In order to avoid brittle fracture failure, a ductile engineered cementitious composite （ECC） was attempted in steel/concrete connection zones to replace normal concrete. The influence of the ECC material ductility ...In order to avoid brittle fracture failure, a ductile engineered cementitious composite （ECC） was attempted in steel/concrete connection zones to replace normal concrete. The influence of the ECC material ductility on connection failure modes and structural performance was investigated via the pushout test of stud/ECC connection, the pullout test of two-dimensional anchor bolt/ECC connection and the finite element modeling （FEM）. The experimental results suggest that the micromechanically designed ECC with a tensile ductility 300 times that of normal concrete switches the brittle fracture failure mode to a ductile one in steel connection zones. This modification in material behavior leads to higher load carrying capacity and structural ductility, which is also confirmed in FEM investigation. The enhancement in structural response through material ductility engineering is expected to be applicable to a wide range of engineering structures where steel and concrete come into contact.展开更多
In order to improve the mechanical properties and corrosion resistance of Mg alloys,the equal channel angular extrusion (ECAE)was employed to fabricate the Mg-5Gd-5Y/Mg-2Zn-1Gd(GW55/ZG21)laminated composites.After fab...In order to improve the mechanical properties and corrosion resistance of Mg alloys,the equal channel angular extrusion (ECAE)was employed to fabricate the Mg-5Gd-5Y/Mg-2Zn-1Gd(GW55/ZG21)laminated composites.After fabrication and annealing treatment,the microstructural evolution,phase constitution,microhardness,and bonding strength were investigated on the bonding interface zone of GW55/ZG21 laminated composites.The bonding interface zone of GW55/ZG21 laminated composites comprises a lot of Mg3(Y,Gd)2Zn3 particles along the bonding interface,some rod Mg24(Y,Gd)5 phases on GW55 side,and a precipitation free zone(PFZ)on ZG21 side.After annealing treatment,Mg3(Y,Gd)2Zn3 particles along the bonding interface increase, rod Mg24(Y,Gd)5 phases on GW55 side decrease,and PFZ is broadened.Meanwhile,the hardness on the bonding interface zone decreases and the bonding strength increases from 126 MPa to 162 MPa.展开更多
By dividing the diagenetic reservoir facies and studying its distribution,we can effectively evaluate reservoirs.Using an analytical method for mutual relationships among diagenesis of reservoirs,structural characteri...By dividing the diagenetic reservoir facies and studying its distribution,we can effectively evaluate reservoirs.Using an analytical method for mutual relationships among diagenesis of reservoirs,structural characteristics and the origin of types of sand,we classified the diagenetic reservoir of the Yanchang formation Chang-3 oil layer into different types and analyzed the factors controlling this high quality reservoir.The results show that:1) the catagenesis of the Chang-3 oil layer in the Fuxian region is complex and variable;2) mechanical compaction,pressure solutions and cementation of all kinds of authogenous minerals decreases porosity by 28.13% and 3) corrosion increases porosity by 3.39%.Cementation and corrosion of laumontite is a kind of catagenesis which makes this region different from other exploratory regions.The original amount and rate of corrosion of laumontite are the main factors for the increase in laumontite porosity.The Chang-3 oil layer developed four kinds of diagenetic reservoir facies,of which the weak compaction facies,i.e.,laumontite corrosion and overgrowth,of the original pore reservoir facies has the most promising diagenesis.Its distribution is controlled by a sedimentary facies zone and is widely developed in the original truncated tributary channel facies belt of the delta plain.The development of this high quality reservoir is controlled by the distribution of sedimentary sand bodies and secondarily-eroded porosity of laumontite in the Chang-3 oil layer of the Fuxian exploratory region.展开更多
随着广播电视技术的进步和发展,Tally和源名系统的应用已经成为转播车系统中非常重要的一部分,并且Tally控制系统应用也呈现定制化和复杂化,因此文章首先阐述以TallyMan为代表的Tally源名控制系统的工作逻辑,包括Tally工作机制和源名工...随着广播电视技术的进步和发展,Tally和源名系统的应用已经成为转播车系统中非常重要的一部分,并且Tally控制系统应用也呈现定制化和复杂化,因此文章首先阐述以TallyMan为代表的Tally源名控制系统的工作逻辑,包括Tally工作机制和源名工作机制,然后结合济南广播电视台超高清4K转播车升级和改造的具体设备和制作需求,详细阐述通过TSL实现双区制作Tally、UMD动态源名跟随、JoyStick、矩阵应急Tally、基于event的CCU IP Tally等的具体配置方法,希望为广播电视从业者在系统规划、集成和应用方面提供一定的参考。展开更多
基金The National Natural Science Foundation of China(No. 51008071)the Natural Science Foundation fo Jiangsu Province(No. BK2010413)Teaching & Research Excellence Grant for Young Faculty Members at Southeast University,the US National Science Foundation (No. CMS-0223971,CMS-0329416)
文摘In order to avoid brittle fracture failure, a ductile engineered cementitious composite （ECC） was attempted in steel/concrete connection zones to replace normal concrete. The influence of the ECC material ductility on connection failure modes and structural performance was investigated via the pushout test of stud/ECC connection, the pullout test of two-dimensional anchor bolt/ECC connection and the finite element modeling （FEM）. The experimental results suggest that the micromechanically designed ECC with a tensile ductility 300 times that of normal concrete switches the brittle fracture failure mode to a ductile one in steel connection zones. This modification in material behavior leads to higher load carrying capacity and structural ductility, which is also confirmed in FEM investigation. The enhancement in structural response through material ductility engineering is expected to be applicable to a wide range of engineering structures where steel and concrete come into contact.
