CIGS薄膜太阳能电池吸收层用硒化物的制备

介绍了CIGS的性能和作用,探讨了硒化物靶材的制备方法。试验表明经过真空梯度合成、热压烧结等工艺可产出纯度99.999%和密度99.1%以上的CIGS薄膜太阳能电池吸收层用硒化物靶材。流程所用设备简单,操作简便,适用于工业化生产。

An experimental study on thermal characteristics of nanofluid with graphene and multi-wall carbon nanotubes

High-thermal conductivity enhancement of nanofluid is one of the promising topics of the nanoscience research field. This work reports the experimental study on the preparation of graphene(GN) and multi-walled carbon nanotubes(MWCNTs) based nanofluids with the assistance of sodium dodecyl benzene sulfonate(SDBS) and sodium dodecyl sulfate(SDS) surfactants, and their thermal behaviors. The present work suggests not a solution, but a solution approach and deduces a new conclusion by trying to resolve the agglomeration problem and improve the dispersibility of nanoparticles in the base fluid. The analysis results of FESEM, thermal conductivity, diffusivity, effusivity and heat transfer coefficient enhancement ratio of nanofluid with surfactants SDS and SDBS expose strong evidence of the dispersing effect of surfactant on the making of nanofluid.

Experimental investigation of key parameters pertinent to multi-hole orifice throttling characteristic

This study firstly defines a set of arrangement rule for perforated holes of multi-hole orifice(MO), and then presents three critical geometrical parameters including total number of performated hole, equivalent diameter ratio and distribution density of perforated holes, which are to quantify MO structure. This paper built the throttling test apparatus for nice test MO plates, which were designed according to orthogonal theory. The experiments were conducted to investigate the effect of three critical geometerical parameters on the pressure loss coefficient of test MOs. Results show that equivalent diameter ratio is the dominant prameter affecting MO throttling characterstic.

Effects of Collagen Peptide from Cyanea nozakii on Mouse Immune Function

[Objective ] The study aimed to provide a theoretical basis for the clinical application of collagen peptide from Cyanea nozakii. [ Method] After acute toxicity test on mice, collagen peptide from C. nozakii were given to mice by continuous intragastric administration for 30 d at the doses of 25, 50, 100 mg/kg, and then the phagocytosis of macrophage, delayed type hypersensitivity （DTH） and serum hemolysin level were determined. [ Result] Collagen peptide from C. nozakii was atoxic or low toxic, and the three immune indices of experimental groups were signifi- canUy higher than those of the control group （treated with same volume of normal saline） at 0.05 or 0.01 level. E Conclusion] Collagen peptide from C. nozakii has a certain immunopotentiation.

Changes in char reactivity due to char-oxygen and char-steam reactions using Victorian brown coal in a fixed-bed reactor

This study was to examine the influence of reactions of char–O2and char–steam on the char reactivity evolution.A newly-designed fixed-bed reactor was used to conduct gasification experiments using Victorian brown coal at800 °C. The chars prepared from the gasification experiments were then collected and subjected to reactivity characterisation(ex-situ reactivity) using TGA(thermogravimetric analyser) in air. The results indicate that the char reactivity from TGA was generally high when the char experienced intensive gasification reactions in 0.3%O2in the fixed-bed reactor. The addition of steam into the gasification not only enhanced the char conversion significantly but also reduced the char reactivity dramatically. The curve shapes of the char reactivity with involvement of steam were very different from that with O2 gasification, implying the importance of gasifying agents to char properties.

Pressured Microwave-assisted Hydrolysis of Crude Glycyrrhizic Acid for Preparation of Glycyrrhetinic Acid

A pressured microwave-assisted hydrolysis （PMAH） technique has been developed for hydrolyzing the crude glycyrrhizic acid （GA） extracted from licorice root to prepare glycyrrhetinic acid （GRA）. In order to optimize the efficiency of PMAH, several experimental parameters were investigated, including liquid-solid ratio, hydrolysis time, sulfuric acid concentration and hydrolysis temperature. The optimized hydrolysis conditions were as follows：pressured microwave-assisted hydrolysis of crude GA for 21 min （taking 15 min to reach 150 ℃, and holding it for 6 rain） at 150 ℃ （at a radiation power of 450 W） in 3%-5% sulfuric acid solution with the liquid-solid （ml.g-1 crude GA） ratio of 25 ： 1. As a result of the considerable saving in time and higher product yields （up to 90%）, PMAH was proved more effective than conventional methods.

