期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
大功率LED封装颗粒模具成型分离工艺设计
1
作者 赵战锋 《现代制造技术与装备》 2017年第1期25-26,共2页
简述大功率LED器件的机械组成,剖析其引脚弯曲成型特点,制定LED颗粒的引脚折弯工艺,并结合全自动冲压技术,设计了颗粒和框架分离的模具机构,为LED颗粒封装后的制程设计了高效率的模具方案,从而为类似产品全自动模具设计提供了有益借鉴。
关键词 大功率 LED封装 分离成型 冲压模
下载PDF
基于机器视觉的芯片成型分离视觉检测系统的研究 被引量:6
2
作者 汤晓燕 《软件导刊》 2009年第4期72-74,共3页
芯片引脚是否合格,是成型分离制程检测的关键。针对这一问题,应用机器视觉和机器自动化技术,研制出实现成型分离制程芯片检测自动化的检测系统。实验测试表明,该设备具有较高的检测精度和检测速度,能够满足生产需要。
关键词 成型分离 机器视觉 自动化检测
下载PDF
基于Delphi2010的IC成型与分离系统控制软件设计
3
作者 余炽业 宋跃 胡胜 《仪表技术与传感器》 CSCD 北大核心 2012年第5期65-66,70,共3页
介绍如何利用Delphi2010开发出了IC成型与分离系统控制软件,采用Delphi的控件结合Object Pascal语言编程的方法,以PCI控制卡为接口,实现了对集成电路成型与分离设备的监控,完成上料、传送机台、工作台、冲头伺服电机等传感器信号进行处... 介绍如何利用Delphi2010开发出了IC成型与分离系统控制软件,采用Delphi的控件结合Object Pascal语言编程的方法,以PCI控制卡为接口,实现了对集成电路成型与分离设备的监控,完成上料、传送机台、工作台、冲头伺服电机等传感器信号进行处理,并在界面上显示。同时,依据用户设置的参数自动输出X、Y、Z和A轴的伺服器的控制信号。实验表明该软件界面友好、使用方便、调节灵活、可移植性强,很好地实现了IC成型与分离系统的人机交互功能,实验表明该设计方法是行之有效的。 展开更多
关键词 集成电路 成型分离设备 人机界面 上位机软件 DELPHI
下载PDF
Green Process for Synthesis of Zeolite with MFI Structure
4
作者 Yin Xiping 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2005年第2期33-36,共4页
A clean and environmentally friendly new process for synthesis of zeolite with MFI structure was presented. This process through recycling of vented gas and mother liquor can reduce or avoid discharge of nitrogen-cont... A clean and environmentally friendly new process for synthesis of zeolite with MFI structure was presented. This process through recycling of vented gas and mother liquor can reduce or avoid discharge of nitrogen-containing offgas and waste liquid without affecting the physical and chemical properties of synthetic zeolite, leading to green synthesis of zeolite. This process can help to cut corners on production cost to achieve the sustainable development. 展开更多
关键词 MFI ZEOLITE green SYNTHESIS
下载PDF
Study of SAR imaging with COMPASS signal 被引量:5
5
作者 YE JiHai JIANG YueSong +1 位作者 ZHAO JiZhi GUO JingPing 《Science China(Physics,Mechanics & Astronomy)》 SCIE EI CAS 2011年第6期1051-1058,共8页
A concept of space-surface bistatic synthetic aperture radar (SS-BSAR) passive imaging system is proposed,which is parasitic on the signal of COMPASS Navigation Satellite System (CNSS).The feasibility is demonstrated ... A concept of space-surface bistatic synthetic aperture radar (SS-BSAR) passive imaging system is proposed,which is parasitic on the signal of COMPASS Navigation Satellite System (CNSS).The feasibility is demonstrated by analyzing the signal ambiguity function and the range resolution as well as the system topology.Due to the multiple peaks of signal in the auto-correlation function,a new correlation is used to remove the side-peaks.A double-channel receiver is employed to receive the direct satellite signal and the ground reflected signal.The direct signal is a reference signal in range compression,and may also be used for transmitter-receiver signal synchronization.The reflected signal is raw data collected for imaging.Then,a modified range-Doppler imaging algorithm is derived based on the system geometric models and BSAR imaging principle.The proposed algorithm is verified via signal simulation.The work in this paper is of great value to the further use of COMPASS signal,as well as other global navigation satellite signals in passive imaging. 展开更多
关键词 COMPASS navigation satellite system (CNSS) space-surface BSAR (SS-BSAR) range-Doppler (RD) algorithm passive imaging
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部