To improve the ablation resistance of carbon/carbon(C/C)composites,a SiC/ZrC-ZrB2 double layer coating was fabricated by pack cementation and slurry-sintering method.The ablation resistance of the SiC/ZrC-ZrB2 coating...To improve the ablation resistance of carbon/carbon(C/C)composites,a SiC/ZrC-ZrB2 double layer coating was fabricated by pack cementation and slurry-sintering method.The ablation resistance of the SiC/ZrC-ZrB2 coating was tested under plasma flame above 2300°C.The results indicate that the SiC/ZrC-ZrB2 double layer coating exhibits superior ablation resistance than the ZrC-ZrB2 single layer coating.After being ablated under the plasma flame for 20 s,the mass and linear ablation rates of the ZrC-ZrB2 coating are 0.89 mg/s and 15.3μm/s,while those for SiC/ZrC-ZrB2 coating are 0.09 mg/s and 24.15μm/s,respectively.During ablation,the SiC inner layer can generate SiO2 glass and result in the formation of ZrO2-SiO2 molten film.Compared with the ZrO2 molten film formed on the ZrC-ZrB2 coating surface,the ZrO2-SiO2 molten film with lower oxygen diffusion rate and viscosity enables the SiC/ZrC-ZrB2 coating to have better self-healing ability.Therefore,the enhanced ablation resistance of the SiC/ZrC-ZrB2 coating can be attributed to the formation of dense ZrO2-SiO2 molten film under the plasma flame.展开更多
Industrial spent MoSi_(2)-based materials were used to fabricate oxidation-resistant coatings on molybdenum via slurry painting in air. The microstructure, phase constituent and high-temperature oxidation behaviors of...Industrial spent MoSi_(2)-based materials were used to fabricate oxidation-resistant coatings on molybdenum via slurry painting in air. The microstructure, phase constituent and high-temperature oxidation behaviors of the coatings at 1500 ℃ were explored. The results show that the bonding layer is generated in the coatings after sintering,which strengthens the metallurgical combination between the coating and the substrate because of the formation of diffusion layers. Rare cracks appear in the coating using pure MoSi_(2)(PM coating) while the coating using spent MoSi_(2)(SM coating) is free of cracks due to decreased thermal expansion mismatch. After oxidation, the oxide scale of PM coating possesses large-sized pores while a relatively dense oxide scale is acquired by SM coating. Compared with PM coating, thinner glassy oxide scale with lower mass gain is obtained by SM coating, exhibiting better anti-oxidation properties at 1500 ℃.展开更多
基金Project(51304249)supported by the National Natural Science Foundation of ChinaProject(14JJ3023)supported by the Science Foundation of Hunan Province,China。
文摘To improve the ablation resistance of carbon/carbon(C/C)composites,a SiC/ZrC-ZrB2 double layer coating was fabricated by pack cementation and slurry-sintering method.The ablation resistance of the SiC/ZrC-ZrB2 coating was tested under plasma flame above 2300°C.The results indicate that the SiC/ZrC-ZrB2 double layer coating exhibits superior ablation resistance than the ZrC-ZrB2 single layer coating.After being ablated under the plasma flame for 20 s,the mass and linear ablation rates of the ZrC-ZrB2 coating are 0.89 mg/s and 15.3μm/s,while those for SiC/ZrC-ZrB2 coating are 0.09 mg/s and 24.15μm/s,respectively.During ablation,the SiC inner layer can generate SiO2 glass and result in the formation of ZrO2-SiO2 molten film.Compared with the ZrO2 molten film formed on the ZrC-ZrB2 coating surface,the ZrO2-SiO2 molten film with lower oxygen diffusion rate and viscosity enables the SiC/ZrC-ZrB2 coating to have better self-healing ability.Therefore,the enhanced ablation resistance of the SiC/ZrC-ZrB2 coating can be attributed to the formation of dense ZrO2-SiO2 molten film under the plasma flame.
基金financially supported by the National Natural Science Foundation of China (Nos. 51874305, 51972338)Graduate Research and Innovation Projects of Jiangsu Province, China (No. KYCX21_22413)。
文摘Industrial spent MoSi_(2)-based materials were used to fabricate oxidation-resistant coatings on molybdenum via slurry painting in air. The microstructure, phase constituent and high-temperature oxidation behaviors of the coatings at 1500 ℃ were explored. The results show that the bonding layer is generated in the coatings after sintering,which strengthens the metallurgical combination between the coating and the substrate because of the formation of diffusion layers. Rare cracks appear in the coating using pure MoSi_(2)(PM coating) while the coating using spent MoSi_(2)(SM coating) is free of cracks due to decreased thermal expansion mismatch. After oxidation, the oxide scale of PM coating possesses large-sized pores while a relatively dense oxide scale is acquired by SM coating. Compared with PM coating, thinner glassy oxide scale with lower mass gain is obtained by SM coating, exhibiting better anti-oxidation properties at 1500 ℃.
