Real and complex Schur forms have been receiving increasing attention from the fluid mechanics community recently,especially related to vortices and turbulence.Several decompositions of the velocity gradient tensor,su...Real and complex Schur forms have been receiving increasing attention from the fluid mechanics community recently,especially related to vortices and turbulence.Several decompositions of the velocity gradient tensor,such as the triple decomposition of motion(TDM)and normal-nilpotent decomposition(NND),have been proposed to analyze the local motions of fluid elements.However,due to the existence of different types and non-uniqueness of Schur forms,as well as various possible definitions of NNDs,confusion has spread widely and is harming the research.This work aims to clean up this confusion.To this end,the complex and real Schur forms are derived constructively from the very basics,with special consideration for their non-uniqueness.Conditions of uniqueness are proposed.After a general discussion of normality and nilpotency,a complex NND and several real NNDs as well as normal-nonnormal decompositions are constructed,with a brief comparison of complex and real decompositions.Based on that,several confusing points are clarified,such as the distinction between NND and TDM,and the intrinsic gap between complex and real NNDs.Besides,the author proposes to extend the real block Schur form and its corresponding NNDs for the complex eigenvalue case to the real eigenvalue case.But their justification is left to further investigations.展开更多
Matrix principal component analysis （MatPCA）, as an effective feature extraction method, can deal with the matrix pattern and the vector pattern. However, like PCA, MatPCA does not use the class information of sampl...Matrix principal component analysis （MatPCA）, as an effective feature extraction method, can deal with the matrix pattern and the vector pattern. However, like PCA, MatPCA does not use the class information of samples. As a result, the extracted features cannot provide enough useful information for distinguishing pat- tern from one another, and further resulting in degradation of classification performance. To fullly use class in- formation of samples, a novel method, called the fuzzy within-class MatPCA （F-WMatPCA）is proposed. F-WMatPCA utilizes the fuzzy K-nearest neighbor method（FKNN） to fuzzify the class membership degrees of a training sample and then performs fuzzy MatPCA within these patterns having the same class label. Due to more class information is used in feature extraction, F-WMatPCA can intuitively improve the classification perfor- mance. Experimental results in face databases and some benchmark datasets show that F-WMatPCA is effective and competitive than MatPCA. The experimental analysis on face image databases indicates that F-WMatPCA im- proves the recognition accuracy and is more stable and robust in performing classification than the existing method of fuzzy-based F-Fisherfaces.展开更多
A set of multi-component matrix Lie algebra is constructed. It follows that a type of new loop algebra AM-1 is presented. An isospectral problem is established. Integrable multi-component hierarchy is obtained by Tu p...A set of multi-component matrix Lie algebra is constructed. It follows that a type of new loop algebra AM-1 is presented. An isospectral problem is established. Integrable multi-component hierarchy is obtained by Tu pattern, which possesses tri-Hamiltonian structures. Furthermore, it can be reduced to the well-known AKNS hierarchy and BPT hierarchy. Therefore, the major result of this paper can be regarded as a unified expression integrable model of the AKNS hierarchy and the BPT hierarchy.展开更多
Aiming at the non-stationary feattwes of the roller bearing fault vibration signal, a roller bearing fault diagnosis methtxt based on improved Local Mean Decomposition （LMD） and Support Vector Machine （SVM） is pro...Aiming at the non-stationary feattwes of the roller bearing fault vibration signal, a roller bearing fault diagnosis methtxt based on improved Local Mean Decomposition （LMD） and Support Vector Machine （SVM） is proposed. In this paper, firstly, the wavelet analysis is introduced to the signal decomposition and reconstruction; secondly, the LMD method is used to decompose the recomtnion signal obtained by the wavelet analysis into a ntmaber of Product Ftmctions （PFs） that include main fault characteristics, thus, the initial feattwe vector matrixes could be formed automatically; Thirdly, by applying the Singular Valueition （SVD） techniques to the initial feature vector matrixes, the singular values of the matrixes can be obtained, which can be used as the fault feature vectors of the roller bearing and serve as the input vectors of the SVM classifier; Finally, the recognition results can be obtained from the SVM output. The results of analysis show that the propsed method can be applied to roller beating fault diagnosis effectively.展开更多