Isomerization of alkyl naphthalene and refining of 2-methylnaphthalene

A preparation process of 2-methylnaphthalene （2-MN） was proposed by isomerization, side-stream distillation and extractive distillation. The isomerization of alkyl naphthalene was catalyzed by acid-treated HBEA zeolites, and the 2-MN selectivity of isomerization was 92.70%. Side-stream distillation and extractive distillation were investigated by simulation, and effects of operation parameters on 2-MN were studied. Further, the simulated results were verified by experiment. Under the optimal condition, the mass fraction of 2-MN reached to 98.09%; in the oroduct, and the yield was 83.84% in refining orocess.

Preparation and coking properties of coal maceral concentrates

The concentrates with different maceral contents were obtained from Kailuan coking coals with different coal ranks(Ro;ranvarying from 0.88%to 1.73%)by float–sink separation in lab.Then these concentrates were characterized by proximate analysis,ultimate analysis,petrography analysis and coking index determination.The results show that the vitrinite is characterized as nature of lower carbon content,higher hydrogen content,higher volatile matter and stronger caking property compared to inertinite.The relationships between variation rate of volatile matter and maximum volatile matter and coal ranks are identified,and a linear model is developed for fast determination of the maceral contents.Compared to inertinite-rich concentrate,the blending ratio of vitrinite-rich concentrate is increased by 13%,which is considered to be a potential technique based on maceral separation for expanding the coking coal resources.

Study on the comparison of the pyrolysis gas release of lignite and its briquette

In this experiment, lignite was refined and processed through binderless briquette preparation process from low-rank coal and became briquette. Then, lignite and its briquette were pyrolysed as materials to compare the nature of their pyrolysis. In this study, the experiment was carried out through a lab tube furnace, at a heating rate of 10 ~C/min, and the gas was analyzed and compared, which was collected at different temperatures. The results show that： in the pyrolysis temperature of 550-850 ℃, the semi-coke yield of briquette is 2%-6% higher than lignite, the tar yield of briquette is 2%-3% higher than lignite and the gas yield of briquette is 4%-9% less than lignite. The time required for complete release of the briquette is about 20 min less than lignite. The components in the pyrolysis gas of lignite and its briquette are the same, and their variation with the pyrolysis temperature is similar.

Experiments and Modeling of the Preparation of Ultrafine Calcium Carbonate in Spouted Beds with Inert Particles

A novel reaction-drying process was carried out in a spouted bed reactor with inert particles and used to prepare ultrafine CaCO3 particles. Effects of concentrations of CO2 and Ca(OH)2, and reaction temperature on Ca(OH)2 conversion were experimentally investigated. The particle sizes and composition of CaCO3 produced were characterized with transmission electron microscopy (TEM) and X-ray diffraction (XRD). The results indicated that ultrafine CaCO3 particles with mean size of 80 nm could be obtained with this novel process.By modifying the Arrhenius Equation and considering the Ca(OH)2 state, a kinetic model was established to describe the process in the spouted bed. The model parameters estimated from the reaction-drying experiments were found to fit well the experimental data, indicating the applicability of the proposed kinetic model.

Relevance of Dried Meat Product （Kundi）, an Intermediate Moisture Meat, for Food Security

The main goal of food security is for individual to be able to obtain adequate and quality food needed at all times, and to utilise the food to meet the body needs. Kundi is a relish Intermediate Moisture Meat （dried meat） product, produced in the Northern part of Nigeria. 2-3 years old male Camelus dromedarius and White Fulani animals were used for this study, 2 kg of semimembranous muscles from each animal were used, and trimmed of all external fat, connective tissues and bones. Meat samples were cut in sizeable pieces of weight ranges 70-90 grams of 6-8 cm and kept in the refrigerator for 24 hours. Fresh meat cuts were boiled for 20 minutes at 100 ~C, seasoned and oven dried for 3 hours at 170 ~C. This study assessed the proximate composition of fresh and dried meat （Kundi） products and their sensory evaluation in a completely randomized design. The results showed that fresh camel meat had 74.55% and 21.96% significantly （P 〈 0.05） higher in moisture and protein content than 72.69% and 18.96% of fresh beef, while fresh beef had higher （P 〈 0.05） ether extract （6.34%） than fresh camel meat （2.39%）. Laboratory Prepared Beef Kundi （LPBK） had the highest （P 〈 0.05） value in moisture content 35.09% followed by Laboratory Prepared Camel ＇Kundi＇ （LPCK） with 33.21% while Commercial Kundi （CK） had the least. Protein obtained was inversely proportionally to moisture content. Ether extract for LPCK and LPBK were statistically similar （P 〉 0.05） and both were lower （P 〈 0.05） than value obtained for CK. The results obtained for sensory evaluation showed that the panelist rated seasoned Kundi to have the highest significant （P 〈 0.05） valve for tenderness, flavour, colour, juiciness, texture and acceptability with values 6.50, 5.30, 6.50, 6.53, 6.30 and 7.00 respectively. Study showed that dry meat products （Kundi） is of high nutritional qualities, and could be of a great relevance; to food security.

