The residence-time distribution (RTD) and the compartment model were applied to characterizing the flow regions in red mud separation thickener’s feedwells. Combined with the experimental work, validated mathematic...The residence-time distribution (RTD) and the compartment model were applied to characterizing the flow regions in red mud separation thickener’s feedwells. Combined with the experimental work, validated mathematical model as well as three-dimensional computational fluid dynamics (CFD) model was established to analyze the flow regions of feedwells on an industrial scale. The concept of RTD, although a well-known method for the characterization of mixing behavior in conventional mixers and reactors, is still a novel measure for the characterization of mixing in feedwells. Numerical simulation results show that the inlet feed rate and the aspect ratio of feedwells are the most critical parameters which affect the RTD of feedwell. Further simulation experiments were then carried out. Under the optimal operation conditions, the volume fraction of dead zone can reduce by10.8% and an increasement of mixing flow volume fraction by 6.5% is also observed. There is an optimum feed inlet rate depending on the feedwell design. The CFD model in conjunction with the RTD analysis then can be used as an effective tool in the design, evaluation and optimization of thickener feedwell in the red mud separation.展开更多
The first internal transcribed spacer(ITS1) of nuclear ribosomal DNA of three wild rice species and two subspecies of cultivated rice, which are distributed in China, was amplified using PCR technique and sequenced wi...The first internal transcribed spacer(ITS1) of nuclear ribosomal DNA of three wild rice species and two subspecies of cultivated rice, which are distributed in China, was amplified using PCR technique and sequenced with automated fluorescent sequencing. The sequences of ITS1 ranged from 193 bp to 218 bp in size and G/C content varied from 69.3% to 72.7%. In pairwise comparisons among the five taxa, sequence site divergence ranged from 1.5% to 10.6%. Phylogenetic analysis of ITS1 sequences using Wagner parsimony generated a single well resolved tree, which revealed that Oryza rufipogon was much more closely related to cultivated rice species than to the other two wild species. Oryza granulata was less closely related to either cultivated rice species or the other two wild species, and might be a unique and isolated taxon in the genus Oryza. The phylogenetic relationships of the three wild rice species and two cultivated rice subspecies inferred from ITS1 sequences is highly concordant with those based on the molecular evidence from isozyme, chloroplast DNA (cpDNA), mitochondrial DNA(mtDNA) and nuclear DNA (nDNA) of the genus Oryza .展开更多
【英国《原子》1991年3月号第22页报道】SIR 设计采用了一种新的安全壳系统。由于 SIR 设计不可能发生大破口失冷事故(LOCA),因此其质量流和能量流被大大减少,这样就可以采用非能动弛压型安全壳。其反应堆压力容器分隔间通过大管道与8...【英国《原子》1991年3月号第22页报道】SIR 设计采用了一种新的安全壳系统。由于 SIR 设计不可能发生大破口失冷事故(LOCA),因此其质量流和能量流被大大减少,这样就可以采用非能动弛压型安全壳。其反应堆压力容器分隔间通过大管道与8个带肋片的钢容器相接。这8个钢容器均装有半容器水。展开更多
This paper introduces the key laboratory on bundle conductors for high voltage overhead lines built byElectric Power Construction Research Institute under the State Power Corporation of China. It consists of 4 sub-lab...This paper introduces the key laboratory on bundle conductors for high voltage overhead lines built byElectric Power Construction Research Institute under the State Power Corporation of China. It consists of 4 sub-laboratories, namely the Aeolian Vibration Lab, Spacer Vibration Lab, Conductor Fatigue Lab and Conductor CreepageLab. The paper introduces also laboratory’s facilities, functions and some experimental results.[展开更多
[Objective] The aim was to select suitable gene for Chlorella identification and to identify the oil-producing microalgae.[Method] Four candidate gene sequences,the nuclear genomic rDNA of the 18S rRNA gene,internal t...[Objective] The aim was to select suitable gene for Chlorella identification and to identify the oil-producing microalgae.[Method] Four candidate gene sequences,the nuclear genomic rDNA of the 18S rRNA gene,internal transcribed spacer(ITS),internal transcribed spacer Ⅱ(ITS Ⅱ)and the chloroplast rbcL gene,were selected for Chlorella molecular identification.Through these four candidate genes,the genetic variability and distinguish ability between intra-species and inter-species was analyzed to choose the right genes for identification of the high oil-content Chlorella.On this basis,application of these gene segments were classified and identified for five fresh-water isolated Chlorella,which oil-content is more than 30%.[Result] ITS gene was a suitable gene because of its high variation and short fragment length,meanwhile its genetic distance intra-species(0.439 6±0.135 9)was larger than inter-species(0.045 7±0.084 3).Its sequence length varied between different species whereas highly conserved in the same species.By the application of ITS sequences,respectively,five high oil-content stains were identified as one C.vulgaris,two strains of C.sorokiniana and two strains of algae Chlorella sp.[Conclusion] This study had provided reference for the establishment of identification gene pool of Chlorella.展开更多
