知识表达的分维度量理论

对定量分析,研究知识表达进行了尝试,从分维认识论角度出发,结合分维理论,使用信息论中的信息度量原理和方法,对知识表达的信息量、熵等一系列信息度量特征进行了研究,进而对知识表达的最大熵原理、熵增原理进行了探讨.从信息加工角度,提出了知识处理的加工信道的概念,对加工信道的类型、特性、结构进行了分析,指出了它们与人工智能中的推理模型的对应关系.最后,对几种典型的知识表达方式进行了定量化理论分析和评价.

球墨三维微观形貌的分维度量

以分维几何学为基础,本文建立了球墨二次电子象的分维布朗模型,提出了以图象处理系统为手段的球墨三维形貌的分维定量度量方法。这种方法能够真实地度量球墨三维形貌,具有对亮度线性变换的不变性,同时还能够很好地揭示球铁的处理工艺与其球墨三维形貌之间的关系。

Metrics analysis of tactile perceptual space based on improved NMDS for leather textures

To solve the fuzzy and unstable tactile similarity relationship between some sample points in the perception experiment,an improved non-metric multidimensional scaling(INMDS)is proposed in this paper.In view of the inconsistency of each sample s contribution,the maximum marginal decision when constructing the perception space to describe the tactile perception characteristics is also proposed.The corresponding constraints are set according to the degree of similarity,and controlling the relaxation variable factor is proposed to optimize the perception dimension and coordinate measurement.The effectiveness of the INMDS algorithm is verified by two perception experiments.The results show that compared with the metric multidimensional scaling(MDS)and non-metric multidimensional scaling(NMDS)algorithms,the perceptual space constructed by INMDS can more accurately reflect the difference relationship between different leather sample points perceived by people.Moreover,the relative position of sample points in the perceptual space is more consistent with subjective perception results.

Development of 2D Temperature and Concentration Measurement Method Using Tunable Diode Laser Absorption Spectroscopy

Exhaust gas temperature is an important factor in NOx, THC and PM emissions of engines. Especially 2D temperature and concentration distribution plays an important role for the engine efficiency. A thermocouple is intrinsically a point temperature measurement method and noncontact 2D temperature distribution cannot be attained by thermocouples. Recently, as a measurement technique with high sensitivity and high response, laser diagnostics has been developed and applied to the actual engine combustions. With these engineering developments, transient phenomena such as start-ups and load changes in engines have been gradually elucidated in various conditions. In this study, the theoretical and experimental research has been conducted in order to develop the noncontact and fast response 2D temperature and concentration distribution measurement method. The method is based on a Computed Tomography （CT） method using absorption spectra of water vapor at 1388 nm. It has been demonstrated that the method has been successfully applied to engine exhausts to measure 2D temperature distributions.

Sweet false stalk crusher

After finishing picking the banana, how to tackle banana pesudostem has long been a thorny problem. According to banana pesudostem＇s characteristics of more crassitude stem, high moisture content and heavy fiber density, this paper proposes a efficient, energy-saving and low-loss device for crushing banana pesudostems and returning field.

Stress analysis of single joint rock mass under triaxial compression

Based on the fundamental principle of rock mechanics, the stresses of single joint rock mass under three-dimensional compression were analyzed. The effect of the in-termediate principle stress on the strength of single joint rock mass were discussed in par-ticular. It is found that the strength of single joint rock are affected by the intermediate principal stress, which may be the main factor in some conditions.

Performance Analysis of Medium Access Control Protocol for IEEE 802.11g-over-Fiber Networks

This paper investigates the Medium Access Control(MAC)protocol performance in the IEEE 802.11g-over-fiber network for different payloads and fiber lengths using Direct Sequence Spread Spectrum-Orthogonal Frequency Division Multiplexing(DSSSOFDM)and Extended Rate PhysicalsOrthogonal Frequency Division Multiplexing(ERP-OFDM)physical layers using basic access mode,Request to Send/Clear to Send(RTS/CTS)and CTS-to-self mechanisms.The results show that IEEE 802.11g-over-fiber network employing the ERP-OFDM physical layer is much more efficient than that employing the DSSS-OFDM physical layer,with regards to both throughput and delay.For a given maximum throughput/minimum delay,the tradeoff among the access mechanism,the fiber length,and the payload size must be considered.Our quantified results give a selection basis for the operators to quickly select suitable IEEE 802.11g physical layers and the different access mechanisms,and accurately predict the data throughput and delay given the specific parameters.

Spatial Density Distributions and Correlations in a Quasi-one-Dimensional Polydisperse Granular Gas

By Monte Carlo simulations, the effect of the dispersion of particle size distribution on the spatial density distributions and correlations of a quasi one-dimensional polydisperse granular gas with fractal size distribution is investigated in the same inelasticity. The dispersive degree of the particle size distribution can be measured by a fractal dimension dr, and the smooth particles are constrained to move along a circle of length L, colliding inelastically with each other and thermalized by a viscosity heat bath. When the typical relaxation time τ of the driving Brownian process is longer than the mean collision time To, the system can reach a nonequilibrium steady state. The average energy of the system decays exponentially with time towards a stable asymptotic value, and the energy relaxation time τB to the steady state becomes shorter with increasing values of df. In the steady state, the spatial density distribution becomes more clusterized as df increases, which can be quantitatively characterized by statistical entropy of the system. Furthermore, the spatial correlation functions of density and velocities are found to be a power-law form for small separation distance of particles, and both of the correlations become stronger with the increase of df. Also, tile density clusterization is explained from the correlations.

