The volume defects in pure pyrite and quartz from a classical Cu-Pb-Zn-Fe sulfide deposit were investigated.The results indicate that a large number of volume defects exist in natural pyrite and quartz.The volume defe...The volume defects in pure pyrite and quartz from a classical Cu-Pb-Zn-Fe sulfide deposit were investigated.The results indicate that a large number of volume defects exist in natural pyrite and quartz.The volume defects assume a variety of shapes,including long strips,oval shapes and irregular shapes,with sizes ranging from a few microns to dozens of microns.These volume defects are rich in metallogenic elements as a result of the capture of metallogenic and mineralizing fluid during the defect-forming process.The volume defects are fractured during the grinding process,and their chemical components are released into the solution,as confirmed by the abundant presence of various metal and non-metal components in the cleaning water and EDS results.Under the experimental conditions of 10 g pyrite or quartz with grinding fineness of d90=37 μm,which was cleaned in 40 m L of pure deionised water under an inert atmosphere,the total average concentrations of Cu,Pb,Zn,Fe,Ca,Mg and Cl-in the aqueous solution are 32.09×10^-7,16.51×10^-7,19.45×10^-7,516.52×10^-7,129.50×10^-7,35.30×10^-7 and 433.80×10^-7 mol/L,respectively,for pyrite and 19.20×10^-7,8.88×10^-7,8.31×10^-7,82.71×10^-7,16.21×10^-7,4.28×10^-7 and 731.26×10^-7 mol/L,respectively,for quartz.These values are significantly greater than those from the experimental non-oxidative dissolution of the pyrite or quartz,respectively.Therefore,the metallogenic fluid in volume defects of mineral crystal is concluded to represent the dominant contribution to the solution chemistry of sulfide flotation pulp.The present investigation will help to deeply understand the flotation theory of sulfide minerals.展开更多
H +_ATPase activity of tonoplast in roots of Hordeum vulgare L. cv. 'Tanyin 2' (salt_tolerant cultivar) increased when the roots were exposed to 50-200 mmol/L NaCl for 2 d, and decreased when NaCl concentrati...H +_ATPase activity of tonoplast in roots of Hordeum vulgare L. cv. 'Tanyin 2' (salt_tolerant cultivar) increased when the roots were exposed to 50-200 mmol/L NaCl for 2 d, and decreased when NaCl concentration was increased to 600 mmol/L. In 'Kepin 7' (salt_sensitive cultivar), tonoplast H +_ATPase activity in roots also increased at lower levels of NaCl (50-100 mmol/L), but decreased at higher levels of NaCl (200-600 mmol/L). Tonoplast fluidity in roots of 'Tanyin 2' decreased at 50-200 mmol/L NaCl, and increased significantly at 600 mmol/L NaCl. Under salt stress, the change of tonoplast fluidity was identical with that of the ratio of unsaturated fatty acids to saturated fatty acids in tonoplast lipid of barley roots. It is proposed that the increase of tonoplast fluidity due to increased degree of unsaturation of fatty acids is one of the reasons leading to the decrease of H +_ATPase activity under higher level of NaCl stress.展开更多
Dielectric properties of dithiol self-assemble monolayers （SAMs） under ac electric field were presented, Using a Hg-SAM/SAM-Ⅱg junction, the ac impedances of dithiol SAMs were measured using a sinusoidal perturbati...Dielectric properties of dithiol self-assemble monolayers （SAMs） under ac electric field were presented, Using a Hg-SAM/SAM-Ⅱg junction, the ac impedances of dithiol SAMs were measured using a sinusoidal perturbation of 30 mV （peak to-peak） with the frequency ranging from 1 Hz to 1 MHz at zero bias. The contributions from dithiol SAMs and solvent interlayers were separated due to their different behaviors at ac impedance. The peak position in the loss spectra （the plot; of tgδ vs. frequency） moves to low frequcney with the incrcase of chain length of dithiols. Using a correlation of peak position with the chain length, the active energies of 23-39 meV for dithiol SAMs of C6-C10 under an ac electric field were derived,展开更多
A stripping batch distillation column is preferred when the amount of the light component in the feed is small and the products are to be recovered at high purity. The operation modes of a batch stripping are believed...A stripping batch distillation column is preferred when the amount of the light component in the feed is small and the products are to be recovered at high purity. The operation modes of a batch stripping are believed to be the same as those of a rectifier. However, the control system of a stripper is different. In this paper, we explore three different control methods with Hysys (Hyprotech Ltd. 1997) for a batch stripper. The main difference is the control scheme for reboiler liquid level: (a) controlled by reflux flow; (b) controlled by reboiler heat duty; (c) controlled by bottom product flow. The main characteristics of operating a batch stripper with different control scheme are presented in this paper. Guidelines are provided for the startup of a batch stripper, the effects of somecontrol tuning parameters on the column performance are discussed.展开更多