In order to address the issues of traditional resampling algorithms involving computational accuracy and efficiency in rolling element bearing fault diagnosis, an equal division impulse-based(EDI-based) resampling a...In order to address the issues of traditional resampling algorithms involving computational accuracy and efficiency in rolling element bearing fault diagnosis, an equal division impulse-based(EDI-based) resampling algorithm is proposed. First, the time marks of every rising edge of the rotating speed pulse and the corresponding amplitudes of faulty bearing vibration signal are determined. Then, every adjacent the rotating pulse is divided equally, and the time marks in every adjacent rotating speed pulses and the corresponding amplitudes of vibration signal are obtained by the interpolation algorithm. Finally, all the time marks and the corresponding amplitudes of vibration signal are arranged and the time marks are transformed into the angle domain to obtain the resampling signal. Speed-up and speed-down faulty bearing signals are employed to verify the validity of the proposed method, and experimental results show that the proposed method is effective for diagnosing faulty bearings. Furthermore, the traditional order tracking techniques are applied to the experimental bearing signals, and the results show that the proposed method produces higher accurate outcomes in less computation time.展开更多
Randomness and fuzziness are among the attributes of the influential factors for stability assessment of pile foundation. According to these two characteristics, the triangular fuzzy number analysis approach was intro...Randomness and fuzziness are among the attributes of the influential factors for stability assessment of pile foundation. According to these two characteristics, the triangular fuzzy number analysis approach was introduced to determine the probability-distributed function of mechanical parameters. Then the functional function of reliability analysis was constructed based on the study of bearing mechanism of pile foundation, and the way to calculate interval values of the functional function was developed by using improved interval-truncation approach and operation rules of interval numbers. Afterwards, the non-probabilistic fuzzy reliability analysis method was applied to assessing the pile foundation, from which a method was presented for non- probabilistic fuzzy reliability analysis of pile foundation stability by interval theory. Finally, the probability distribution curve of non- probabilistic fuzzy reliability indexes of practical pile foundation was concluded. Its failure possibility is 0.91%, which shows that the pile foundation is stable and reliable.展开更多
A strategy for water and wastewater minimization is developed for continuous water utilization systems involving fixed flowrate(non-mass-transfer-based)operations,based on the fictitious operations that is introduced ...A strategy for water and wastewater minimization is developed for continuous water utilization systems involving fixed flowrate(non-mass-transfer-based)operations,based on the fictitious operations that is introduced to represent the water losing and/or generating operations and a modified concentration interval analysis(MCIA) technique.This strategy is a simple,nongraphical,and noniterative procedure and is suitable for the quick yields of targets and the identification of pinch point location.Moreover,on the basis of the target method,a heuristic-based approach is also presented to generate water utilization networks,which could be demonstrated to be optimum ones. The proposed approaches are illustrated with example problems.展开更多
Several fractionally spaced equalizers(FSE) which could be used in 60 GHz systems are presented in this paper. For 60 GHz systems, low-power equalization algorithms are favorable. We focus on FSE in both time domain(T...Several fractionally spaced equalizers(FSE) which could be used in 60 GHz systems are presented in this paper. For 60 GHz systems, low-power equalization algorithms are favorable. We focus on FSE in both time domain(TD) and frequency domain(FD) in order to meet different complexity requirements of 60 GHz systems. Compared with symbol spaced equalizer(SSE), FSE can relax the requirement of sampling synchronization hardware significantly. Extensive simulation results show that our equalization algorithms not only eliminate ISI efficiently, but are also robust to timing synchronization errors.展开更多
