In this paper the method to calculate intangible quality cost is put forward for the first time based on the production and management characteristics of coal preparation plant. A model for assessment of quality manag...In this paper the method to calculate intangible quality cost is put forward for the first time based on the production and management characteristics of coal preparation plant. A model for assessment of quality management performance of coal preparation plant is established on the ground of quality cost. By using of CIMS integration environment the strategy to carry out the model and the application example are also offered. It provides a new and feasible way to assess performance quality management of coal preparation plant.展开更多
We aimed to develop a process technology for constructing a carbon-based micro-electromechanical system that does not require a high-temperature and high-energy process. A HOPG （highly oriented pyrolytic graphite） c...We aimed to develop a process technology for constructing a carbon-based micro-electromechanical system that does not require a high-temperature and high-energy process. A HOPG （highly oriented pyrolytic graphite） crystal microsheet was prepared by exfoliation. Cantilevers and doubly clamped beams were patterned using a photoresist. The HOPG microsheet was attached by using a tantalum layer. We fabricated cantilevers and a doubly clamped beam by controlling the thickness of the HOPG microsheet and then measured the first resonance frequency. The measurements suggest a need to improve the stiffness of the beam.展开更多
Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization...Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization of use of production resources. However, it is necessary to measure the productivity, so that the system of measurement and control of manufacturing processes are an element critical as to ensure greater visibility of the flow＇s restrictions, minimized when detected properly. In this case, the automation of factory＇s measurement process can effectively contribute to ensuring the effectiveness of the function control of a manufacturing system. It is important to consider that the automation of the system of measurement and control of manufacturing processes, of complex environment, is heavily dependent of IT tools applied directly in the interface computational between the operation systems and the corporate systems. This heavy reliance, if exploited technically properly, allows that automation of the system of measurement and control of production makes the access to time real of availability of manufacturing process＇s data, such as processing time and setup time that it can export to a specialist software in programming production, for example, feasible. In this paper, the automation of the system of measurement and control of production is approached, in order to identify the main possibilities of the design of an information system capable to integrate the flow of information in an environment internal on manufacturing organizations, with emphasis in the digital manufacturing paradigm.展开更多
We designed a novel core-suspended capillary fiber that the core was suspended in the air hole and close to the inner surface of the capillary, and experimentally demonstrated its fabrication technology. In addition, ...We designed a novel core-suspended capillary fiber that the core was suspended in the air hole and close to the inner surface of the capillary, and experimentally demonstrated its fabrication technology. In addition, a method for linking a single mode fiber and a core-suspended fiber was proposed based on splicing and tapering at the fusion point between the two fibers. By combining with the optical time domain reflectometer technology, we constructed a distributed gas sensor system to monitor greenhouse gas based on this novel fiber.展开更多
文摘In this paper the method to calculate intangible quality cost is put forward for the first time based on the production and management characteristics of coal preparation plant. A model for assessment of quality management performance of coal preparation plant is established on the ground of quality cost. By using of CIMS integration environment the strategy to carry out the model and the application example are also offered. It provides a new and feasible way to assess performance quality management of coal preparation plant.
文摘We aimed to develop a process technology for constructing a carbon-based micro-electromechanical system that does not require a high-temperature and high-energy process. A HOPG （highly oriented pyrolytic graphite） crystal microsheet was prepared by exfoliation. Cantilevers and doubly clamped beams were patterned using a photoresist. The HOPG microsheet was attached by using a tantalum layer. We fabricated cantilevers and a doubly clamped beam by controlling the thickness of the HOPG microsheet and then measured the first resonance frequency. The measurements suggest a need to improve the stiffness of the beam.
文摘Manufacturing system, with high level of complexity and with a mix of semi-repetitive and repetitive products, to become productive, should seek the standardization of products and processes to obtain the optimization of use of production resources. However, it is necessary to measure the productivity, so that the system of measurement and control of manufacturing processes are an element critical as to ensure greater visibility of the flow＇s restrictions, minimized when detected properly. In this case, the automation of factory＇s measurement process can effectively contribute to ensuring the effectiveness of the function control of a manufacturing system. It is important to consider that the automation of the system of measurement and control of manufacturing processes, of complex environment, is heavily dependent of IT tools applied directly in the interface computational between the operation systems and the corporate systems. This heavy reliance, if exploited technically properly, allows that automation of the system of measurement and control of production makes the access to time real of availability of manufacturing process＇s data, such as processing time and setup time that it can export to a specialist software in programming production, for example, feasible. In this paper, the automation of the system of measurement and control of production is approached, in order to identify the main possibilities of the design of an information system capable to integrate the flow of information in an environment internal on manufacturing organizations, with emphasis in the digital manufacturing paradigm.
基金This work was supported by the Key Laboratory Program for in-Fiber Integrated Optics of the Education Ministry of China, partially supported by the National Nature Science Foundation of China （No. 41174161） and by China Postdoctoral Science Foundation Grant （2013M531013）.
文摘We designed a novel core-suspended capillary fiber that the core was suspended in the air hole and close to the inner surface of the capillary, and experimentally demonstrated its fabrication technology. In addition, a method for linking a single mode fiber and a core-suspended fiber was proposed based on splicing and tapering at the fusion point between the two fibers. By combining with the optical time domain reflectometer technology, we constructed a distributed gas sensor system to monitor greenhouse gas based on this novel fiber.
