Si based single electron transistor (SET) is fabricated successfully on p type SIMOX substrate,based on electron beam (EB) lithography,reactive ion etching (RIE) and thermal oxidation.In particular,using thermal oxi...Si based single electron transistor (SET) is fabricated successfully on p type SIMOX substrate,based on electron beam (EB) lithography,reactive ion etching (RIE) and thermal oxidation.In particular,using thermal oxidation and etching off the oxide layer,a one dimensional Si quantum wire can be converted into several quantum dots inside quantum wire in connection with the source and drain regions.The differential conductance (d I ds /d V ds ) oscillations and the Coulomb staircases in the source drain current ( I ds ) are shown clearly dependent on the source drain voltage at 5 3K.The I ds V gs (gate voltage) oscillations are observed from the I ds V gs characteristics as a function of V gs at different temperatures and various values of V ds .For a SET whose total capacitance is about 9 16aF,the I ds V gs oscillations can be observed at 77K.展开更多
Benefiting from advances in feature technology for design and manufacture can not be expected before a formal methodology is established. This paper makes attempt to establish a definition formalism of machining featu...Benefiting from advances in feature technology for design and manufacture can not be expected before a formal methodology is established. This paper makes attempt to establish a definition formalism of machining features in design for manufacturability from two aspects: formal definition and manufacturability analysis. Some definitions for machining feature based upon the selection and sequencing of material removal operations for component in accordance with the design geometry are presented and a framework of feature based design for manufacturability is outlined correspondingly. The proposed scheme contributes to several aspects of feature based CAD/CAM integration, especially to encourage potentially a more generic approach to the automation of design.展开更多
[Objective] The aim was to improve part of auto-control system of aquatic seedling breeding and to lay foundation for highly-efficient and stable use of the sys- tem. [Method] The executive and drive modules of the au...[Objective] The aim was to improve part of auto-control system of aquatic seedling breeding and to lay foundation for highly-efficient and stable use of the sys- tem. [Method] The executive and drive modules of the auto-control system were im- proved, after which real-time monitor, data display and alarm modules were tested on time. [Result] In the test, for the improved system, stability and sensitivity were enhanced; different components matched better; transmitting electric resistanc6 was reduced. [Conclusion] The research provides references for auto-control of water temperature and dissolved oxygen, and faults clearing in aquatic seedling breeding.展开更多
Using the Java 2 enterprise edition (J2EE), the industry standard technique, a component and web-based manufacturing execution system (MES), is presented. It is considered to be open, modularized, distributed, configu...Using the Java 2 enterprise edition (J2EE), the industry standard technique, a component and web-based manufacturing execution system (MES), is presented. It is considered to be open, modularized, distributed, configurable, interoperable and maintainable. After introducing some core techniques of J2EE as the basic foundations of the proposed MES, this paper briefly analyzes the MES domain in manufacturing systems and constructs the abstract object and component model, and then establishes the MES architecture. This MES can be facilely integrated with other manufacturing applications. Finally, an example of integration with the enterprise resource planning (ERP) system is given.展开更多
We describe a post resolution-enhancement-technique verification method for use in manufacturing data flow. The goal of the method is to verify whether designs function as intended,or more precisely, whether the print...We describe a post resolution-enhancement-technique verification method for use in manufacturing data flow. The goal of the method is to verify whether designs function as intended,or more precisely, whether the printed images are consistent with the design intent. The process modeling is described for the model-based verifi cation method. The performance of the method is demonstrated by experiment.展开更多
In order to build a ceramic component by inkjet printing, the object must be fabricated through the interaction and solidification of drops, typically in the range of 10–100 p L. In order to achieve this goal, stable...In order to build a ceramic component by inkjet printing, the object must be fabricated through the interaction and solidification of drops, typically in the range of 10–100 p L. In order to achieve this goal, stable ceramic inks must be developed. These inks should satisfy specific rheological conditions that can be illustrated within a parameter space defined by the Reynolds and Weber numbers. Printed drops initially deform on impact with a surface by dynamic dissipative processes, but then spread to an equilibrium shape defined by capillarity. We can identify the processes