The hydraulic system plays an important role in supplying power and its transition to other working parts of a coal shearer machine. In this paper, the reliability of the hydraulic system of a drum shearer was analyze...The hydraulic system plays an important role in supplying power and its transition to other working parts of a coal shearer machine. In this paper, the reliability of the hydraulic system of a drum shearer was analyzed. A case study was done in the Tabas Coal Mine in Iran for failure data collection. The results of the statistical analysis show that the time between failures (TBF) data of this system followed the 3-parameters Weibull distribution. There is about a 54% chance that the hydraulic system of the drum shearer will not fail for the first 50 h of operation. The developed model shows that the reliability of the hydraulic system reduces to a zero value after approximately 1 650 hours of operation. The failure rate of this system decreases when time increases. Therefore, corrective maintenance (run-to-t^ailure) was selected as the best maintenance strategy for it.展开更多
With the idea of maximum entropy function and penalty function methods, we transform the quadratic programming problem into an unconstrained differentiable optimization problem, discuss the interval extension of the m...With the idea of maximum entropy function and penalty function methods, we transform the quadratic programming problem into an unconstrained differentiable optimization problem, discuss the interval extension of the maximum entropy function, provide the region deletion test rules and design an interval maximum entropy algorithm for quadratic programming problem. The convergence of the method is proved and numerical results are presented. Both theoretical and numerical results show that the method is reliable and efficient.展开更多
To provide basis for the reliability improvement design of CNC system, the failure data of a type of CNC system in one year are collected under field conditions in workshops. The distribution model parameters of time ...To provide basis for the reliability improvement design of CNC system, the failure data of a type of CNC system in one year are collected under field conditions in workshops. The distribution model parameters of time between failures are estimated by least square method and hypothesis testing is done by d-test method. It is proved that the time between failures of the CNC system follows Weibull distribution and the system has entered into the wear-out failure period. The failure positions and failure causes are analyzed further to indicate the weak subsystems of the CNC system. It can be found that servo unit, electrical system, detecting unit and power supply are principal failure positions and the main failure cause is breakage of components. The corresponding improvement measures are put forward. The paper provides a reference to reliability design and analysis of CNC system for the manufacturer and has great guidance to using and maintaining CNC system for the user.展开更多
基金Project (50876116) supported by the National Natural Science Foundation of China
文摘The residence-time distribution (RTD) and the compartment model were applied to characterizing the flow regions in red mud separation thickener’s feedwells. Combined with the experimental work, validated mathematical model as well as three-dimensional computational fluid dynamics (CFD) model was established to analyze the flow regions of feedwells on an industrial scale. The concept of RTD, although a well-known method for the characterization of mixing behavior in conventional mixers and reactors, is still a novel measure for the characterization of mixing in feedwells. Numerical simulation results show that the inlet feed rate and the aspect ratio of feedwells are the most critical parameters which affect the RTD of feedwell. Further simulation experiments were then carried out. Under the optimal operation conditions, the volume fraction of dead zone can reduce by10.8% and an increasement of mixing flow volume fraction by 6.5% is also observed. There is an optimum feed inlet rate depending on the feedwell design. The CFD model in conjunction with the RTD analysis then can be used as an effective tool in the design, evaluation and optimization of thickener feedwell in the red mud separation.
