An Experimental Study on Slotting of Inconel 718 Thin Sheet

Many difficult-to-cut materials such as Ni-base super alloy, titanium alloy, and austenite stainless steel which are used extensively in aerospace generally have high strength-to-weight ratios, high corrosion resistance, high strength retention ability at elevated temperatures, and low thermal conductivity. These characteristics can result in uneven tool wear and chatter vibration. Therefore, determining the appropriate end-milling conditions is more difficult for difficult-to-cut materials than for other materials. There has been much research on the high-speed milling of difficult-to-cut materials, and effective end-milling conditions, end-mill tool shapes, and processing methods have been reported. In addition, irregular pitch and lead end-mills with different helix angles have been developed by tool maker＇s to reduce chatter vibration, making it easier to perform high-speed milling. However, there have been few reports of slotting information useful for determining appropriate end-milling conditions and processing methods for Ni-base super alloy. The aim of this study is to derive end-milling condition with high efficiency grooving process for Ni-base super alloy （Inconel 718） sheet. Effects of cutting parameters were examined from the view point of cutting resistance, ＂tool tip maximum temperature and tool flank wear width. As a result from experiments, if the grooving process condition of axial depth of cut is smaller than other conditions on the same material removable rate value, it has been found that it is possible to reduce the tool tip maximum temperature and prolong the tool life.

Development of an ultrahard nanotwinned cBN micro tool for cutting hardened steel

Binderless nanotwinned cubic boron nitride(nt-cBN) synthesized from onion-structured BN precursors under high pressure and high temperature shows a very fine microstructure consisting of densely lamellar nanotwins(average thickness of 4 nm) within nanograins. The unique nanotwinned microstructure offers high hardness, wear resistance, fracture toughness, and thermal stability which are essential for advanced cBN tool materials. Thus, a circular micro tool of nt-cBN was fabricated using femtosecond laser contour machining followed by focused ion beam precision milling. Thereafter turning tests were performed on hardened steel using the studied micro tool. To evaluate the cutting performance, the machined surface quality and subsurface damage of the hardened steel were characterized. The wear mechanism of the nt-cBN micro tool was also investigated. It is found that the fabricated nt-cBN micro tool can generate high quality surface with surface roughness less than 7 nm and nanograin subsurface of about 500 nm deep. In addition, abrasive wear is found to be the dominant wear mechanism of the nt-cBN micro tool in turning hardened steel. These results indicate that nt-cBN has outstanding potential for ultra-precision cutting hardened steel.