by which these drops interact to form linear features during printing, but there is a poorer level of understanding as to how 2D and 3D structures form. The stability of 2D sheets of ink appears to be possible over a more limited range of process conditions that is seen with the formation of lines. In most cases, the ink solidifies through evaporation and there is a need to control the drying process to eliminate the "coffee ring" defect. Despite these uncertainties, there have been a large number of reports on the successful use of inkjet printing for the manufacture of small ceramic components from a number of different ceramics. This technique offers good prospects as a future manufacturing technique. This review identifies potential areas for future research to improve our understanding of this manufacturing method.展开更多
This paper compares Chinese, Korean, and Japanese shipyard production technology. Development in the world shipbuilding over recent years has influenced focus areas related to shipyard manufacturing technologies and p...This paper compares Chinese, Korean, and Japanese shipyard production technology. Development in the world shipbuilding over recent years has influenced focus areas related to shipyard manufacturing technologies and product performance. Software systems, information technology, production technology, and local challenges of shipyards are compared with shipbuilding outputs among these three countries. Various technologies developments, shipyard production and the problems in Chinese, Japanese, and Korean shipyards are discussed respectively. Finally, future areas of research are pointed out.展开更多
With the development of manufacture technology, the multi-level cell(MLC)technique dramatically increases the storage density of NAND flash memory. As the result,cell-to-cell interference(CCI) becomes more serious and...With the development of manufacture technology, the multi-level cell(MLC)technique dramatically increases the storage density of NAND flash memory. As the result,cell-to-cell interference(CCI) becomes more serious and hence causes an increase in the raw bit error rate of data stored in the cells.Recently, low-density parity-check(LDPC)codes have appeared to be a promising solution to combat the interference of MLC NAND flash memory. However, the decoding complexity of the sum-product algorithm(SPA) is extremely high. In this paper, to improve the accuracy of the log likelihood ratio(LLR) information of each bit in each NAND flash memory cell, we adopt a non-uniform detection(N-UD) which uses the average maximum mutual information to determine the value of the soft-decision reference voltages.Furthermore, with an aim to reduce the decoding complexity and improve the decoding performance, we propose a modified soft reliabilitybased iterative majority-logic decoding(MSRBI-MLGD) algorithm, which uses a non-uniform quantizer based on power function to decode LDPC codes. Simulation results show that our design can offer a desirable trade-off between the performance and complexity for high-column-weight LDPC-coded MLC NAND flash memory.展开更多
Theoretical analyses show that the variation of wall thickness is in direct proportion to outer-diameter, inter-diameter, and (1+R_s)^(1/2) (Rs is sectional increase ratio of tube), the theoretical calculated results ...Theoretical analyses show that the variation of wall thickness is in direct proportion to outer-diameter, inter-diameter, and (1+R_s)^(1/2) (Rs is sectional increase ratio of tube), the theoretical calculated results of wall thickness during tube dieless upsetting are very approximate to the experimental one. As the width of deformation field increases, both the variation of wall thickness and the derivative of wall thickness variation to width of deformation field (to/tf) reduce.展开更多
To solve the problem of advanced digital manufacturing technology in the practical application, a knowledge engineering technology was introduced into the computer numerical control(CNC) programming. The knowledge acq...To solve the problem of advanced digital manufacturing technology in the practical application, a knowledge engineering technology was introduced into the computer numerical control(CNC) programming. The knowledge acquisition, knowledge representation and reasoning used in CNC programming were researched. The CNC programming system functional architecture of impeller parts based on knowledge based engineering(KBE) was constructed. The structural model of the general knowledge-based system(KBS) was also constructed. The KBS of CNC programming system was established through synthesizing database technology and knowledge base theory. And in the context of corporate needs, based on the knowledge-driven manufacturing platform(i.e. UG CAD/CAM), VC++6.0 and UG/Open, the KBS and UG CAD/CAM were integrated seamlessly and the intelligent CNC programming KBE system for the impeller parts was developed by integrating KBE and UG CAD/CAM system. A method to establish standard process templates was proposed, so as to develop the intelligent CNC programming system in which CNC machining process and process parameters were standardized by using this KBE system. For the impeller parts processing, the method applied in the development of the prototype system is proven to be viable, feasible and practical.展开更多