基金The project supported by the Grant from Presidentof Chinese Academy of Sciences
文摘The first internal transcribed spacer(ITS1) of nuclear ribosomal DNA of three wild rice species and two subspecies of cultivated rice, which are distributed in China, was amplified using PCR technique and sequenced with automated fluorescent sequencing. The sequences of ITS1 ranged from 193 bp to 218 bp in size and G/C content varied from 69.3% to 72.7%. In pairwise comparisons among the five taxa, sequence site divergence ranged from 1.5% to 10.6%. Phylogenetic analysis of ITS1 sequences using Wagner parsimony generated a single well resolved tree, which revealed that Oryza rufipogon was much more closely related to cultivated rice species than to the other two wild species. Oryza granulata was less closely related to either cultivated rice species or the other two wild species, and might be a unique and isolated taxon in the genus Oryza. The phylogenetic relationships of the three wild rice species and two cultivated rice subspecies inferred from ITS1 sequences is highly concordant with those based on the molecular evidence from isozyme, chloroplast DNA (cpDNA), mitochondrial DNA(mtDNA) and nuclear DNA (nDNA) of the genus Oryza .
文摘This paper introduces the key laboratory on bundle conductors for high voltage overhead lines built byElectric Power Construction Research Institute under the State Power Corporation of China. It consists of 4 sub-laboratories, namely the Aeolian Vibration Lab, Spacer Vibration Lab, Conductor Fatigue Lab and Conductor CreepageLab. The paper introduces also laboratory’s facilities, functions and some experimental results.[
基金Supported by Key Project of Knowledge Innovation Project of Chinese Academy of Sciences(KGCX2-YW-374-3)Scientific and Technological Project of Shandong Province(2008GG20007002)~~
文摘[Objective] The aim was to select suitable gene for Chlorella identification and to identify the oil-producing microalgae.[Method] Four candidate gene sequences,the nuclear genomic rDNA of the 18S rRNA gene,internal transcribed spacer(ITS),internal transcribed spacer Ⅱ(ITS Ⅱ)and the chloroplast rbcL gene,were selected for Chlorella molecular identification.Through these four candidate genes,the genetic variability and distinguish ability between intra-species and inter-species was analyzed to choose the right genes for identification of the high oil-content Chlorella.On this basis,application of these gene segments were classified and identified for five fresh-water isolated Chlorella,which oil-content is more than 30%.[Result] ITS gene was a suitable gene because of its high variation and short fragment length,meanwhile its genetic distance intra-species(0.439 6±0.135 9)was larger than inter-species(0.045 7±0.084 3).Its sequence length varied between different species whereas highly conserved in the same species.By the application of ITS sequences,respectively,five high oil-content stains were identified as one C.vulgaris,two strains of C.sorokiniana and two strains of algae Chlorella sp.[Conclusion] This study had provided reference for the establishment of identification gene pool of Chlorella.
基金Fundamental Research Funds for the Central Universities(No.2016JBM051)
文摘In order to address the issues of traditional resampling algorithms involving computational accuracy and efficiency in rolling element bearing fault diagnosis, an equal division impulse-based(EDI-based) resampling algorithm is proposed. First, the time marks of every rising edge of the rotating speed pulse and the corresponding amplitudes of faulty bearing vibration signal are determined. Then, every adjacent the rotating pulse is divided equally, and the time marks in every adjacent rotating speed pulses and the corresponding amplitudes of vibration signal are obtained by the interpolation algorithm. Finally, all the time marks and the corresponding amplitudes of vibration signal are arranged and the time marks are transformed into the angle domain to obtain the resampling signal. Speed-up and speed-down faulty bearing signals are employed to verify the validity of the proposed method, and experimental results show that the proposed method is effective for diagnosing faulty bearings. Furthermore, the traditional order tracking techniques are applied to the experimental bearing signals, and the results show that the proposed method produces higher accurate outcomes in less computation time.
