The discrete element method(DEM) has been widely used to simulate microscopic interactions between particles.Screening is a deeply complicated process when considering the law of motion for the particles,themselves.In...The discrete element method(DEM) has been widely used to simulate microscopic interactions between particles.Screening is a deeply complicated process when considering the law of motion for the particles,themselves.In this paper,a numerical model for the study of a particle screening process using the DEM is presented.Special attention was paid to the modeling of a vibrating screen that allows particles to pass through,or to rebound,when approaching the screen surface.Inferences concerning screen length and vibrating frequency as they relate to screening efficiency were studied.The conclusions were:three-dimensional simulation of screening efficiency along the screen length follows an exponential distribution;when the sieve vibrates over a certain frequency range the screening efficiency is stable;and,higher vibration frequencies can improve the handling capacity of the screening machine.展开更多
Droplet turbulence effect on gas-water separator with corrugated plates is explored using the Eulerian-Lagrangian two-way coupled multiphase approach of FLUENT. It is concluded that the inertial force is dominant in s...Droplet turbulence effect on gas-water separator with corrugated plates is explored using the Eulerian-Lagrangian two-way coupled multiphase approach of FLUENT. It is concluded that the inertial force is dominant in separating large droplets, while droplet turbulence dispersion plays a decisive role in separating fine droplets. Good agreement exists between calculations and air-water experiments. The numerical method developed provides a rea-sonable description of the droplet trajectories and separating efficiency, and it can be applied to predicting the performance of gas-water separator with corrugated plates.展开更多
Magnetophoresis is one of the most important separation methods in biological and chemical engineering. In this paper,a novel impact parameter on separation efficiency,i.e.,the angle between the vectors of magnetic fo...Magnetophoresis is one of the most important separation methods in biological and chemical engineering. In this paper,a novel impact parameter on separation efficiency,i.e.,the angle between the vectors of magnetic force and fluid velocity,was derived from the basic equation describing the motion of magnetic beads in microchannels. It is proposed that one of the most important approaches for separation efficiency enhancement is to improve the coordination of magnetic force field and fluid flow field. A T-shaped microchannel magnetophoretic separator was designed based on the angle. And then a two-dimensional dynamic model of magnetic beads moving in microchannels was established to study the separation efficiency of T-shaped microseparator by combined use of finite element method and Runge-Kutta method. The results show that the capture effi-ciency of T-shaped microseparator is much higher than that of the straight microseparator at the same conditions. For small magnetic beads at high fluid velocities,the designed T-shaped microseparator could still keep high separation efficiency whereas the conventional straight microseparator fails to separate the magnetic beads. Further analysis shows that the mechanism of separation efficiency enhancement lies in the synergy of magnetic force field and flow field,which directly leads to large deflected velocity of the magnetic beads from the main stream,and thus increasing the separation efficiency. It is anticipated that the results in this paper are theoretically helpful for the optimum design of highly efficient magnetophoretic separators.展开更多
Discontinuous deformation analysis (DDA) method is a newly developed discrete element method which employs the implicit time-integration scheme to solve the governing equations and the open-close iteration (OCI) m...Discontinuous deformation analysis (DDA) method is a newly developed discrete element method which employs the implicit time-integration scheme to solve the governing equations and the open-close iteration (OCI) method to deal with contact prob- lem, its computational efficiency is relatively low. However, spherical element based discontinuous deformation analysis (SDDA), which uses very simple contact type like point-to-point contact, has higher calculation speed. In the framework of SDDA, this paper presents a very simple contact calculation approach by removing the OCI scheme and by adopting the maximal displacement increment (MDI). Through some verification examples, it is proved that the proposed method is correct and effective, and a higher computational efficiency is obtained.展开更多
基金Project 2006HZ0002-2 supported by the Special Topic Fund of Key Science and Technology of Fujian Province
文摘The discrete element method(DEM) has been widely used to simulate microscopic interactions between particles.Screening is a deeply complicated process when considering the law of motion for the particles,themselves.In this paper,a numerical model for the study of a particle screening process using the DEM is presented.Special attention was paid to the modeling of a vibrating screen that allows particles to pass through,or to rebound,when approaching the screen surface.Inferences concerning screen length and vibrating frequency as they relate to screening efficiency were studied.The conclusions were:three-dimensional simulation of screening efficiency along the screen length follows an exponential distribution;when the sieve vibrates over a certain frequency range the screening efficiency is stable;and,higher vibration frequencies can improve the handling capacity of the screening machine.
基金Supported by National Key Laboratory of Bubble Physics and Natural Circulation (2005)
文摘Droplet turbulence effect on gas-water separator with corrugated plates is explored using the Eulerian-Lagrangian two-way coupled multiphase approach of FLUENT. It is concluded that the inertial force is dominant in separating large droplets, while droplet turbulence dispersion plays a decisive role in separating fine droplets. Good agreement exists between calculations and air-water experiments. The numerical method developed provides a rea-sonable description of the droplet trajectories and separating efficiency, and it can be applied to predicting the performance of gas-water separator with corrugated plates.
基金supported by the National Natural Science Foundation of China (Grant No.50925624)the National Basic Research Program of China ("973" Project) (Grant No.2012CB720404)the Science and Technology Commission of Shanghai Municipality (Grant No.11XD1403100)
文摘Magnetophoresis is one of the most important separation methods in biological and chemical engineering. In this paper,a novel impact parameter on separation efficiency,i.e.,the angle between the vectors of magnetic force and fluid velocity,was derived from the basic equation describing the motion of magnetic beads in microchannels. It is proposed that one of the most important approaches for separation efficiency enhancement is to improve the coordination of magnetic force field and fluid flow field. A T-shaped microchannel magnetophoretic separator was designed based on the angle. And then a two-dimensional dynamic model of magnetic beads moving in microchannels was established to study the separation efficiency of T-shaped microseparator by combined use of finite element method and Runge-Kutta method. The results show that the capture effi-ciency of T-shaped microseparator is much higher than that of the straight microseparator at the same conditions. For small magnetic beads at high fluid velocities,the designed T-shaped microseparator could still keep high separation efficiency whereas the conventional straight microseparator fails to separate the magnetic beads. Further analysis shows that the mechanism of separation efficiency enhancement lies in the synergy of magnetic force field and flow field,which directly leads to large deflected velocity of the magnetic beads from the main stream,and thus increasing the separation efficiency. It is anticipated that the results in this paper are theoretically helpful for the optimum design of highly efficient magnetophoretic separators.
基金supported by the National Basic Research Program of China("973" Project)(Grant Nos.2014CB046904&2014CB047101)the National Natural Science Foundation of China(Grant Nos.51479191&51509242)
文摘Discontinuous deformation analysis (DDA) method is a newly developed discrete element method which employs the implicit time-integration scheme to solve the governing equations and the open-close iteration (OCI) method to deal with contact prob- lem, its computational efficiency is relatively low. However, spherical element based discontinuous deformation analysis (SDDA), which uses very simple contact type like point-to-point contact, has higher calculation speed. In the framework of SDDA, this paper presents a very simple contact calculation approach by removing the OCI scheme and by adopting the maximal displacement increment (MDI). Through some verification examples, it is proved that the proposed method is correct and effective, and a higher computational efficiency is obtained.