It is difficult to directly electroplate Al on Mg alloys. The effects of pretreatment parameters on the corrosion resistance of films obtained on AZ31 Mg alloy surface were studied by using potentiodynamic polarizatio...It is difficult to directly electroplate Al on Mg alloys. The effects of pretreatment parameters on the corrosion resistance of films obtained on AZ31 Mg alloy surface were studied by using potentiodynamic polarization curves, to produce a compact interfacial layer as zinc-immersion deposition. After the substrate was pretreated under optimized conditions, aluminum was electrodeposited on AZ31 from TMPAC-AlCl3 room temperature ionic liquids. The depositions were characterized by scanning electron microscope equipped with energy dispersion X-ray. The results show that the traditional pretreatment of Mg alloys was successfully used for the Al-electroplating process from TMPAC-AlCl3 ionic liquids. The entire procedure includes alkaline cleaning, chemical pickling, surface activation （400 mL/L HF acid, 10 min）, zinc-immersion （20 min） and anhydrous treatment. A relatively compact zinc-immersion film was prepared on the substrate surface. A silvery-colored satin aluminum deposition was obtained on AZ31 from TMPAC-AlCl3 using direct current plating.展开更多
Ion chromatography （IC） is a suitable analytical method for the determination of anions. As analytical methods for the halogen compounds in flue gas, those of bromine compound, fluorine compound, chlorine （Cl2） an...Ion chromatography （IC） is a suitable analytical method for the determination of anions. As analytical methods for the halogen compounds in flue gas, those of bromine compound, fluorine compound, chlorine （Cl2） and hydrogen chloride （HCI） are listed in JIS. However, IC has not been adopted in JIS except for HCI and C12. Because the carbon dioxide in flue gas is absorbed in a 0.1 M sodium hydroxide solution as an absorber, it is interfered with the measurement of F^- and Cl^- ions. This paper describes the development of the pretreatment equipment for the flue gas analysis by IC, and its applications to real flue gas analysis. The F^-, Cl^-, Br^- and SO4^2- in the absorbing solution can be clearly separated by IC using the pretreatment equipment. The halogen compounds and sulfur oxides in flue gas can be simultaneously determined by IC.展开更多
文摘It is difficult to directly electroplate Al on Mg alloys. The effects of pretreatment parameters on the corrosion resistance of films obtained on AZ31 Mg alloy surface were studied by using potentiodynamic polarization curves, to produce a compact interfacial layer as zinc-immersion deposition. After the substrate was pretreated under optimized conditions, aluminum was electrodeposited on AZ31 from TMPAC-AlCl3 room temperature ionic liquids. The depositions were characterized by scanning electron microscope equipped with energy dispersion X-ray. The results show that the traditional pretreatment of Mg alloys was successfully used for the Al-electroplating process from TMPAC-AlCl3 ionic liquids. The entire procedure includes alkaline cleaning, chemical pickling, surface activation （400 mL/L HF acid, 10 min）, zinc-immersion （20 min） and anhydrous treatment. A relatively compact zinc-immersion film was prepared on the substrate surface. A silvery-colored satin aluminum deposition was obtained on AZ31 from TMPAC-AlCl3 using direct current plating.
文摘Ion chromatography （IC） is a suitable analytical method for the determination of anions. As analytical methods for the halogen compounds in flue gas, those of bromine compound, fluorine compound, chlorine （Cl2） and hydrogen chloride （HCI） are listed in JIS. However, IC has not been adopted in JIS except for HCI and C12. Because the carbon dioxide in flue gas is absorbed in a 0.1 M sodium hydroxide solution as an absorber, it is interfered with the measurement of F^- and Cl^- ions. This paper describes the development of the pretreatment equipment for the flue gas analysis by IC, and its applications to real flue gas analysis. The F^-, Cl^-, Br^- and SO4^2- in the absorbing solution can be clearly separated by IC using the pretreatment equipment. The halogen compounds and sulfur oxides in flue gas can be simultaneously determined by IC.
