美国马利（Marley）产品介绍会

6月21日上午由艾斯比特制热电器(上海)有限公司主办的美国马利产品介绍会在北京新大都饭店举行。来自北京市的行业专家、设计人员100多人参加了会议。美国马利工程产品公司是一家专业从事制热电器、空气对流产品设计制造和销售的企业。公司产品通过了ISO9001的认证，可用于民用住宅、商业楼宇、体育场馆及工业等场所。该公司产品有蓄能式、移动式、地热电缆等系列，具有可分室控温、

A Soil Temperature Control System for Sapling Study in Alpine Region

A soil temperature control system was designed for sapling study in alpine region and tested in summer, 2009. The system consisted of a power switch, voltage regulator, microcomputer timer, safety relays, temperature control device, temperature sensors, heating cables, fireproofing plastic pipes (PVC), 108 heavy-duty plastic containers and seedlings. The heating cables were held in six 2-layer PVC frames with 25 cm wide, 320 cm long and 25 cm high and three 1-layer frames with 25 cm wide and 320 cm long for 15°C soil temperature treatment, half of the 2-layer frames were used for 20°C and 25°C soil temperature treatments, respectively. Each of the frames was installed at each of ditches with 30 cm wide, 330 cm long and 30 cm deep in size. 12 seedling containers with 20 cm top diameter, 18cm bottom diameter and 25 cm high were homogenously placed at each of the ditches, and spaces between the containers were filled with natural soil. The system was economic, and could increase soil temperatures obviously and uniformly, the maximal and minimal standard errors of soil temperatures were ±0.28 and ±0.05°C at 10cm depth in the containers within each of all the ditches. In the system, aboveground environment was natural, diurnal and monthly soil temperatures varied with changing air temperature, the research results may be better to know the eco-physiological and growth responses of alpine saplings/seedlings to soil warming than that in greenhouse, laboratory, infrared heat lamp and open top chamber.

The Design of TZ-2 High Voltage Pulse Modulator

There are a few assistant heating objects included electron cyclotron resonate heating （ ECRH ）. Two 500 kW gyrotrons introduced from Russia were operated to launch 1 MW energy. So two set of TZ-2 high voltage pulse modulators are needed.

Preparation of diamond/Cu microchannel heat sink by chemical vapor deposition

A Ti interlayer with thickness about 300 nm was sputtered on Cu microchannels, followed by an ultrasonic seeding with nanodiamond powders. Adherent diamond film with crystalline grains close to thermal equilibrium shape was tightly deposited by hot-filament chemical vapor deposition(HF-CVD). The nucleation and growth of diamond were investigated with micro-Raman spectroscope and field emission scanning electron microscope(FE-SEM) with energy dispersive X-ray detector(EDX). Results show that the nucleation density is found to be up to 1010 cm-2. The enhancement of the nucleation kinetics can be attributed to the nanometer rough Ti interlayer surface. An improved absorption of nanodiamond particles is found, which act as starting points for the diamond nucleation during HF-CVD process. Furthermore, finite element simulation was conducted to understand the thermal management properties of prepared diamond/Cu microchannel heat sink.

Hierarchically porous composite fabrics with ultrahigh metal–organic framework loading for zero-energy-consumption heat dissipation

The long-term safe operation of high-power equipment and integrated electronic devices requires efficient thermal management,which in turn increases the energy consumption further.Hence,the sustainable development of our society needs advanced thermal management with low,even zero,energy consumption.Harvesting water from the atmosphere,followed by moisture desorption to dissipate heat,is an efficient and feasible approach for zero-energy-consumption thermal management.However,current methods are limited by the low absorbance of water,low water vapor transmission rate(WVTR)and low stability,thus resulting in low thermal management capability.In this study,we report an innovative electrospinning method to process hierarchically porous metal–organic framework(MOF)composite fabrics with high-efficiency and zero-energy-consumption thermal management.The composite fabrics are highly loaded with MOF(75 wt%)and their WVTR value can be up to 3138 g m^(-2) d^(-1).The composite fabrics also exhibit stable microstructure and performance.Under a conventional environment(30℃,60%relative humidity),the composite fabrics adsorb water vapor for regeneration within 1.5 h to a saturated value Wsat of 0.614 g g^(-1),and a corresponding equivalent enthalpy of 1705.6 J g^(-1).In the thermal management tests,the composite fabrics show a strong cooling capability and significantly improve the performance of thermoelectric devices,portable storage devices and wireless chargers.These results suggest that hierarchically porous MOF composite fabrics are highly promising for thermal management of intermittent-operation electronic devices.

A Mechanical and Experimental Study on the Heat Loss of Solar Evacuated Tube

The experimental system of heat loss of all-glass evacuated solar collector tubes(evacuated tube) is firstly designed and constructed,which uses electric heater as thermal resource.The equilibrium temperatures are less than±1℃during the test.and the temperature differences of up/middle/low node in the tube are less than 1℃,3℃,and 7℃respectively.The heat loss of evacuated tube increases about 2.7%with vacuum state of 0.01--1 mPa,and it has the best performance at tube temperature of 20--280℃.The invalidation tube(>200 mPa) has the biggest heat loss that increases linearly with the tube temperature.The evacuated tubes with the vacuum of 0.01-1 mPa are suitable for most solar adsorption refrigeration.

Forced Convective Air Cooling from Electronic Component Arrays in a Parallel Plate Channel

This paper discusses air forced convection heat transfer from inline protruding elements arranged in eight rows. The streamwise and spanwise spacings between elements were varied using a splitter plate that can be positioned at three different modular configurations. A set of empirical formulas waspresented to correlate the experimental data for the design of air cooling systems. Arrays of components with one odd-size module have been tested also. Experimental results show that blocks near the entrance and behind the odd-size module have improved performance compared with uniform arrangements. Accordingly, temperature sensitive components are suggested to be arranged in these locations.