期刊文献+
共找到6篇文章
< 1 >
每页显示 20 50 100
用于EAST诊断中性束加速极初级电源的设计与仿真 被引量:1
1
作者 朱嘉 杜世俊 刘保华 《通信电源技术》 2007年第4期33-35,共3页
介绍了用于EAST的诊断中性束(DNB)加速极初级电源的设计方案。该方案所提供的电压在20kV^50kV范围内可调,特别是在35kV^50kV能以大约1kV为单位逐步上调,同时电压纹波系数可控制在5%以内,最后对初级电源进行了仿真。仿真结果表明该方案... 介绍了用于EAST的诊断中性束(DNB)加速极初级电源的设计方案。该方案所提供的电压在20kV^50kV范围内可调,特别是在35kV^50kV能以大约1kV为单位逐步上调,同时电压纹波系数可控制在5%以内,最后对初级电源进行了仿真。仿真结果表明该方案完全能达到初级电源的设计要求。 展开更多
关键词 诊断中性束 加速极 初级电源 仿真
下载PDF
电磁发射初级电源技术研究
2
作者 蒋丽萍 李建 陈冲 《电光系统》 2022年第4期48-54,共7页
初级电源系统为脉冲电容提供能量,是电磁发射系统的重要组成部分。基于锂电池与脉冲电容器的复合电源系统,对锂电池储能及高压放电技术进行研究,针对台阶升压、直流斩波、LC串联谐振3种大功率充电控制策略进行仿真,对比分析各自电路模... 初级电源系统为脉冲电容提供能量,是电磁发射系统的重要组成部分。基于锂电池与脉冲电容器的复合电源系统,对锂电池储能及高压放电技术进行研究,针对台阶升压、直流斩波、LC串联谐振3种大功率充电控制策略进行仿真,对比分析各自电路模型的优缺点,结合台阶升压的电池储能分组化设计,提出直流斩波串级输出改进方案,并梳理出初级电源进一步的研究重点。 展开更多
关键词 电磁发射 初级电源系统 超大功率充电及控制
下载PDF
1.0MV Tesla型电子束加速器初级电源的研制
3
作者 龚胜刚 常安碧 +3 位作者 冯弟超 夏世维 甘延青 刘忠 《中国工程物理研究院科技年报》 2003年第1期254-254,共1页
这里介绍了重复频率强流电子束加速器的全固态初级脉冲功率源的设计,安装和调试。初级脉冲功率源主要包括初级储能电路,谐振充电电路,能量补偿电路,能量泄放电路和计算机控制系统。其工作过程主要包括系统初始储能,脉冲电容器放电... 这里介绍了重复频率强流电子束加速器的全固态初级脉冲功率源的设计,安装和调试。初级脉冲功率源主要包括初级储能电路,谐振充电电路,能量补偿电路,能量泄放电路和计算机控制系统。其工作过程主要包括系统初始储能,脉冲电容器放电,气体开关导通,能量补偿,谐振充电等过程。其各个过程严格按照计算机发出的指令脉冲的时序执行。 展开更多
关键词 Tesla型电子束加速器 初级电源 结构设计 谐振充电电路 能量补偿
下载PDF
西门子primus直线加速器高压初级电源电路故障检修
4
作者 肖赵生 戴小阳 《中外医用放射技术》 2001年第10期12-12,共1页
关键词 直线加速器 西门子primus型 高压初级电源电路故障 继电器
原文传递
Preliminary Research on Primary Energy Source of High Current Electron Beam Accelerator Based on Spiral Pulse Forming Line
5
作者 詹天文 刘金亮 +1 位作者 葛斌 殷毅 《Chinese Physics C》 SCIE CAS CSCD 北大核心 2008年第z1期295-297,共3页
In this paper,the primary energy source of high current electron beam accelerator based on spiral pulse forming line is investigated.It consists of the constant-current power supply,the high voltage pulse capacitor,th... In this paper,the primary energy source of high current electron beam accelerator based on spiral pulse forming line is investigated.It consists of the constant-current power supply,the high voltage pulse capacitor,the field distortion switch,and the protection system.The primary energy source can discharge to the primary winding of the transformer with high voltage pulses whose amplitude of voltage is 40kV,current is 80kA,pulse width is 8μs and repetition frequency is less than 5Hz.The primary energy source is applied to a high current electron beam accelerator, and is featured by its compactness,stability and reliability. 展开更多
关键词 primary energy source repetition frequency high current electron beam accelerator
原文传递
Neural circuits and temporal plasticity in hindlimb representation of rat primary somatosensory cortex:revisited by multi-electrode array on brain slices 被引量:1
6
作者 王丹丹 李震 +7 位作者 常颖 王蕊蕊 陈雪峰 赵振宇 曹发乐 金建慧 刘明刚 陈军 《Neuroscience Bulletin》 SCIE CAS CSCD 2010年第3期175-187,共13页
Objective The well-established planar multi-electrode array recording technique was used to investigate neural circuits and temporal plasticity in the hindlimb representation of the rat primary somatosensory cortex (... Objective The well-established planar multi-electrode array recording technique was used to investigate neural circuits and temporal plasticity in the hindlimb representation of the rat primary somatosensory cortex (S1 area) . Methods Freshly dissociated acute brain slices of rats were subject to constant perfusion with oxygenated artificial cerebrospinal fluid (95% O2 and 5% CO2) , and were mounted on a Med64 probe (64 electrodes, 8×8 array) for simultaneous multi-site electrophysiological recordings. Current sources and sinks across all the 64 electrodes were transformed into two-dimensional current source density images by bilinear interpolation at each point of the 64 electrodes. Results The local intracortical connection, which is involved in mediation of downward information flow across layers II-VI, was identified by electrical stimulation (ES) at layers II-III. The thalamocortical connection, which is mainly involved in mediation of upward information flow across layers II-IV, was also characterized by ES at layer IV. The thalamocortical afferent projections were likely to make more synaptic contacts with S1 neurons than the intracortical connections did. Moreover, the S1 area was shown to be more easily activated and more intensively innervated by the thalamocortical afferent projections than by the intracortical connections. Finally, bursting conditioning stimulus (CS) applied within layer IV of the S1 area could success-fully induce long-term potentiation (LTP) in 5 of the 6 slices (83.3%) , while the same CS application at layers II-III induced no LTP in any of the 6 tested slices. Conclusion The rat hindlimb representation of S1 area is likely to have at least 2 patterns of neural circuits on brain slices: one is the intracortical circuit (ICC) formed by interlaminar connections from layers II-III, and the other is the thalamocortical circuit (TCC) mediated by afferent connections from layer IV. Besides, ICC of the S1 area is spatially limited, with less plasticity, while TCC is spatially extensive and exhibits a better plasticity in response to somatosensory afferent stimulation. The present data provide a useful experimental model for further studying microcircuit properties in S1 cortex at the network level in vitro. 展开更多
关键词 planar multi-electrode array two-dimensional current source density imaging primary somatosensory cortex neural circuits long-term potentiation
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部