The Dynamic Matrix Control （DMC） algorithm tor integral processes is investigated in this paper. The reason why the original DMC algorithm cannot be applied to these processes is analyzed. The shifting matrix is tra...The Dynamic Matrix Control （DMC） algorithm tor integral processes is investigated in this paper. The reason why the original DMC algorithm cannot be applied to these processes is analyzed. The shifting matrix is transformed into another form and the corresponding theorem is proved, then its applicable range is extended. Compared with other algorithms on the integral processes, this algorithm is more practical and simple to implement. Simulation results also prove its validity. Applying this algorithm, we succeed in the control of the boiler level system in power units.展开更多
In order to build a ceramic component by inkjet printing, the object must be fabricated through the interaction and solidification of drops, typically in the range of 10–100 p L. In order to achieve this goal, stable...In order to build a ceramic component by inkjet printing, the object must be fabricated through the interaction and solidification of drops, typically in the range of 10–100 p L. In order to achieve this goal, stable ceramic inks must be developed. These inks should satisfy specific rheological conditions that can be illustrated within a parameter space defined by the Reynolds and Weber numbers. Printed drops initially deform on impact with a surface by dynamic dissipative processes, but then spread to an equilibrium shape defined by capillarity. We can identify the processes by which these drops interact to form linear features during printing, but there is a poorer level of understanding as to how 2D and 3D structures form. The stability of 2D sheets of ink appears to be possible over a more limited range of process conditions that is seen with the formation of lines. In most cases, the ink solidifies through evaporation and there is a need to control the drying process to eliminate the "coffee ring" defect. Despite these uncertainties, there have been a large number of reports on the successful use of inkjet printing for the manufacture of small ceramic components from a number of different ceramics. This technique offers good prospects as a future manufacturing technique. This review identifies potential areas for future research to improve our understanding of this manufacturing method.展开更多
In the research field of ground water, hydraulic gradient is studied for decades. In the consolidation field, hydraulic gradient is yet to be investigated as an important hydraulic variable. So, the variation of hydra...In the research field of ground water, hydraulic gradient is studied for decades. In the consolidation field, hydraulic gradient is yet to be investigated as an important hydraulic variable. So, the variation of hydraulic gradient in nonlinear finite strain consolidation was focused on in this work. Based on lab tests, the nonlinear compressibility and nonlinear permeability of Ningbo soft clay were obtained. Then, a strongly nonlinear governing equation was derived and it was solved with the finite element method.Afterwards, the numerical analysis was performed and it was verified with the existing experiment for Hong Kong marine clay. It can be found that the variation of hydraulic gradient is closely related to the magnitude of external load and the depth in soils. It is interesting that the absolute value of hydraulic gradient(AVHG) increases rapidly first and then decreases gradually after reaching the maximum at different depths of soils. Furthermore, the changing curves of AVHG can be roughly divided into five phases. This five-phase model can be employed to study the migration of pore water during consolidation.展开更多
The floatability of diaspore and three kinds of silicate minerals,including kaolinite,illite and pyrophyllite,by a cationic Gemini surfactant as collector and starch as depressant was investigated as function of reage...The floatability of diaspore and three kinds of silicate minerals,including kaolinite,illite and pyrophyllite,by a cationic Gemini surfactant as collector and starch as depressant was investigated as function of reagents concentration and pulp pH.Further studies of artificially mixed minerals and bauxite ore were also detailedly conducted.At last,the pre-desliming reverse flotation separation process was adopted.It can be concluded that the combinational use of a Gemini cationic collector and the starch depressant is effective.The concentrates with Al2O3 to SiO2 mass ratio of 9.66 and the recovery of Al2O3 of 71.73% are obtained from natural bauxite ore(A/S=5.70) at pH value of around 10.展开更多
Two different grinding processes were examined to determine the effect grinding has on the quality of a CWS. A series of slurries was prepared from Australian (Au) and Chinese (YZ) coals. Both types of coal were groun...Two different grinding processes were examined to determine the effect grinding has on the quality of a CWS. A series of slurries was prepared from Australian (Au) and Chinese (YZ) coals. Both types of coal were ground by a Chinese (CUMT) and an Australian (JK) grinding process. The performance tests of the prepared CWS showed that fluidity of all slurries was acceptable. The concentration of the CWS from YZ coal ground by the CUMT grinding process was higher than when the JK grinding process was used. The highest concentration was 70.14% in this case. The concentration of the CWS prepared from Au coal by the JK grinding process was higher than when the CUMT grinding process was used. The highest con- centration in this case was 70.97%. These differences are caused by the particle size distribution devel- oped during the different grinding processes.展开更多
The cut tobacco transporting is the absolutely necessarily important tache, Whether the transportation process stability is a direct impact on production quality and manufacturing standards. The wind system is adopted...The cut tobacco transporting is the absolutely necessarily important tache, Whether the transportation process stability is a direct impact on production quality and manufacturing standards. The wind system is adopted by most tobacco companies because of it caused least disruptive of the cut tobacco structure and the pipe network layout of system is flexible, but the wind system is greater influence by itself, different control methods are caused greater difference of process indicators, for example essence and spice ingredients, moisture proportion and smoke flavor. Based on the above reasons, so we need to design the control method of wind system necessarily, in addition we must checkout the control accuracy opportunely, so that it is satisfied by the actual working conditions.展开更多