We investigate the realization of 2-qutrit logic gate in a bipartite 3-level system with qusi-Ising interaction. On the basis of Caftan decomposition of matrices, the unitary matrices of 2-qutrit are factorized into p...We investigate the realization of 2-qutrit logic gate in a bipartite 3-level system with qusi-Ising interaction. On the basis of Caftan decomposition of matrices, the unitary matrices of 2-qutrit are factorized into products of a series of realizable matrices. It is equivalent to exerting a certain control field on the system, and the control goal is usually gained by a sequence of control pulses. The general discussion on the realization of 2-qutrit logic gate is made first, and then the realization of the ternary SWAP gate and the ternary √SWAP gate are discussed specifically, and the sequences of control pulses and drift processes implementing these gates are given.展开更多
The scheme for probabilistic teleportation of an arbitrary three-particle state is proposed. By using single qubit gate and three two-qubit gates, efficient quantum logic networks for probabilistic teleportation of an...The scheme for probabilistic teleportation of an arbitrary three-particle state is proposed. By using single qubit gate and three two-qubit gates, efficient quantum logic networks for probabilistic teleportation of an arbitrary three-particle state are constructed.展开更多
A new calibration algorithm for multi-camera systems using 1D calibration objects is proposed. The algorithm inte- grates the rank-4 factorization with Zhang (2004)'s method. The intrinsic parameters as well as th...A new calibration algorithm for multi-camera systems using 1D calibration objects is proposed. The algorithm inte- grates the rank-4 factorization with Zhang (2004)'s method. The intrinsic parameters as well as the extrinsic parameters are re- covered by capturing with cameras the 1D object's rotations around a fixed point. The algorithm is based on factorization of the scaled measurement matrix, the projective depth of which is estimated in an analytical equation instead of a recursive form. For more than three points on a 1D object, the approach of our algorithm is to extend the scaled measurement matrix. The obtained parameters are finally refined through the maximum likelihood inference. Simulations and experiments with real images verify that the proposed technique achieves a good trade-off between the intrinsic and extrinsic camera parameters.展开更多
文摘Real and complex Schur forms have been receiving increasing attention from the fluid mechanics community recently,especially related to vortices and turbulence.Several decompositions of the velocity gradient tensor,such as the triple decomposition of motion(TDM)and normal-nilpotent decomposition(NND),have been proposed to analyze the local motions of fluid elements.However,due to the existence of different types and non-uniqueness of Schur forms,as well as various possible definitions of NNDs,confusion has spread widely and is harming the research.This work aims to clean up this confusion.To this end,the complex and real Schur forms are derived constructively from the very basics,with special consideration for their non-uniqueness.Conditions of uniqueness are proposed.After a general discussion of normality and nilpotency,a complex NND and several real NNDs as well as normal-nonnormal decompositions are constructed,with a brief comparison of complex and real decompositions.Based on that,several confusing points are clarified,such as the distinction between NND and TDM,and the intrinsic gap between complex and real NNDs.Besides,the author proposes to extend the real block Schur form and its corresponding NNDs for the complex eigenvalue case to the real eigenvalue case.But their justification is left to further investigations.