基金Project(50378036) supported by the National Natural Science Foundation of ChinaProject(03JJY5024) supported by the Natural Science Foundation of Hunan Province, China
文摘Randomness and fuzziness are among the attributes of the influential factors for stability assessment of pile foundation. According to these two characteristics, the triangular fuzzy number analysis approach was introduced to determine the probability-distributed function of mechanical parameters. Then the functional function of reliability analysis was constructed based on the study of bearing mechanism of pile foundation, and the way to calculate interval values of the functional function was developed by using improved interval-truncation approach and operation rules of interval numbers. Afterwards, the non-probabilistic fuzzy reliability analysis method was applied to assessing the pile foundation, from which a method was presented for non- probabilistic fuzzy reliability analysis of pile foundation stability by interval theory. Finally, the probability distribution curve of non- probabilistic fuzzy reliability indexes of practical pile foundation was concluded. Its failure possibility is 0.91%, which shows that the pile foundation is stable and reliable.
文摘A strategy for water and wastewater minimization is developed for continuous water utilization systems involving fixed flowrate(non-mass-transfer-based)operations,based on the fictitious operations that is introduced to represent the water losing and/or generating operations and a modified concentration interval analysis(MCIA) technique.This strategy is a simple,nongraphical,and noniterative procedure and is suitable for the quick yields of targets and the identification of pinch point location.Moreover,on the basis of the target method,a heuristic-based approach is also presented to generate water utilization networks,which could be demonstrated to be optimum ones. The proposed approaches are illustrated with example problems.
基金supported in part by the National High Technology Research and Development Program of China(863 Program)(No.2011AA010201)National Science and Technology Major Project(No.2013ZX03005010)+1 种基金the National Natural Science Foundation of China(NSFC)(No.61371103 and No.60902025)Key Science and Technology Program of Sichuan Province of China(No.2012FZ0119 and No.2012FZ0029)
文摘Several fractionally spaced equalizers(FSE) which could be used in 60 GHz systems are presented in this paper. For 60 GHz systems, low-power equalization algorithms are favorable. We focus on FSE in both time domain(TD) and frequency domain(FD) in order to meet different complexity requirements of 60 GHz systems. Compared with symbol spaced equalizer(SSE), FSE can relax the requirement of sampling synchronization hardware significantly. Extensive simulation results show that our equalization algorithms not only eliminate ISI efficiently, but are also robust to timing synchronization errors.
文摘The hydraulic system plays an important role in supplying power and its transition to other working parts of a coal shearer machine. In this paper, the reliability of the hydraulic system of a drum shearer was analyzed. A case study was done in the Tabas Coal Mine in Iran for failure data collection. The results of the statistical analysis show that the time between failures (TBF) data of this system followed the 3-parameters Weibull distribution. There is about a 54% chance that the hydraulic system of the drum shearer will not fail for the first 50 h of operation. The developed model shows that the reliability of the hydraulic system reduces to a zero value after approximately 1 650 hours of operation. The failure rate of this system decreases when time increases. Therefore, corrective maintenance (run-to-t^ailure) was selected as the best maintenance strategy for it.
基金Supported by Science and Technology Foundation of China University of Mining & Technology
文摘With the idea of maximum entropy function and penalty function methods, we transform the quadratic programming problem into an unconstrained differentiable optimization problem, discuss the interval extension of the maximum entropy function, provide the region deletion test rules and design an interval maximum entropy algorithm for quadratic programming problem. The convergence of the method is proved and numerical results are presented. Both theoretical and numerical results show that the method is reliable and efficient.
基金the National High Technology Research and Development Program of China(Grant No.2002AA424058)the 10th Five-year National S&T Program of China(Grant No.2001BA203B13 -02).
文摘To provide basis for the reliability improvement design of CNC system, the failure data of a type of CNC system in one year are collected under field conditions in workshops. The distribution model parameters of time between failures are estimated by least square method and hypothesis testing is done by d-test method. It is proved that the time between failures of the CNC system follows Weibull distribution and the system has entered into the wear-out failure period. The failure positions and failure causes are analyzed further to indicate the weak subsystems of the CNC system. It can be found that servo unit, electrical system, detecting unit and power supply are principal failure positions and the main failure cause is breakage of components. The corresponding improvement measures are put forward. The paper provides a reference to reliability design and analysis of CNC system for the manufacturer and has great guidance to using and maintaining CNC system for the user.