The hot workability of 7085 aluminum alloys with different initial microstructures （as-homogenized and as-solution treated） was studied by isothermal compression tests at the deformation temperature ranging from 300...The hot workability of 7085 aluminum alloys with different initial microstructures （as-homogenized and as-solution treated） was studied by isothermal compression tests at the deformation temperature ranging from 300 to 450 ℃ and the strain rate ranging from 0.0001 to 1 s 1. The strain rate sensitivity of the alloy was evaluated and used for establishing the power dissipation maps and instability maps on the basis of the flow stress data. The results show that the efficiency of power dissipation for the as-homogenized alloy is lower than that of the as-solution treated alloy. The deformation parameters of the dynamic recrystallization for the as-homogenized and as-solution treated alloy occur at 400 ℃, 0.01 s i and 450 ℃, 0.001 s-1, respectively. The flow instability region of the as-homogenized alloy is narrower than that of the as-solution treated alloy. These differences of the alloys with two different initial microstructures on the processing maps are mainly related to the dynamic precipitation characteristics.展开更多
In order to describe and predict the kinetic process of discontinuous dynamic recrystallization （DDRX） during hot workingfor metals with low to medium stacking fault energies quantitatively, a new physically-based m...In order to describe and predict the kinetic process of discontinuous dynamic recrystallization （DDRX） during hot workingfor metals with low to medium stacking fault energies quantitatively, a new physically-based model was proposed by considering thecharacteristics of grain size distribution, capillary effect of initial grain boundaries （GBs） and continuous consumption of GBs. UsingIncoloy 028 alloy as a model system, experiments aiming to provide kinetic data （e.g., the size and volume fraction of recrystallizedgrain） and the associated microstructure were performed. Good agreement is obtained between model predictions and experimentalresults, regarding flow stress, recrystallized fraction and grain size evolution. On this basis, a thermo-kinetic relationship upon thegrowth of recrystallized grain was elucidated, i.e., with increasing thermodynamic driving force, the activation energy barrierdecreases.展开更多
Effects of heat treatment processing on the microstructure and mechanical properties of Ti-6Al-4V-10Nb alloy were investigated. The microstructures were investigated by SEM, TEM and XRD, and the mechanical properties ...Effects of heat treatment processing on the microstructure and mechanical properties of Ti-6Al-4V-10Nb alloy were investigated. The microstructures were investigated by SEM, TEM and XRD, and the mechanical properties were evaluated by tensile tests at room and elevated temperatures. The results indicate that the lath-like and globular primary α phase, secondary α phase and β phase are obtained after forging and heat treatment processing. The size of secondary α phase is much smaller than that of primary α phase. After heat treatment, the volume fraction of primary α phase is decreased, and that of secondary α phase is increased. With the increase of solution temperature, the volume fraction of primary α phase is gradually decreased, and that of secondary α phase is obviously increased. The yield strength and tensile strength of Ti-6Al-4V-10Nb alloy are significantly enhanced with the solution temperature increasing.展开更多
In the present work, a novel heterogeneous photo-Fenton catalyst was prepared by iron and cerium pillared bentonite. The catalyst Fe-Ce/bentonite was characterized by X-ray diffraction （XRD）, X-ray fluorescence （XR...In the present work, a novel heterogeneous photo-Fenton catalyst was prepared by iron and cerium pillared bentonite. The catalyst Fe-Ce/bentonite was characterized by X-ray diffraction （XRD）, X-ray fluorescence （XRF）, Brunauer-Emmett-Teller （BET） and scanning electron microscopy （SEM） methods. It is found that Fe and Ce intercalate into the silicate layers of bentonite successfully. Tetracycline was removed by heterogeneous photo-Fenton reaction using the catalyst in this work. The effects of different reaction systems, hydrogen peroxide concentration, initial pH, catalyst dosage, UV power and introduction of different anions on degradation were investigated in details. The stability of catalyst was investigated through recycling experiment. The results show that removal rate of tetracycline is 98.13% under the conditions of 15 mmol/L H202, 0.50 g/L catalyst dosage, initial pH 3.0, 11 W UV lamp power and 60 min reaction time. However, the removal rate decreases after adding some anions. The hydroxyl radical plays an important role in heterogeneous photo-assisted Fenton degradation of tetracycline. The catalyst is very stable and can be recycled many times.展开更多
