The design of sleeve detach and reunion drive device of screw melt ex- truder equipment was optimized, based on the present installation of hygraulic drive device to achieve the mechanical opening and closing of the s...The design of sleeve detach and reunion drive device of screw melt ex- truder equipment was optimized, based on the present installation of hygraulic drive device to achieve the mechanical opening and closing of the sleeve, the dynamic model of the sleeve detach and reunion drive was theoretically measured, and it was verified that the device is simple to operate and convenient to maintain, thus it has great social values.展开更多
In the trust management scheme of the distributed cognitive radio networks, the absence of the central control devices cause many problems such as a lack of standardized control for trust computation, and the absence ...In the trust management scheme of the distributed cognitive radio networks, the absence of the central control devices cause many problems such as a lack of standardized control for trust computation, and the absence of the decision makers in trust evaluation and collaborative decision making. A trust management mechanism based on the jury system for distributed cognitive radio networks is proposed in this paper. The "jury user" is designed to collaboratively examine the reputation of the cognitive user in the networks and to perform data fusion and spectrum allocation for distributed cognitive radio networks. Simulation analysis results show that the proposed scheme can ensure accuracy and fairness in trust evaluation and improve effectiveness and flexibility of spectrum allocation.展开更多
This paper aims to provide a design about a kind of low-cost ＂sub-mother＂ UAV small formation by using the low-cost micro-UAV as the platform. Combined with the current international situation in the UAV formation r...This paper aims to provide a design about a kind of low-cost ＂sub-mother＂ UAV small formation by using the low-cost micro-UAV as the platform. Combined with the current international situation in the UAV formation research, the modeling is based on the distributed control method and the behavior-based strategy. In this paper, some research to a few key issues has been carried out.展开更多
This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area,2.5 cm2).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates...This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area,2.5 cm2).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates to etch flow channels without a gold-coating.Therefore,this investigation used MEMS technology for fabrication of a flow field plate and presents a novel fabrication procedure.Various operating parameters,such as fuel temperature and fuel stoichiometric flow rate,are tested to optimize micro PEMFC performance.A single micro PEMFC using MEMS technology reveals the ideal performance of the proposed fuel cell.The optimal power density approaches 232.75 mW·cm-1 when the fuel cell is operated at ambient condition with humidified,heated fuel.展开更多
This paper compares Ceramic Decal design and traditional printing design through computer; show the innovation advantages of computer Ceramic Decal design prominent, such as computer color advantage, computer design s...This paper compares Ceramic Decal design and traditional printing design through computer; show the innovation advantages of computer Ceramic Decal design prominent, such as computer color advantage, computer design software brings innovation advantage. The computer brings to the thinking innovation advantage and computer Ceramic Decal design than the traditional ceramic decal in the design process. Through the design advantage that computer has very important influence and significance of ceramic decal.展开更多
According to the China Statistical Yearbook divided eight consumption expenditure, I set food, clothing, housing and household equipment and services as residents basic living expenses, of China＇ s rural pension repl...According to the China Statistical Yearbook divided eight consumption expenditure, I set food, clothing, housing and household equipment and services as residents basic living expenses, of China＇ s rural pension replacement rate level of demand is calculated. The financial revenue scale autoregressive model predicted 2010-2020, the scale of fiscal revenue, with Pratt ＆ Whitney type total pension should be of basic pension and substitution rate level of demand for pension accounts for fiscal revenue proportion of the international experience of fiscal income of 5% were measured and evaluated. The current basic pension in the short term to improve the life of the rural elderly has an important role, but the long-term need to continue to increase, should optimize the structure of fiscal expenditure.展开更多
A spacecraft＇s separation parameters directly affect its flying trace. If the parameters exceed their limits, it will be difficult to adjust the flying attitude of the spacecraft, and the spacescraft may go off-track...A spacecraft＇s separation parameters directly affect its flying trace. If the parameters exceed their limits, it will be difficult to adjust the flying attitude of the spacecraft, and the spacescraft may go off-track or crash. In this paper, we present a composite optimization method, which combines angular velocities with external moments for separation parameters of large-eccentricity pico-satellites. By changing the positions of elastic launch devices, the method effectively controls the popping process under the condition of less change in the separation mechanism. Finally, the reasons for deviation of angular velocities and unreliable optimization results are presented and analyzed. This optimization method is proved through a ground test which offsets the gravity. Simulation and test results show that the optimization method can effectively optimize the separation parameters of large-eccentricity pico-satellites. The proposed method adapts particularly to the fixed and non-stable status elastic parameters, the distribution of all kinds of elastic devices, and large-eccentricity spacecrafts for which attitude corrections are difficult. It is gen- erally applicable and easy to operate in practical applications.展开更多
文摘The design of sleeve detach and reunion drive device of screw melt ex- truder equipment was optimized, based on the present installation of hygraulic drive device to achieve the mechanical opening and closing of the sleeve, the dynamic model of the sleeve detach and reunion drive was theoretically measured, and it was verified that the device is simple to operate and convenient to maintain, thus it has great social values.