基金Project(2007CB613704)supported by the National Basic Research Program of ChinaProject(50874100)supported by the National Natural Science Foundation of China
文摘In order to improve the mechanical properties and corrosion resistance of Mg alloys,the equal channel angular extrusion (ECAE)was employed to fabricate the Mg-5Gd-5Y/Mg-2Zn-1Gd(GW55/ZG21)laminated composites.After fabrication and annealing treatment,the microstructural evolution,phase constitution,microhardness,and bonding strength were investigated on the bonding interface zone of GW55/ZG21 laminated composites.The bonding interface zone of GW55/ZG21 laminated composites comprises a lot of Mg3(Y,Gd)2Zn3 particles along the bonding interface,some rod Mg24(Y,Gd)5 phases on GW55 side,and a precipitation free zone(PFZ)on ZG21 side.After annealing treatment,Mg3(Y,Gd)2Zn3 particles along the bonding interface increase, rod Mg24(Y,Gd)5 phases on GW55 side decrease,and PFZ is broadened.Meanwhile,the hardness on the bonding interface zone decreases and the bonding strength increases from 126 MPa to 162 MPa.
文摘By dividing the diagenetic reservoir facies and studying its distribution,we can effectively evaluate reservoirs.Using an analytical method for mutual relationships among diagenesis of reservoirs,structural characteristics and the origin of types of sand,we classified the diagenetic reservoir of the Yanchang formation Chang-3 oil layer into different types and analyzed the factors controlling this high quality reservoir.The results show that:1) the catagenesis of the Chang-3 oil layer in the Fuxian region is complex and variable;2) mechanical compaction,pressure solutions and cementation of all kinds of authogenous minerals decreases porosity by 28.13% and 3) corrosion increases porosity by 3.39%.Cementation and corrosion of laumontite is a kind of catagenesis which makes this region different from other exploratory regions.The original amount and rate of corrosion of laumontite are the main factors for the increase in laumontite porosity.The Chang-3 oil layer developed four kinds of diagenetic reservoir facies,of which the weak compaction facies,i.e.,laumontite corrosion and overgrowth,of the original pore reservoir facies has the most promising diagenesis.Its distribution is controlled by a sedimentary facies zone and is widely developed in the original truncated tributary channel facies belt of the delta plain.The development of this high quality reservoir is controlled by the distribution of sedimentary sand bodies and secondarily-eroded porosity of laumontite in the Chang-3 oil layer of the Fuxian exploratory region.
文摘随着广播电视技术的进步和发展,Tally和源名系统的应用已经成为转播车系统中非常重要的一部分,并且Tally控制系统应用也呈现定制化和复杂化,因此文章首先阐述以TallyMan为代表的Tally源名控制系统的工作逻辑,包括Tally工作机制和源名工作机制,然后结合济南广播电视台超高清4K转播车升级和改造的具体设备和制作需求,详细阐述通过TSL实现双区制作Tally、UMD动态源名跟随、JoyStick、矩阵应急Tally、基于event的CCU IP Tally等的具体配置方法,希望为广播电视从业者在系统规划、集成和应用方面提供一定的参考。