The Preparation of Ultra-fine Calcium Carbonate and Its properties Study

This article adopts the double decomposition method, select the appropriate experimental conditions and operation process, respectively add appropriate amount of sodium carboxymethyl cellulose （CMC） as crystal control agent to study the influence of crystalline of ultrafine calcium carbonate. The experimental results show that the different concentrations of CMC as crystal control agent on the morphology and crystal structure of calcium carbonate have obvious effect, which emerge morphology change from square to spherical, crystalline transition from calcite to aragonite. Thus, the results provide experimental data and theoretical basis for the use of different additives, and provide experimental basis and feasible solution for this kind of reaction.

Design, Fabrication and Experimentation of a Deep Drawing Machine

This paper presents the work implemented in designing, fabricating and operating a model of a cheap hydraulic DDM （deep drawing machine）, which is currently utilized in the manufacturing processes lab in the IED （Industrial Engineering Department） at An-Najah National University. The machine is used to conduct different experiments related to the deep drawing process. This work was implemented in three stages： the first was the design stage, in which all design calculations of the DDM elements were completed based on the specifications of the product （cup） to be drawn; the second was the construction stage, in which the DDM elements were fabricated and assembled at the engineering workshops of the university; the last was the operating and experimentation stage, in which the DDM was tested by conducting different experiments. The experience gained from designing and constructing such a mechanical lab equipment was found to be successful in terms of obtaining practical results that agree with those available in literature, cost-effective relative to the cost of a similar purchased equipment, as well as enhancing students＇ abilities in understanding the deep drawing process in particular and machine elements design concepts in general.

Preparation of Rapid Hardening Mortars Using Ultrafine Portland Cement

During the hydration process, the Ultra-fine Cements present specific physical and chemical characteristics; they are, very short setting time and high heat release. For special applications, such as rapid hardening and early high strength mortars or concretes, these characteristics can be considered advantageous. Some commercial products used for concrete reinforcement and repairs are the Rapid Hardening Mortars, these mortars must develop a time of setting up to 3 h and an initial compressive strength of about 3.5 MPa once the hardening of the paste is reached. The objective of the present research work is to use Ultra-fine Cement for the preparation of a series of different Rapid Hardening Mortars （with different percentages of Ultra-fine Cement）, these mortars required the addition of a polycarboxylate-base specification F Superplasticizer. It was observed that the optimum water/cement （W/C） ratio for the hydration of the Ultra-fine Cements is W/C = 0.385. The Ultra-fine Cements were obtained by the High Energy Ball-milling technique at laboratory scale, 90% of the Particle Size Distribution is below 11 μm and the Blaine Specific Surface Area is over 9000 cm^2/g.

Study on Microwave Preparation of Conjugated Linoleic Acid from Corn Germ Oil

[Objective] The optimal craft of preparing conjugated linoleic acid from corn germ oil by dint of microwave method was studied. [Meth- od] Microwave power, microwave mode of action, the amount of catalyst and solvent were selected for single-factor-experiment. Then, based on the single-factor-experiment, the catalyst and solvent amount, and microwave function time were chosen for orthogonal experiment so as to deter- mine the optimal craft of preparing CLA from corn germ oil. UV absorption spectra and infrared absorption spectrum were used to analyse the struc- tural features of natural corn germ oil and CLA. [Resalt] The optimal preparation condition was as follow： the catalyst was 0.6 times heavier than oil, solvent was 3 times heavier than oil weight, microwave worked for ten minutes. Under the optimal condition, CLA was 56.3% and conversion rate was 99.47 %. The results indicated that non-conjugated double bonds of linoleic acid can be isomerized and changed into conjugated double bonds under the conditions of microwave irradiation,[ Conduslon] The study provided a new way for the preparation of CLA.

