分步结晶法制取石油萘

分部结晶工艺制取焦油萘,具有设备效率高,节能效果明显,分离能力很强的优点。本文通过分部结晶法制取石油萘的实验,摸索制取石油萘的方法与工艺参数。

Microstructure evolution and mechanical properties of ZK60 magnesium alloy produced by SSTT and RAP route in semi-solid state

The microstructure evolution and mechanical properties of a ZK60 magnesium alloy produced by the semi-solid thermal transformation （SSTT） route and the recrystallization and partial melting （RAP） route were studied, respectively. The microstructure evolution during partial remelting was studied at different temperatures for different time. The tensile mechanical properties of thixoformed components by the two routes at room temperature were examined. The results show that coalescence is dominant in the SSTT alloy and Ostwald ripening is dominant in the RAP alloy. Compared with the SSTT route, the RAP route can produce finer semi-solid microstructure under the similar isothermal holding condition. The microstructure of the RAP alloy is much more spheroidized compared with the SSTT alloy. Thixoforming for the ZK60 magnesium alloy produced by the SSTT and RAP route results in successful filling of the die, and the thixoforming process improves the mechanical properties of ZK60 magnesium alloy. The RAP alloy shows significantly advantageous mechanical properties over that of the SSTT alloy.

Effect of partial recrystallization on microstructure and tensile properties of NiFeCoCrMn high-entropy alloy

To obtain a balance between strength and ductility in NiFeCoCrMn high-entropy alloy, the degree of dislocation strengthening was tuned via partial recrystallization during traditional thermomechanical processing(cold rolling and recrystallization). The tensile properties in each state were then examined. Significant improvements in uniform elongation and work hardening rate, with decrease in yield strength and ultimate tensile strength, are associated with increase in the recrystallized fraction, i.e., reductions in the degree of strain hardening. In particular, recrystallized fractions of 37% and 74% are obtained by annealing at 650 ℃ for 10 min and 15 min, respectively, which results in yield strengths of 1003 MPa and 742 MPa and uniform elongations of 4% and 24%, respectively. The strengthening is due to the unrecrystallized grains with a high density of dislocations, whereas the ductility benefits from the presence of recrystallized strain-free grains.

Origin of the Volcanic Rocks Erupted in the Eastern Manus Basin：Basaltic Andesite-Andesite-Dacite Associations

There has been much recent interest in the origin of intermediate lava and several hypotheses are: 1) direct melting of the mantle under water-saturated conditions, 2) partial melting of altered crust, 3) fractional crystallization of parent magma, and 4) magma mixing of mafic magmas with dacitic/rhyolitic magmas. Volcanic rocks series ranging from basaltic andesite to dacite(SiO_2 ranges from 53.8 to 63.0 wt.%) from the eastern Manus Basin were detected for major and trace element compositions to understand their origin. Low H_2O contents, positive correlations of La-SiO_2 and Yb-SiO_2, oxygen isotope data and the indistinct change of trace element concentrations in oscillatory zoning of plagioclase phenocrysts rule out the models in which silicic lava results from direct melting of hydrous mantle, partial melting of altered oceanic crust or gabbros, and magma mixing, respectively. Besides, the geochemical data of whole rock and melt inclusions indicate that fractional crystallization plays a dominant role in generating the intermediate lava with subduction features.

Microstructure and tensile properties of AM50A magnesium alloy prepared by recrystallisation and partial melting process

Prior to thixoextrusion, the microstructural evolution of semi-solid AM50A magnesium alloy prepared by the recrystallisation and partial remelting (RAP) route was investigated.The effect of compressive ratio on microstructure of semi-solid AM50A magnesium alloy was studied.Furthermore, tensile properties of thixoextruded components were determined.The results showed that the occurrence of recrystallised grains was closely associated with the location of the first liquid formed above the solidus.With prolonging holding time, deformed microstructure was penetrated, causing fragmentation, which resulted in the decrease of average grain size.Moreover, prolonging holding time was favorable for the improvement of the degree of spheroidization due to the increase in the amount of liquid.With the increase in compressive ratio, the size of solid grain decreased, the degree of spheroidization was improved during partial remelting, and the tensile properties of thixoextruded AM50A components were improved.The tensile properties for AM50A magnesium alloy thixoextruded from starting material produced by the RAP route were better than those of the same alloy produced by die-casting and thixomolding.

Kinetics for static recrystallization after hot working of 0.38C-0.99Cr-0.16Mo steel

The restoration mechanisms for static recrystallization of work-hardened austenite were investigated by using double-pass compression tests performed on medium-carbon steel containing chromium and molybdenum. The softening fraction was defined by 2% offset method. The results show that Avrami exponent of about 0.21 is insensitive to deformation temperature, indicating that the action of steel grade should be considered. The time of 50% recrystallization (t0.5) decreases noteworthily with the increase of deformation temperature. Apparent activation energy for static recrystallization of 195 kJ/mol, which is close to that of vanadium microalloyed steel, is obtained by calculating. The increasing trend of the driving force for recrystallization is opposite to that of the deformation temperature, which is attributed to the number of operative slip system increasing as temperature increasing.