文摘Matrix principal component analysis （MatPCA）, as an effective feature extraction method, can deal with the matrix pattern and the vector pattern. However, like PCA, MatPCA does not use the class information of samples. As a result, the extracted features cannot provide enough useful information for distinguishing pat- tern from one another, and further resulting in degradation of classification performance. To fullly use class in- formation of samples, a novel method, called the fuzzy within-class MatPCA （F-WMatPCA）is proposed. F-WMatPCA utilizes the fuzzy K-nearest neighbor method（FKNN） to fuzzify the class membership degrees of a training sample and then performs fuzzy MatPCA within these patterns having the same class label. Due to more class information is used in feature extraction, F-WMatPCA can intuitively improve the classification perfor- mance. Experimental results in face databases and some benchmark datasets show that F-WMatPCA is effective and competitive than MatPCA. The experimental analysis on face image databases indicates that F-WMatPCA im- proves the recognition accuracy and is more stable and robust in performing classification than the existing method of fuzzy-based F-Fisherfaces.
文摘A set of multi-component matrix Lie algebra is constructed. It follows that a type of new loop algebra AM-1 is presented. An isospectral problem is established. Integrable multi-component hierarchy is obtained by Tu pattern, which possesses tri-Hamiltonian structures. Furthermore, it can be reduced to the well-known AKNS hierarchy and BPT hierarchy. Therefore, the major result of this paper can be regarded as a unified expression integrable model of the AKNS hierarchy and the BPT hierarchy.
基金supported by Chinese National Science Foundation Grant(No.50775068)China Postdoctoral Science Foundation funded project(No.20080430154)High-Tech Research and Development Program of China(No.2009AA04Z414)
文摘Aiming at the non-stationary feattwes of the roller bearing fault vibration signal, a roller bearing fault diagnosis methtxt based on improved Local Mean Decomposition （LMD） and Support Vector Machine （SVM） is proposed. In this paper, firstly, the wavelet analysis is introduced to the signal decomposition and reconstruction; secondly, the LMD method is used to decompose the recomtnion signal obtained by the wavelet analysis into a ntmaber of Product Ftmctions （PFs） that include main fault characteristics, thus, the initial feattwe vector matrixes could be formed automatically; Thirdly, by applying the Singular Valueition （SVD） techniques to the initial feature vector matrixes, the singular values of the matrixes can be obtained, which can be used as the fault feature vectors of the roller bearing and serve as the input vectors of the SVM classifier; Finally, the recognition results can be obtained from the SVM output. The results of analysis show that the propsed method can be applied to roller beating fault diagnosis effectively.
基金supported by the National Natural Science Foundation of China under Grant No. 60433050the Science Foundation of Xuzhou Normal University under Grant No. 06XLA05
文摘We investigate the realization of 2-qutrit logic gate in a bipartite 3-level system with qusi-Ising interaction. On the basis of Caftan decomposition of matrices, the unitary matrices of 2-qutrit are factorized into products of a series of realizable matrices. It is equivalent to exerting a certain control field on the system, and the control goal is usually gained by a sequence of control pulses. The general discussion on the realization of 2-qutrit logic gate is made first, and then the realization of the ternary SWAP gate and the ternary √SWAP gate are discussed specifically, and the sequences of control pulses and drift processes implementing these gates are given.
文摘The scheme for probabilistic teleportation of an arbitrary three-particle state is proposed. By using single qubit gate and three two-qubit gates, efficient quantum logic networks for probabilistic teleportation of an arbitrary three-particle state are constructed.
基金the National Natural Science Foundation of China (No. 60675017) the National Basic Research Program of China (No. 2006CB303103)
文摘A new calibration algorithm for multi-camera systems using 1D calibration objects is proposed. The algorithm inte- grates the rank-4 factorization with Zhang (2004)'s method. The intrinsic parameters as well as the extrinsic parameters are re- covered by capturing with cameras the 1D object's rotations around a fixed point. The algorithm is based on factorization of the scaled measurement matrix, the projective depth of which is estimated in an analytical equation instead of a recursive form. For more than three points on a 1D object, the approach of our algorithm is to extend the scaled measurement matrix. The obtained parameters are finally refined through the maximum likelihood inference. Simulations and experiments with real images verify that the proposed technique achieves a good trade-off between the intrinsic and extrinsic camera parameters.