Additive manufacturing technology has been developed in Xi＇ an Jiaotong University for almost 20 years. Up to now~ it is still attracting the attentions of the researchers or manufacturers all over the world. Some in...Additive manufacturing technology has been developed in Xi＇ an Jiaotong University for almost 20 years. Up to now~ it is still attracting the attentions of the researchers or manufacturers all over the world. Some in- novative processes and frontier application research are all being conducted here to catch up with the new develop- ment of this technology. In the paper, newly developed processes, such as ultraviolet-light emitting diode （UV- LED） stereolithography, ceramic stereolithography, and direct metal forming, were described. Some results of the frontier application researches, such as indirect fabrication of ceramic casting mould, wind-tunnel-testing models, photonic crystals and metamatcrials, were also briefly reviewed.展开更多
In order to obtain satisfactory mechanical properties for the cam used in high-power ship diesel engines, a new quenching technology was proposed by designing a two-stage quenching process with an alkaline bath as the...In order to obtain satisfactory mechanical properties for the cam used in high-power ship diesel engines, a new quenching technology was proposed by designing a two-stage quenching process with an alkaline bath as the quenching medium. To demonstrate the effectiveness of the proposed new quenching technology, both numerical analysis and experimental study were performed. The new quenching technology was analyzed using finite element method. The combined effects of the temperature, stress and microstructure fields were investigated considering nonlinear material properties. Finally, an experimental study was performed to verify the effectiveness of the proposed new quenching technology. The numerical results show that internal stress is affected by both thermal stress and transformation stress. In addition, the direction of the internal stress is changed several times due to thermal interaction and microstructure evolution during the quenching process. The experimental results show that the proposed new quenching technology significantly improves the mechanical properties and microstructures of the cam. The tensile strength, the impact resistance and the hardness value of the cam by the proposed new quenching technology are improved by 4.3%, 8.9% and 3.5% compared with those by the traditional quenching technology. Moreover, the residual stress and cam shape deformation are reduced by 40.0% and 48.9% respectively for the cam manufactured by the new quenching technology.展开更多
Additive manufacturing technologies enable the production of parts by successively adding layers. In powder-based technologies, each powder layer is selectively solidified following the respective cross-section of the...Additive manufacturing technologies enable the production of parts by successively adding layers. In powder-based technologies, each powder layer is selectively solidified following the respective cross-section of the parts either by the application of high-energy radiation or by the selective deposition of binder. By repeating the steps of layer deposition and selective solidification, parts are fabricated. The layer-wise build-up and the ambient conditions lead to warpage of the parts due to the temporarily and locally uneven distribution of shrinkage throughout the part. This leads to deviations in shape and dimension. The development of these technologies fosters a change fi＇om prototyping to manufacturing applications, As a consequence, higher standards regarding the shape and dimensional accuracy are required. Therefore, new strategies to minimize the resulting deformations are necessary to reduce rejects and widen the range of applications of the described technologies. In this paper, an empirical, a knowledge-based and a simulative approach for warpage compensation are introduced. They are all based on the pre-deformation of the digital 3D part geometry inverse to the expected deformation during manufacturing. The aim of the research is the development of a comprehensive method that enables users to improve their part-quality by supporting the pre-deformation process. Contrary to existing work, this method should not be process-specific but cover a wide range of additive manufacturing techniques. Typical forms of deformation of the processes laser sintering, laser beam melting and 3D printing （powder-binder） are presented and compensation strategies are disenssed. Finally, an outlook on the ongoing research is given.展开更多
Additive manufacturing and 3D printing tech-nology have been developing rapidly in the last 30 years, and indicate great potential for future development. The promising future of this technology makes its impact on tr...Additive manufacturing and 3D printing tech-nology have been developing rapidly in the last 30 years, and indicate great potential for future development. The promising future of this technology makes its impact on traditional industry unpredictable. 3D printing will propel the revolution of fabrication modes forward, and bring in a new era for customized fabrication by realizing the five "any"s: use of almost any material to fabricate any part, in any quantity and any location, for any industrial field. Innovations in material, design, and fabrication processes will be inspired by the merging of 3D-printing technology and processes with traditional manufacturing processes. Finally, 3D printing will become as valuable for manufacturing industries as equivalent and subtractive manufacturing processes.展开更多