For linear partial differential equation 〔 2t 2-a 2P( x)〕 m u=f(x,t), where m1,X∈R n,t∈R 1, the author gives the analytic solution of the initial value problem using the operators sh(tP( x) 1/2 )...For linear partial differential equation 〔 2t 2-a 2P( x)〕 m u=f(x,t), where m1,X∈R n,t∈R 1, the author gives the analytic solution of the initial value problem using the operators sh(tP( x) 1/2 )P( x) 1/2 . By representing the operators with integrals, explicit solutions are obtained with an integral form of a given function.展开更多
A comprehensive study on the microstructural evolution of a new type Al-Zn-Mg-Cu-Er-Zr alloy duringhomogenization was conducted by optical microscope,scanning electron microscope,transmission electron microscopy and X...A comprehensive study on the microstructural evolution of a new type Al-Zn-Mg-Cu-Er-Zr alloy duringhomogenization was conducted by optical microscope,scanning electron microscope,transmission electron microscopy and X-raydiffraction analysis.The results show that serious segregation exists in as-cast alloy,and the primary phases are T(AlZnMgCu),S(Al2CuMg)and Al8Cu4Er,which preferentially locate in the grain boundary regions.The soluble T(AlZnMgCu)and S(Al2CuMg)phases dissolve into the matrix gradually during single-stage homogenized at465°C with prolonging holding time,but the residualAl8Cu4Er phase cannot dissolve completely.Compared with the single-stage homogenization,both a finer particle size and a highervolume fraction of L12-structured Al3(Er,Zr)dispersoids can be obtained in the two-stage homogenization process.A suitablehomogenization scheme for the present alloy is(400°C,10h)+(465°C,24h),which is consistent with the results of homogenizationkinetic analysis.展开更多
Chalcopyrite oxidation rates were examined under various conditions in the presence of Leptospirillum ferriphilum,in which the effects of different pulp content,inoculation amount,external addition of Fe3+ and initial...Chalcopyrite oxidation rates were examined under various conditions in the presence of Leptospirillum ferriphilum,in which the effects of different pulp content,inoculation amount,external addition of Fe3+ and initial pH value were studied.The bioleaching residues were investigated by X-ray diffractograms(XRD),scanning electron microscopy(SEM) and energy dispersion spectrum(EDS) analysis.The results show that low pulp concentration increases the leaching rate of copper,and external addition of Fe3+ is also beneficial to leaching chalcopyrite.The changes of inoculation amount and initial pH from 1.6 to 2.5 have a little effect on the final leaching rate.The results also imply that Fe3+ ions are important for bioleaching of chalcopyrite.At the end of bioleaching,jarosite and sulfur are observed on the surface of chalcopyrite residues by using XRD,SEM and EDS.With the passivation layer formed by jarosite and sulfur,the continuous copper extraction is effectively blocked.展开更多
基金Projects(2010CB731701,2012CB619502) supported by the National Basic Research Program of ChinaProject(CX2012B043) supported by Hunan Provincial Innovation Foundation for Postgraduate,ChinaProject(51021063) supported by Creative Research Group of National Natural Science Foundation of China
文摘The hot workability of 7085 aluminum alloys with different initial microstructures （as-homogenized and as-solution treated） was studied by isothermal compression tests at the deformation temperature ranging from 300 to 450 ℃ and the strain rate ranging from 0.0001 to 1 s 1. The strain rate sensitivity of the alloy was evaluated and used for establishing the power dissipation maps and instability maps on the basis of the flow stress data. The results show that the efficiency of power dissipation for the as-homogenized alloy is lower than that of the as-solution treated alloy. The deformation parameters of the dynamic recrystallization for the as-homogenized and as-solution treated alloy occur at 400 ℃, 0.01 s i and 450 ℃, 0.001 s-1, respectively. The flow instability region of the as-homogenized alloy is narrower than that of the as-solution treated alloy. These differences of the alloys with two different initial microstructures on the processing maps are mainly related to the dynamic precipitation characteristics.
基金Project(51431008)supported by the National Natural Science Foundation of ChinaProjects(2017YFB0703001,2017YFB0305100)supported by the National Key Research and Development Program of China
文摘In order to describe and predict the kinetic process of discontinuous dynamic recrystallization （DDRX） during hot workingfor metals with low to medium stacking fault energies quantitatively, a new physically-based model was proposed by considering thecharacteristics of grain size distribution, capillary effect of initial grain boundaries （GBs） and continuous consumption of GBs. UsingIncoloy 028 alloy as a model system, experiments aiming to provide kinetic data （e.g., the size and volume fraction of recrystallizedgrain） and the associated microstructure were performed. Good agreement is obtained between model predictions and experimentalresults, regarding flow stress, recrystallized fraction and grain size evolution. On this basis, a thermo-kinetic relationship upon thegrowth of recrystallized grain was elucidated, i.e., with increasing thermodynamic driving force, the activation energy barrierdecreases.