Study on Blade Surface Flow around Wind Turbine by Using LDV Measurements

This paper has attempted to study a mechanism of three-dimensional flow around a horizontal axis wind turbine(HAWT) rotor blade. An experimental study of the flow phenomenon in the vicinity of the wind turbine blade is a challenging endeavor. In this research, the HAWT model with 2.4 m diameter was tested in the large wind tunnel. The flow around the rotating blade surface was measured simultaneously for three velocity components, and two probes were used for the synchronized measurement of three-dimensional flow components. The local velocity was detected for the single seeding particle measured in the point where three pairs of laser beams intersected. Blade sections of interest in this study are composed of radial positions r/R = 0.3, 0.5 and 0.7. Optimum and low tip speed ratio flow characteristics were also compared. The velocity flow vector, skin friction coefficient and bound circulation were calculated from LDV measurements, and the experimental research showed reasonably and clearly the experimental results.

Latitudinal and climatic distributions of 3D craniofacial features among Holocene populations

The geographical and climatic patterning in craniofacial morphology among recent hominids has been regarded as relatively reliable evidence of environmental adaptation and natural selection,which is largely attributed to thermoregulation.However,the relative influence of genetic and environmental factors on craniofacial features is unclear.Our study employed 3D laser scanning techniques to evaluate the association between geographical(latitude),climatic(annual temperature)factors,and 3D craniofacial measurements in 18 recent populations through bivariate correlation analysis.Significant correlations were found among braincase surface area,zygomatic bone surface area,cranial-facial index(facial surface area relative to braincase surface area)and local temperature,and a clear latitudinal gradient was also found in variation of braincase surface area.No significant correlations were found between zygomatic bone surface area,cranial-facial index and latitude.Our analysis supports the idea that the braincase functions as a radiator and is closely related to direct sunlight.We also suggest that absolute/relative craniofacial surface area varies consistently with predictions derived from Bergmann’s Rule.The mosaic craniofacial traits of American Indians may reflect retention of cold-derived,ancestral features,as well as a response to a slightly warmer climate.Because different craniofacial regions preserve environmental/genetic signatures differentially,caution is suggested when craniofacial anatomy is used for phylogenetic reconstruction and functional-morphological analysis.

Hawking Radiation of a d-Dimensional Black Hole with Quantum Correction

We study the absorption probability and Hawking radiation of the scalar field in a d-dimensional black hole with quantum correction arising from the polymer quantization. We find that the quantum length scale k （i.e., the bounce radius） modifies the standard results in greybody factors and Hawking radiation on the brahe and into the bulk. For the black hole with the larger mass M the effects of the parameter k in the four-dimensional black hole spacetime are entirely different from those in the high dimensional cases. When the mass of black hole M becomes very small, we also find that only the sign of the change rate of the greybody factors on the brahe with respect to the dimensional number depends sharply on the bounce radius k. These information can help us know more about the extra dimension and the black holes with quantum correction.

THE CAPACITY DENSITY AND THE HAUSDORFF DIMENSION OF FRACTAL SETS

This paper defines the upper capacity densities of the subsets of R￣n, gets uniform lower bound of the upper capacity densities for -almost all points of the Hausdorff s-sets or the analytic sets with Hausdorff dimension s in R￣n which improves the results of Wen Zhiying and Zhang Yiping's paper in [1].

Teichmller space of negatively curved metrics on complex hyperbolic manifolds is not contractible

We prove that for all n = 4k- 2 and k 2 there exists a closed smooth complex hyperbolic manifold M with real dimension n having non-trivial π1(T<0(M)). T<0(M) denotes the Teichm¨uller space of all negatively curved Riemannian metrics on M, which is the topological quotient of the space of all negatively curved metrics modulo the space of self-diffeomorphisms of M that are homotopic to the identity.

Blow-up of critical norms for the 3-D Navier-Stokes equations

Let u = （Uh,U3） be a smooth solution of the 3-D Navier-Stokes equations in R3 × [0, T）. It was proved that if u3 ∈ L^∞（0,T;Bp,q-1＋3/p（R3）） for 3 〈 p,q 〈 oe and uh ∈ L^∞（0, T;BMO-1（R3）） with uh（T） ∈ VMO-1（R3）, then u can be extended beyond T. This result generalizes the recent result proved by Gallagher et al. （2016）, which requires u ∈ L^∞（O,T;Bp,^-11＋3/P（R3））. Our proof is based on a new interior regularity criterion in terms of one velocity component, which is independent of interest.