Cement production is characterized by its great capacity, long-time delay, multi variables, difficult measurement and multi disturbances. According to the distributed intelligent control strategy based on the multi (a...Cement production is characterized by its great capacity, long-time delay, multi variables, difficult measurement and multi disturbances. According to the distributed intelligent control strategy based on the multi (agent,) the multi agent control system of cement production is built, which includes integrated optimal control and diagnosis control. The distributed and multiple level structure of multi agent system for the cement control is studied. The optimal agent is in the distributed state, which aims at the partial process of the cement production, and forms the optimal layer. The diagnosis agent located on the diagnosis layer is the diagnosis unit which aims at the whole process of the cement production, and the central management unit of the system. The system cooperation is realized by the communication among optimal agents and diagnosis agent. The architecture of the optimal agent and the diagnosis agent are designed. The detailed functions of the optimal agent and the diagnosis agent are analyzed. At last the realization methods of the agents are given, and the application of the multi agent control system is presented. The multi agent system has been successfully applied to the off-line control of one cement plant with capacity of 5 000 t/d. The results show that the average yield of the clinker increases 9.3% and the coal consumption decreases 7.5 kg/t.展开更多
In several countries, the residual RHA （rice husk ash） has been produced in rice processing industries or in thermoelectric plants that use rice husk to generate heat and/or electrical energy, usually without burnin...In several countries, the residual RHA （rice husk ash） has been produced in rice processing industries or in thermoelectric plants that use rice husk to generate heat and/or electrical energy, usually without burning process control. This causes a reduction in the amorphous silica content of residual RHA, which distinguishes them from the RHA produced according to controlled burning process, which is totally amorphous and considered a highly reactive pozzolan. In this paper, the hydration products and the porous structure of binders paste were studied by replacing, in weight of 5%, 10% and 20% of Portland cement OPC （ordinary Portland cement）, by residual RHAs named A and B, which have high and low content of amorphous silica, respectively, using microstructure evaluation techniques as XRD （X-ray diffraction）, TG （thermogravimetric） tests and MIP （mercury intrusion porosimetry）. A reducing the size of the pores of the pastes was observed according to the increase of content replacement of RHA A and RHA B.展开更多
Application of temperature gradient to a binary solution can work as a separation process like freezing desalination. Initial salinity is an important parameter on the final composition of the water obtained. In this ...Application of temperature gradient to a binary solution can work as a separation process like freezing desalination. Initial salinity is an important parameter on the final composition of the water obtained. In this paper, the authors study experimentally the effect of the concentration in aqueous solution on the double diffusion with phase change. NaCI-H20 solution at different salinity is frozen in a rectangular cavity to obtain ice becoming fresh water. Temperature, concentration and rate growth of the interface ice/brine are presented. Three concentrations are tested： 0.02%, 1% and 3.5%.展开更多
文摘The Dynamic Matrix Control （DMC） algorithm tor integral processes is investigated in this paper. The reason why the original DMC algorithm cannot be applied to these processes is analyzed. The shifting matrix is transformed into another form and the corresponding theorem is proved, then its applicable range is extended. Compared with other algorithms on the integral processes, this algorithm is more practical and simple to implement. Simulation results also prove its validity. Applying this algorithm, we succeed in the control of the boiler level system in power units.
文摘In order to build a ceramic component by inkjet printing, the object must be fabricated through the interaction and solidification of drops, typically in the range of 10–100 p L. In order to achieve this goal, stable ceramic inks must be developed. These inks should satisfy specific rheological conditions that can be illustrated within a parameter space defined by the Reynolds and Weber numbers. Printed drops initially deform on impact with a surface by dynamic dissipative processes, but then spread to an equilibrium shape defined by capillarity. We can identify the processes by which these drops interact to form linear features during printing, but there is a poorer level of understanding as to how 2D and 3D structures form. The stability of 2D sheets of ink appears to be possible over a more limited range of process conditions that is seen with the formation of lines. In most cases, the ink solidifies through evaporation and there is a need to control the drying process to eliminate the "coffee ring" defect. Despite these uncertainties, there have been a large number of reports on the successful use of inkjet printing for the manufacture of small ceramic components from a number of different ceramics. This technique offers good prospects as a future manufacturing technique. This review identifies potential areas for future research to improve our understanding of this manufacturing method.
基金Project(51378469)supported by the National Natural Science Foundation of ChinaProject(Y1111240)supported by the Zhejiang Provincial Natural Science Foundation of ChinaProject(2013A610196)supported by the Natural Science Foundation of Ningbo City,China
文摘In the research field of ground water, hydraulic gradient is studied for decades. In the consolidation field, hydraulic gradient is yet to be investigated as an important hydraulic variable. So, the variation of hydraulic gradient in nonlinear finite strain consolidation was focused on in this work. Based on lab tests, the nonlinear compressibility and nonlinear permeability of Ningbo soft clay were obtained. Then, a strongly nonlinear governing equation was derived and it was solved with the finite element method.Afterwards, the numerical analysis was performed and it was verified with the existing experiment for Hong Kong marine clay. It can be found that the variation of hydraulic gradient is closely related to the magnitude of external load and the depth in soils. It is interesting that the absolute value of hydraulic gradient(AVHG) increases rapidly first and then decreases gradually after reaching the maximum at different depths of soils. Furthermore, the changing curves of AVHG can be roughly divided into five phases. This five-phase model can be employed to study the migration of pore water during consolidation.