文摘Si based single electron transistor (SET) is fabricated successfully on p type SIMOX substrate,based on electron beam (EB) lithography,reactive ion etching (RIE) and thermal oxidation.In particular,using thermal oxidation and etching off the oxide layer,a one dimensional Si quantum wire can be converted into several quantum dots inside quantum wire in connection with the source and drain regions.The differential conductance (d I ds /d V ds ) oscillations and the Coulomb staircases in the source drain current ( I ds ) are shown clearly dependent on the source drain voltage at 5 3K.The I ds V gs (gate voltage) oscillations are observed from the I ds V gs characteristics as a function of V gs at different temperatures and various values of V ds .For a SET whose total capacitance is about 9 16aF,the I ds V gs oscillations can be observed at 77K.
文摘Benefiting from advances in feature technology for design and manufacture can not be expected before a formal methodology is established. This paper makes attempt to establish a definition formalism of machining features in design for manufacturability from two aspects: formal definition and manufacturability analysis. Some definitions for machining feature based upon the selection and sequencing of material removal operations for component in accordance with the design geometry are presented and a framework of feature based design for manufacturability is outlined correspondingly. The proposed scheme contributes to several aspects of feature based CAD/CAM integration, especially to encourage potentially a more generic approach to the automation of design.
文摘[Objective] The aim was to improve part of auto-control system of aquatic seedling breeding and to lay foundation for highly-efficient and stable use of the sys- tem. [Method] The executive and drive modules of the auto-control system were im- proved, after which real-time monitor, data display and alarm modules were tested on time. [Result] In the test, for the improved system, stability and sensitivity were enhanced; different components matched better; transmitting electric resistanc6 was reduced. [Conclusion] The research provides references for auto-control of water temperature and dissolved oxygen, and faults clearing in aquatic seedling breeding.
文摘Using the Java 2 enterprise edition (J2EE), the industry standard technique, a component and web-based manufacturing execution system (MES), is presented. It is considered to be open, modularized, distributed, configurable, interoperable and maintainable. After introducing some core techniques of J2EE as the basic foundations of the proposed MES, this paper briefly analyzes the MES domain in manufacturing systems and constructs the abstract object and component model, and then establishes the MES architecture. This MES can be facilely integrated with other manufacturing applications. Finally, an example of integration with the enterprise resource planning (ERP) system is given.
文摘We describe a post resolution-enhancement-technique verification method for use in manufacturing data flow. The goal of the method is to verify whether designs function as intended,or more precisely, whether the printed images are consistent with the design intent. The process modeling is described for the model-based verifi cation method. The performance of the method is demonstrated by experiment.
文摘In order to build a ceramic component by inkjet printing, the object must be fabricated through the interaction and solidification of drops, typically in the range of 10–100 p L. In order to achieve this goal, stable ceramic inks must be developed. These inks should satisfy specific rheological conditions that can be illustrated within a parameter space defined by the Reynolds and Weber numbers. Printed drops initially deform on impact with a surface by dynamic dissipative processes, but then spread to an equilibrium shape defined by capillarity. We can identify the processes by which these drops interact to form linear features during printing, but there is a poorer level of understanding as to how 2D and 3D structures form. The stability of 2D sheets of ink appears to be possible over a more limited range of process conditions that is seen with the formation of lines. In most cases, the ink solidifies through evaporation and there is a need to control the drying process to eliminate the "coffee ring" defect. Despite these uncertainties, there have been a large number of reports on the successful use of inkjet printing for the manufacture of small ceramic components from a number of different ceramics. This technique offers good prospects as a future manufacturing technique. This review identifies potential areas for future research to improve our understanding of this manufacturing method.