The concept of graphlike manifolds was presented in [1] and the problem of counting the homeomorphic classes of graphlike manifolds has been studied in a series of articles, e.g., [1～8]. In this paper we suggest an a...The concept of graphlike manifolds was presented in [1] and the problem of counting the homeomorphic classes of graphlike manifolds has been studied in a series of articles, e.g., [1～8]. In this paper we suggest an approach based on the graph colouring, Abelian group and the combinatorial enumeration method.展开更多
基金Project(51464029)supported by the National Natural Science Foundation of ChinaProject(2014M562343)supported by the China Postdoctoral Science FoundationProject(KKSY201421110)supported the Scholar Development Project of Yunnan Province,China
文摘The volume defects in pure pyrite and quartz from a classical Cu-Pb-Zn-Fe sulfide deposit were investigated.The results indicate that a large number of volume defects exist in natural pyrite and quartz.The volume defects assume a variety of shapes,including long strips,oval shapes and irregular shapes,with sizes ranging from a few microns to dozens of microns.These volume defects are rich in metallogenic elements as a result of the capture of metallogenic and mineralizing fluid during the defect-forming process.The volume defects are fractured during the grinding process,and their chemical components are released into the solution,as confirmed by the abundant presence of various metal and non-metal components in the cleaning water and EDS results.Under the experimental conditions of 10 g pyrite or quartz with grinding fineness of d90=37 μm,which was cleaned in 40 m L of pure deionised water under an inert atmosphere,the total average concentrations of Cu,Pb,Zn,Fe,Ca,Mg and Cl-in the aqueous solution are 32.09×10^-7,16.51×10^-7,19.45×10^-7,516.52×10^-7,129.50×10^-7,35.30×10^-7 and 433.80×10^-7 mol/L,respectively,for pyrite and 19.20×10^-7,8.88×10^-7,8.31×10^-7,82.71×10^-7,16.21×10^-7,4.28×10^-7 and 731.26×10^-7 mol/L,respectively,for quartz.These values are significantly greater than those from the experimental non-oxidative dissolution of the pyrite or quartz,respectively.Therefore,the metallogenic fluid in volume defects of mineral crystal is concluded to represent the dominant contribution to the solution chemistry of sulfide flotation pulp.The present investigation will help to deeply understand the flotation theory of sulfide minerals.
文摘H +_ATPase activity of tonoplast in roots of Hordeum vulgare L. cv. 'Tanyin 2' (salt_tolerant cultivar) increased when the roots were exposed to 50-200 mmol/L NaCl for 2 d, and decreased when NaCl concentration was increased to 600 mmol/L. In 'Kepin 7' (salt_sensitive cultivar), tonoplast H +_ATPase activity in roots also increased at lower levels of NaCl (50-100 mmol/L), but decreased at higher levels of NaCl (200-600 mmol/L). Tonoplast fluidity in roots of 'Tanyin 2' decreased at 50-200 mmol/L NaCl, and increased significantly at 600 mmol/L NaCl. Under salt stress, the change of tonoplast fluidity was identical with that of the ratio of unsaturated fatty acids to saturated fatty acids in tonoplast lipid of barley roots. It is proposed that the increase of tonoplast fluidity due to increased degree of unsaturation of fatty acids is one of the reasons leading to the decrease of H +_ATPase activity under higher level of NaCl stress.
文摘Dielectric properties of dithiol self-assemble monolayers （SAMs） under ac electric field were presented, Using a Hg-SAM/SAM-Ⅱg junction, the ac impedances of dithiol SAMs were measured using a sinusoidal perturbation of 30 mV （peak to-peak） with the frequency ranging from 1 Hz to 1 MHz at zero bias. The contributions from dithiol SAMs and solvent interlayers were separated due to their different behaviors at ac impedance. The peak position in the loss spectra （the plot; of tgδ vs. frequency） moves to low frequcney with the incrcase of chain length of dithiols. Using a correlation of peak position with the chain length, the active energies of 23-39 meV for dithiol SAMs of C6-C10 under an ac electric field were derived,
基金Supported by CONICET (Consejo Nacional de Investigaciones Cientificas y Tecnicas, Argentina) (No. 778) and the Scientific Research Foundation of the State Education Ministry for Returned Overseas Chinese Scholar.
文摘A stripping batch distillation column is preferred when the amount of the light component in the feed is small and the products are to be recovered at high purity. The operation modes of a batch stripping are believed to be the same as those of a rectifier. However, the control system of a stripper is different. In this paper, we explore three different control methods with Hysys (Hyprotech Ltd. 1997) for a batch stripper. The main difference is the control scheme for reboiler liquid level: (a) controlled by reflux flow; (b) controlled by reboiler heat duty; (c) controlled by bottom product flow. The main characteristics of operating a batch stripper with different control scheme are presented in this paper. Guidelines are provided for the startup of a batch stripper, the effects of somecontrol tuning parameters on the column performance are discussed.
文摘The concept of graphlike manifolds was presented in [1] and the problem of counting the homeomorphic classes of graphlike manifolds has been studied in a series of articles, e.g., [1～8]. In this paper we suggest an approach based on the graph colouring, Abelian group and the combinatorial enumeration method.