基金Project(50874118) supported by the National Natural Science Foundation of ChinaProject(2007B52) supported by the Foundation for the Author of National Excellent Doctoral Dissertation of ChinaProject(2005CB623701) supported by the National Basic Research Program of China
文摘The floatability of diaspore and three kinds of silicate minerals,including kaolinite,illite and pyrophyllite,by a cationic Gemini surfactant as collector and starch as depressant was investigated as function of reagents concentration and pulp pH.Further studies of artificially mixed minerals and bauxite ore were also detailedly conducted.At last,the pre-desliming reverse flotation separation process was adopted.It can be concluded that the combinational use of a Gemini cationic collector and the starch depressant is effective.The concentrates with Al2O3 to SiO2 mass ratio of 9.66 and the recovery of Al2O3 of 71.73% are obtained from natural bauxite ore(A/S=5.70) at pH value of around 10.
基金This project received funding from the Australian governmentas part of the Asia-Pacific Partnership on Clean Development and Climate
文摘Two different grinding processes were examined to determine the effect grinding has on the quality of a CWS. A series of slurries was prepared from Australian (Au) and Chinese (YZ) coals. Both types of coal were ground by a Chinese (CUMT) and an Australian (JK) grinding process. The performance tests of the prepared CWS showed that fluidity of all slurries was acceptable. The concentration of the CWS from YZ coal ground by the CUMT grinding process was higher than when the JK grinding process was used. The highest concentration was 70.14% in this case. The concentration of the CWS prepared from Au coal by the JK grinding process was higher than when the CUMT grinding process was used. The highest con- centration in this case was 70.97%. These differences are caused by the particle size distribution devel- oped during the different grinding processes.
文摘The cut tobacco transporting is the absolutely necessarily important tache, Whether the transportation process stability is a direct impact on production quality and manufacturing standards. The wind system is adopted by most tobacco companies because of it caused least disruptive of the cut tobacco structure and the pipe network layout of system is flexible, but the wind system is greater influence by itself, different control methods are caused greater difference of process indicators, for example essence and spice ingredients, moisture proportion and smoke flavor. Based on the above reasons, so we need to design the control method of wind system necessarily, in addition we must checkout the control accuracy opportunely, so that it is satisfied by the actual working conditions.
文摘Cement production is characterized by its great capacity, long-time delay, multi variables, difficult measurement and multi disturbances. According to the distributed intelligent control strategy based on the multi (agent,) the multi agent control system of cement production is built, which includes integrated optimal control and diagnosis control. The distributed and multiple level structure of multi agent system for the cement control is studied. The optimal agent is in the distributed state, which aims at the partial process of the cement production, and forms the optimal layer. The diagnosis agent located on the diagnosis layer is the diagnosis unit which aims at the whole process of the cement production, and the central management unit of the system. The system cooperation is realized by the communication among optimal agents and diagnosis agent. The architecture of the optimal agent and the diagnosis agent are designed. The detailed functions of the optimal agent and the diagnosis agent are analyzed. At last the realization methods of the agents are given, and the application of the multi agent control system is presented. The multi agent system has been successfully applied to the off-line control of one cement plant with capacity of 5 000 t/d. The results show that the average yield of the clinker increases 9.3% and the coal consumption decreases 7.5 kg/t.
文摘In several countries, the residual RHA （rice husk ash） has been produced in rice processing industries or in thermoelectric plants that use rice husk to generate heat and/or electrical energy, usually without burning process control. This causes a reduction in the amorphous silica content of residual RHA, which distinguishes them from the RHA produced according to controlled burning process, which is totally amorphous and considered a highly reactive pozzolan. In this paper, the hydration products and the porous structure of binders paste were studied by replacing, in weight of 5%, 10% and 20% of Portland cement OPC （ordinary Portland cement）, by residual RHAs named A and B, which have high and low content of amorphous silica, respectively, using microstructure evaluation techniques as XRD （X-ray diffraction）, TG （thermogravimetric） tests and MIP （mercury intrusion porosimetry）. A reducing the size of the pores of the pastes was observed according to the increase of content replacement of RHA A and RHA B.
文摘Application of temperature gradient to a binary solution can work as a separation process like freezing desalination. Initial salinity is an important parameter on the final composition of the water obtained. In this paper, the authors study experimentally the effect of the concentration in aqueous solution on the double diffusion with phase change. NaCI-H20 solution at different salinity is frozen in a rectangular cavity to obtain ice becoming fresh water. Temperature, concentration and rate growth of the interface ice/brine are presented. Three concentrations are tested： 0.02%, 1% and 3.5%.
