Including information of the current road surface conditions can significantly improve the effectiveness of an AEB （automated emergency braking） system to avoid accidents or reduce the injury severity in rear-end cr...Including information of the current road surface conditions can significantly improve the effectiveness of an AEB （automated emergency braking） system to avoid accidents or reduce the injury severity in rear-end crashes. A method to estimate the friction potential based on on-board sensor information is shown in this work. This work expands the scope of existing investigations on whether the accuracy needed for the warning and intervention strategies of AEB can be reached with the proposed method. First, the bandwidth of surface conditions investigated is extended by including low friction surfaces comparable to ice. Second, situations of changing surface conditions and wheel-individual surface conditions were evaluated. Finally, estimation based on different sensor sets was conducted with regard to series application. The investigations are based on measurements performed on a proving ground. The main emphasis was placed on estimation during longitudinal driving conditions. The used sensors include advanced vehicle dynamics measurement equipment as well as standard on-board sensors of the vehicle.展开更多
The indirect vector controlled IM （induction motor） drive involves decoupling of the stator current into torque and flux producing components. This paper proposes the implementation of a fuzzy logic control scheme a...The indirect vector controlled IM （induction motor） drive involves decoupling of the stator current into torque and flux producing components. This paper proposes the implementation of a fuzzy logic control scheme applied to a two d-q current components model of an induction motor. An intelligent based on fuzzy logic controller is developed with the help of knowledge rule base for efficient control. The performance of fuzzy logic controller is compared with that of the proportional integral controller in terms of the settling time and dynamic response to sudden load changes. The harmonic pattern of the output current is evaluated for both fixed gain proportional integral controller and the fuzzy logic based controller. The performance of the IM drive has been analyzed under steady state and transient conditions. Simulation results of both the controllers are presented for comparison.展开更多
文摘Including information of the current road surface conditions can significantly improve the effectiveness of an AEB （automated emergency braking） system to avoid accidents or reduce the injury severity in rear-end crashes. A method to estimate the friction potential based on on-board sensor information is shown in this work. This work expands the scope of existing investigations on whether the accuracy needed for the warning and intervention strategies of AEB can be reached with the proposed method. First, the bandwidth of surface conditions investigated is extended by including low friction surfaces comparable to ice. Second, situations of changing surface conditions and wheel-individual surface conditions were evaluated. Finally, estimation based on different sensor sets was conducted with regard to series application. The investigations are based on measurements performed on a proving ground. The main emphasis was placed on estimation during longitudinal driving conditions. The used sensors include advanced vehicle dynamics measurement equipment as well as standard on-board sensors of the vehicle.
文摘The indirect vector controlled IM （induction motor） drive involves decoupling of the stator current into torque and flux producing components. This paper proposes the implementation of a fuzzy logic control scheme applied to a two d-q current components model of an induction motor. An intelligent based on fuzzy logic controller is developed with the help of knowledge rule base for efficient control. The performance of fuzzy logic controller is compared with that of the proportional integral controller in terms of the settling time and dynamic response to sudden load changes. The harmonic pattern of the output current is evaluated for both fixed gain proportional integral controller and the fuzzy logic based controller. The performance of the IM drive has been analyzed under steady state and transient conditions. Simulation results of both the controllers are presented for comparison.
