical flow patterns appear alternatively. One is that the flow near the bottom wall separates more upstream than the flow near the top wall and a clockwise vortex can be seen in the separation region. Another is the reversal flow pattern with a counterclockwise vortex. By the turbulent flow measurement using the split-film probe, two peaks of turbulence level are observed for the strong decelerating flow case. These peaks can be related with two flow patterns mentioned above. 展开更多
关键词 vortices within the separation decelerating channel flow turbulent flow split-film probe
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部