基金supported by the National Natural Science Foundation of China under Grant No. 61172068
文摘In the trust management scheme of the distributed cognitive radio networks, the absence of the central control devices cause many problems such as a lack of standardized control for trust computation, and the absence of the decision makers in trust evaluation and collaborative decision making. A trust management mechanism based on the jury system for distributed cognitive radio networks is proposed in this paper. The "jury user" is designed to collaboratively examine the reputation of the cognitive user in the networks and to perform data fusion and spectrum allocation for distributed cognitive radio networks. Simulation analysis results show that the proposed scheme can ensure accuracy and fairness in trust evaluation and improve effectiveness and flexibility of spectrum allocation.
文摘This paper aims to provide a design about a kind of low-cost ＂sub-mother＂ UAV small formation by using the low-cost micro-UAV as the platform. Combined with the current international situation in the UAV formation research, the modeling is based on the distributed control method and the behavior-based strategy. In this paper, some research to a few key issues has been carried out.
基金Supported by the National Science Council (NSC 97-2221-E-009-067)
文摘This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area,2.5 cm2).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates to etch flow channels without a gold-coating.Therefore,this investigation used MEMS technology for fabrication of a flow field plate and presents a novel fabrication procedure.Various operating parameters,such as fuel temperature and fuel stoichiometric flow rate,are tested to optimize micro PEMFC performance.A single micro PEMFC using MEMS technology reveals the ideal performance of the proposed fuel cell.The optimal power density approaches 232.75 mW·cm-1 when the fuel cell is operated at ambient condition with humidified,heated fuel.
文摘This paper compares Ceramic Decal design and traditional printing design through computer; show the innovation advantages of computer Ceramic Decal design prominent, such as computer color advantage, computer design software brings innovation advantage. The computer brings to the thinking innovation advantage and computer Ceramic Decal design than the traditional ceramic decal in the design process. Through the design advantage that computer has very important influence and significance of ceramic decal.
文摘According to the China Statistical Yearbook divided eight consumption expenditure, I set food, clothing, housing and household equipment and services as residents basic living expenses, of China＇ s rural pension replacement rate level of demand is calculated. The financial revenue scale autoregressive model predicted 2010-2020, the scale of fiscal revenue, with Pratt ＆ Whitney type total pension should be of basic pension and substitution rate level of demand for pension accounts for fiscal revenue proportion of the international experience of fiscal income of 5% were measured and evaluated. The current basic pension in the short term to improve the life of the rural elderly has an important role, but the long-term need to continue to increase, should optimize the structure of fiscal expenditure.
基金Project supported by the National Natural Science Foundation of China(No.61525403)
文摘A spacecraft＇s separation parameters directly affect its flying trace. If the parameters exceed their limits, it will be difficult to adjust the flying attitude of the spacecraft, and the spacescraft may go off-track or crash. In this paper, we present a composite optimization method, which combines angular velocities with external moments for separation parameters of large-eccentricity pico-satellites. By changing the positions of elastic launch devices, the method effectively controls the popping process under the condition of less change in the separation mechanism. Finally, the reasons for deviation of angular velocities and unreliable optimization results are presented and analyzed. This optimization method is proved through a ground test which offsets the gravity. Simulation and test results show that the optimization method can effectively optimize the separation parameters of large-eccentricity pico-satellites. The proposed method adapts particularly to the fixed and non-stable status elastic parameters, the distribution of all kinds of elastic devices, and large-eccentricity spacecrafts for which attitude corrections are difficult. It is gen- erally applicable and easy to operate in practical applications.