基金Projects(2015GB107003,2015GB119001)supported by the International Thermonuclear Experimental Reactor(ITER)Program,ChinaProjects(51474155,11672200,51674175)supported by the National Natural Science Foundation of China
文摘Effects of heat treatment processing on the microstructure and mechanical properties of Ti-6Al-4V-10Nb alloy were investigated. The microstructures were investigated by SEM, TEM and XRD, and the mechanical properties were evaluated by tensile tests at room and elevated temperatures. The results indicate that the lath-like and globular primary α phase, secondary α phase and β phase are obtained after forging and heat treatment processing. The size of secondary α phase is much smaller than that of primary α phase. After heat treatment, the volume fraction of primary α phase is decreased, and that of secondary α phase is increased. With the increase of solution temperature, the volume fraction of primary α phase is gradually decreased, and that of secondary α phase is obviously increased. The yield strength and tensile strength of Ti-6Al-4V-10Nb alloy are significantly enhanced with the solution temperature increasing.
基金Project(51004053)supported by National Natural Science Foundation of ChinaProject(2009J01033)supported by Natural Science Foundation of Fujian Province,China+2 种基金Project(3502Z20116008)supported by the Science and Technology Research Project of Xiamen City,ChinaProject(JA11146)supported by Program for Fostering Distinguished Young Scholars in University of Fujian Province,ChinaProject(2011B003)supported by the Foundation for Young Professors of Jimei University,China
文摘In the present work, a novel heterogeneous photo-Fenton catalyst was prepared by iron and cerium pillared bentonite. The catalyst Fe-Ce/bentonite was characterized by X-ray diffraction （XRD）, X-ray fluorescence （XRF）, Brunauer-Emmett-Teller （BET） and scanning electron microscopy （SEM） methods. It is found that Fe and Ce intercalate into the silicate layers of bentonite successfully. Tetracycline was removed by heterogeneous photo-Fenton reaction using the catalyst in this work. The effects of different reaction systems, hydrogen peroxide concentration, initial pH, catalyst dosage, UV power and introduction of different anions on degradation were investigated in details. The stability of catalyst was investigated through recycling experiment. The results show that removal rate of tetracycline is 98.13% under the conditions of 15 mmol/L H202, 0.50 g/L catalyst dosage, initial pH 3.0, 11 W UV lamp power and 60 min reaction time. However, the removal rate decreases after adding some anions. The hydroxyl radical plays an important role in heterogeneous photo-assisted Fenton degradation of tetracycline. The catalyst is very stable and can be recycled many times.
文摘For linear partial differential equation 〔 2t 2-a 2P( x)〕 m u=f(x,t), where m1,X∈R n,t∈R 1, the author gives the analytic solution of the initial value problem using the operators sh(tP( x) 1/2 )P( x) 1/2 . By representing the operators with integrals, explicit solutions are obtained with an integral form of a given function.
基金Project(2012CB619503) supported by the National Basic Research Program of ChinaProject(51201003) supported by the National Natural Science Foundation of ChinaProject(2142007) supported by Natural Science Foundation of Beijing,China
文摘A comprehensive study on the microstructural evolution of a new type Al-Zn-Mg-Cu-Er-Zr alloy duringhomogenization was conducted by optical microscope,scanning electron microscope,transmission electron microscopy and X-raydiffraction analysis.The results show that serious segregation exists in as-cast alloy,and the primary phases are T(AlZnMgCu),S(Al2CuMg)and Al8Cu4Er,which preferentially locate in the grain boundary regions.The soluble T(AlZnMgCu)and S(Al2CuMg)phases dissolve into the matrix gradually during single-stage homogenized at465°C with prolonging holding time,but the residualAl8Cu4Er phase cannot dissolve completely.Compared with the single-stage homogenization,both a finer particle size and a highervolume fraction of L12-structured Al3(Er,Zr)dispersoids can be obtained in the two-stage homogenization process.A suitablehomogenization scheme for the present alloy is(400°C,10h)+(465°C,24h),which is consistent with the results of homogenizationkinetic analysis.
基金Project(2010CB630903) supported by the National Basic Research Program of China
文摘Chalcopyrite oxidation rates were examined under various conditions in the presence of Leptospirillum ferriphilum,in which the effects of different pulp content,inoculation amount,external addition of Fe3+ and initial pH value were studied.The bioleaching residues were investigated by X-ray diffractograms(XRD),scanning electron microscopy(SEM) and energy dispersion spectrum(EDS) analysis.The results show that low pulp concentration increases the leaching rate of copper,and external addition of Fe3+ is also beneficial to leaching chalcopyrite.The changes of inoculation amount and initial pH from 1.6 to 2.5 have a little effect on the final leaching rate.The results also imply that Fe3+ ions are important for bioleaching of chalcopyrite.At the end of bioleaching,jarosite and sulfur are observed on the surface of chalcopyrite residues by using XRD,SEM and EDS.With the passivation layer formed by jarosite and sulfur,the continuous copper extraction is effectively blocked.