文摘This paper compares Chinese, Korean, and Japanese shipyard production technology. Development in the world shipbuilding over recent years has influenced focus areas related to shipyard manufacturing technologies and product performance. Software systems, information technology, production technology, and local challenges of shipyards are compared with shipbuilding outputs among these three countries. Various technologies developments, shipyard production and the problems in Chinese, Japanese, and Korean shipyards are discussed respectively. Finally, future areas of research are pointed out.
基金supported in part by the NSF of China (61471131, 61771149, 61501126)NSF of Guangdong Province 2016A030310337+1 种基金the open research fund of National Mobile Communications Research Laboratory, Southeast University (No. 2018D02)the Guangdong Province Universities and Colleges Pearl River Scholar Funded Scheme (2017-ZJ022)
文摘With the development of manufacture technology, the multi-level cell(MLC)technique dramatically increases the storage density of NAND flash memory. As the result,cell-to-cell interference(CCI) becomes more serious and hence causes an increase in the raw bit error rate of data stored in the cells.Recently, low-density parity-check(LDPC)codes have appeared to be a promising solution to combat the interference of MLC NAND flash memory. However, the decoding complexity of the sum-product algorithm(SPA) is extremely high. In this paper, to improve the accuracy of the log likelihood ratio(LLR) information of each bit in each NAND flash memory cell, we adopt a non-uniform detection(N-UD) which uses the average maximum mutual information to determine the value of the soft-decision reference voltages.Furthermore, with an aim to reduce the decoding complexity and improve the decoding performance, we propose a modified soft reliabilitybased iterative majority-logic decoding(MSRBI-MLGD) algorithm, which uses a non-uniform quantizer based on power function to decode LDPC codes. Simulation results show that our design can offer a desirable trade-off between the performance and complexity for high-column-weight LDPC-coded MLC NAND flash memory.
基金Sponsored by Ministry of Education of China and Natural Science Foundation of Liaoning Province
文摘Theoretical analyses show that the variation of wall thickness is in direct proportion to outer-diameter, inter-diameter, and (1+R_s)^(1/2) (Rs is sectional increase ratio of tube), the theoretical calculated results of wall thickness during tube dieless upsetting are very approximate to the experimental one. As the width of deformation field increases, both the variation of wall thickness and the derivative of wall thickness variation to width of deformation field (to/tf) reduce.
基金Project(12ZT14)supported by the Natural Science Foundation of Shanghai Municipal Education Commission,China
文摘To solve the problem of advanced digital manufacturing technology in the practical application, a knowledge engineering technology was introduced into the computer numerical control(CNC) programming. The knowledge acquisition, knowledge representation and reasoning used in CNC programming were researched. The CNC programming system functional architecture of impeller parts based on knowledge based engineering(KBE) was constructed. The structural model of the general knowledge-based system(KBS) was also constructed. The KBS of CNC programming system was established through synthesizing database technology and knowledge base theory. And in the context of corporate needs, based on the knowledge-driven manufacturing platform(i.e. UG CAD/CAM), VC++6.0 and UG/Open, the KBS and UG CAD/CAM were integrated seamlessly and the intelligent CNC programming KBE system for the impeller parts was developed by integrating KBE and UG CAD/CAM system. A method to establish standard process templates was proposed, so as to develop the intelligent CNC programming system in which CNC machining process and process parameters were standardized by using this KBE system. For the impeller parts processing, the method applied in the development of the prototype system is proven to be viable, feasible and practical.