Unsteady Internal Flow Conditions of Mini-Centrifugal Pump with Splitter Blades

Mini centrifugal pumps having a diameter smaller than lOOmm are employed in many fields. But the design method for the mini centrifugal pump is not established because the internal flow condition for these small-sized fluid machines is not clarified and conventional theory is not suitable for small-sized pumps. Therefore, mini cen- trifugal pumps with simple structure were investigated by this research. Splitter blades were adopted in this re- search to improve the performance and the internal flow condition of mini centrifugal pump which had large blade outlet angle. The original impeller without the splitter blades and the impeller with the splitter blades were prepared for experiment. The performance tests are conducted with these rotors in order to investigate the effect of the splitter blades on performance and internal flow condition of mini centrifugal pump. On the other hand, a three dimensional unsteady numerical flow analysis was conducted to investigate the change of the internal flow according to the rotor rotation. It is clarified from the experimental results that the performance of the mini cen- trifugal pump is improved by the splitter blades. The blade-to-blade low velocity region was suppressed in the case with the splitter blades. In addition to that, the unsteady flows near the volute casing tongue were suppressed due to the splitter blades. In the present paper, the performance of the mini centrifugal pump is shown and the un- steady flow condition is clarified with the results of the numerical flow analysis. Furthermore, the effects of the splitter blades on the performance and the unsteady internal flow condition are investigated.

Preparation of multipartite entangled states used for quantum information networks

The preparation of multipartite entangled states is the prerequisite for exploring quantum information networks and quantum computation.In this paper,we review the experimental progress in the preparation of cluster states and multi-color entangled states with continuous variables.The preparation of lager scale multipartite entangled state provide valuable quantum resources to implement more complex quantum informational tasks.

Ultrasound speed and attenuation in progressive trypsin digested articular cartilage

Subtle changes of articular cartilage(AC) can lead to tissue degeneration and even osteoarthritis(OA).The early degeneration of AC is closely related to a change in proteoglycans(PG) content.The observation of PG is therefore an appropriate way of studying OA and evaluating the degree of AC degeneration.In this study,20 cartilage-bone samples were prepared from normal porcine femoral condyle cartilage and 10 samples were digested over 2 h using 0.25% trypsin solution.The dynamic process of PG-digestion was explored using a conventional A-mode ultrasound(US) experimental system with a 10 MHz center frequency.Quantitative acoustic parameters were calculated from ultrasonic radio-frequency echo signals and included US speed(USS),US amplitude attenuation coefficient(UAA) and broadband US attenuation coefficient(BUA).The experimental results showed that the conventional A-mode ultrasound is valuable for tracking the degree of PG-digestion.Histology also confirmed the validity of the ultrasound observations.For every AC sample,the degree of PG-digestion within a given time was different and was affected by individual differences.After two hours of degeneration,USS showed a mean decrease of 0.4%(P<0.05).UAA was significantly lower after a two-hour PG depletion period(from(2.45±0.23) to(2.28±0.41) dB mm?1).BUA showed no significant differences during this process.In conclusion,conventional ultrasound can provide useful information about trypsin-induced progressive PG depletion in AC and can reflect variations of PG content via the quantitative acoustic parameters USS and UAA.The results of this study may be used to identify an indirect indicator of cartilage matrix integrity and OA disease progression.

Structural and optical properties of ZnO films prepared by ion beam sputtering

Based on the ion beam sputtering deposition technology,ZnO thin films are deposited on the glass substrate.The four-factor and three-level L 9(34)orthogonal experiment is used to obtain the best technological parameters of the deposited ZnO thin films,which are the discharge voltage of 3.5 kV,the oxygen current capacity of 8 sccm,the coil current of 8 A and the distance between target and substrate of 140 mm.The purity of the deposited ZnO thin film is 85.77%,and it has good crystallization in orientation.The experimental results show that research and development of the ion beam sputtering source are advanced,and the ion beam sputtering deposition technology can be used to deposit the orientation preferred thin films with good performance.

Experimental study on a cryosurgery apparatus

Cryosurgery is an effective way of curing many diseases including tumors and cancers. It can be applied using a variety of systems and cryogens. Cheap, convenient, reliable equipment still needs to be developed so that cryotherapy may be accepted by surgeons and hospitals. This paper presents a cryosurgery apparatus that utilizes an auto-cascade refrigeration system. Refrigerant mixture R50/R23/R600a was selected as the working fluid. The mixture composition was altered to achieve lower temperatures and higher capacity. The lowest temperature at the cryoprobe could be as low as -100℃, and 8 W refrigeration capacity could be obtained at -80 ℃. An ice ball of 11.6 mm diameter could be formed when the cryoprobe was immersed in a water bath at 37 ℃.