文摘Additive manufacturing technology has been developed in Xi＇ an Jiaotong University for almost 20 years. Up to now~ it is still attracting the attentions of the researchers or manufacturers all over the world. Some in- novative processes and frontier application research are all being conducted here to catch up with the new develop- ment of this technology. In the paper, newly developed processes, such as ultraviolet-light emitting diode （UV- LED） stereolithography, ceramic stereolithography, and direct metal forming, were described. Some results of the frontier application researches, such as indirect fabrication of ceramic casting mould, wind-tunnel-testing models, photonic crystals and metamatcrials, were also briefly reviewed.
基金Project(50875268) supported by the National Natural Science Foundation of China Project(CSTC2008AB3057) supported by Foundation of Chongqing Science and Technology Commission, China+1 种基金 Project(108107) supported by the Key Project of Ministry of Education of China Project(50925518) supported by the National Science Fund for Distinguished Young Scholars
文摘In order to obtain satisfactory mechanical properties for the cam used in high-power ship diesel engines, a new quenching technology was proposed by designing a two-stage quenching process with an alkaline bath as the quenching medium. To demonstrate the effectiveness of the proposed new quenching technology, both numerical analysis and experimental study were performed. The new quenching technology was analyzed using finite element method. The combined effects of the temperature, stress and microstructure fields were investigated considering nonlinear material properties. Finally, an experimental study was performed to verify the effectiveness of the proposed new quenching technology. The numerical results show that internal stress is affected by both thermal stress and transformation stress. In addition, the direction of the internal stress is changed several times due to thermal interaction and microstructure evolution during the quenching process. The experimental results show that the proposed new quenching technology significantly improves the mechanical properties and microstructures of the cam. The tensile strength, the impact resistance and the hardness value of the cam by the proposed new quenching technology are improved by 4.3%, 8.9% and 3.5% compared with those by the traditional quenching technology. Moreover, the residual stress and cam shape deformation are reduced by 40.0% and 48.9% respectively for the cam manufactured by the new quenching technology.
文摘Additive manufacturing technologies enable the production of parts by successively adding layers. In powder-based technologies, each powder layer is selectively solidified following the respective cross-section of the parts either by the application of high-energy radiation or by the selective deposition of binder. By repeating the steps of layer deposition and selective solidification, parts are fabricated. The layer-wise build-up and the ambient conditions lead to warpage of the parts due to the temporarily and locally uneven distribution of shrinkage throughout the part. This leads to deviations in shape and dimension. The development of these technologies fosters a change fi＇om prototyping to manufacturing applications, As a consequence, higher standards regarding the shape and dimensional accuracy are required. Therefore, new strategies to minimize the resulting deformations are necessary to reduce rejects and widen the range of applications of the described technologies. In this paper, an empirical, a knowledge-based and a simulative approach for warpage compensation are introduced. They are all based on the pre-deformation of the digital 3D part geometry inverse to the expected deformation during manufacturing. The aim of the research is the development of a comprehensive method that enables users to improve their part-quality by supporting the pre-deformation process. Contrary to existing work, this method should not be process-specific but cover a wide range of additive manufacturing techniques. Typical forms of deformation of the processes laser sintering, laser beam melting and 3D printing （powder-binder） are presented and compensation strategies are disenssed. Finally, an outlook on the ongoing research is given.
文摘Additive manufacturing and 3D printing tech-nology have been developing rapidly in the last 30 years, and indicate great potential for future development. The promising future of this technology makes its impact on traditional industry unpredictable. 3D printing will propel the revolution of fabrication modes forward, and bring in a new era for customized fabrication by realizing the five "any"s: use of almost any material to fabricate any part, in any quantity and any location, for any industrial field. Innovations in material, design, and fabrication processes will be inspired by the merging of 3D-printing technology and processes with traditional manufacturing processes. Finally, 3D printing will become as valuable for manufacturing industries as equivalent and subtractive manufacturing processes.
