期刊文献+
共找到4篇文章
< 1 >
每页显示 20 50 100
基于离散元法的煤系土剪切带演化宏细观分析 被引量:4
1
作者 张榜 丰浩然 +2 位作者 习明星 吴灿 张鸿 《公路交通科技》 CAS CSCD 北大核心 2020年第12期40-46,69,共8页
剪切带广泛存在于土质边坡的失稳破坏中,煤系土剪切带形成原因比较复杂。为了揭示煤系土的宏观变形破坏机理,就有必要从细观角度分析煤系土剪切带的形成和演化规律。利用离散元法建立了煤系土三轴试验的三维数值计算模型,对煤系土剪切... 剪切带广泛存在于土质边坡的失稳破坏中,煤系土剪切带形成原因比较复杂。为了揭示煤系土的宏观变形破坏机理,就有必要从细观角度分析煤系土剪切带的形成和演化规律。利用离散元法建立了煤系土三轴试验的三维数值计算模型,对煤系土剪切带的形成和发展进行了三维仿真模拟,得到了煤系土的宏观力学响应,并从细观角度分析了煤系土剪切带演化过程中的体积分数、配位数、颗粒旋转及力链的变化规律。结果表明:试件峰值应力之后,剪切带内颗粒体积分数一直处于下降状态,孔隙率大于剪切带外,煤系土剪切带的形成是剪胀现象产生的重要因素;试件通过颗粒相互旋转,剪切带内颗粒配位数降低,颗粒接触减少、孔隙率增加,试样强度下降,颗粒旋转是煤系土剪切带形成的主要原因;颗粒力链结构经历了由环状向扁平状转换,加载后期颗粒力链两头较密较粗,中间部分力链变得稀疏。计算发现:力链能反映复杂颗粒运动的宏观力学性能,力链的粗细、位置变化、密集程度是颗粒体系在加载时受力变化直观的显现,可为颗粒宏细观受力机理分析提供理论依据。 展开更多
关键词 道路工程 剪切带演化 离散元方法 煤系土 力链结构 宏细观分析
下载PDF
平面应变条件下不同裂隙方向原状膨胀土变形破坏性状与剪切带演化特征 被引量:2
2
作者 高志傲 孔令伟 +2 位作者 王双娇 刘炳恒 芦剑锋 《岩土力学》 EI CAS CSCD 北大核心 2023年第9期2495-2508,共14页
富含裂隙是膨胀土的重要特性之一,原生裂隙以及受力过程中的裂隙扩展对土的力学行为影响显著。为了调查裂隙对膨胀土的变形规律与破坏模式的影响,借助改进型真三轴仪,对不同原生裂隙主方向角的原状膨胀土(I型裂隙试样长轴垂直优势裂隙... 富含裂隙是膨胀土的重要特性之一,原生裂隙以及受力过程中的裂隙扩展对土的力学行为影响显著。为了调查裂隙对膨胀土的变形规律与破坏模式的影响,借助改进型真三轴仪,对不同原生裂隙主方向角的原状膨胀土(I型裂隙试样长轴垂直优势裂隙方向、II型裂隙试样长轴45°斜交优势裂隙方向、III型裂隙试样长轴平行优势裂隙方向),开展固结排水平面应变剪切试验,并利用数字图像相关(digital image correlation,简称DIC)技术分析变形规律,重点研究裂隙影响的变形局部化特征。结果表明:同一围压作用时,II型裂隙试样的峰值应力最小,应力-应变曲线呈应变软化型,其破坏类型为滑动破坏;I型裂隙试样峰值应力最大,且I型裂隙试样与III型裂隙试样的应力-应变曲线呈应变硬化型。I型裂隙试样的破坏类型为压缩剪切破坏,III型裂隙试样的破坏类型随围压不同而存在差异。同一围压作用下,I型裂隙试样产生的剪切带倾角较其他裂隙类型样品小,且基本不随围压变化。II型裂隙试样的剪切带沿原生裂隙面发育形成,其倾角大小随围压变化并无明显规律,围压影响II型裂隙土试样剪切带发育的数量。对于III型裂隙试样,围压影响剪切带发育类型,且随着围压增大,主剪切带倾角减小。利用Roscoe理论得到不同裂隙方向土样的剪切带倾角大小与试样实际破坏时剪切带的倾角较为符合。该试验为研究裂隙性膨胀土力学特征各向异性奠定了基础。 展开更多
关键词 膨胀土裂隙性 平面应变试验 数字图像相关技术 剪切带演化
下载PDF
脉岩对花岗岩体含金剪切带演化的控制作用─—以Val—d'Or地区阿比提比绿岩带中Bourlamaque岩体为例
3
作者 任云生 《世界地质》 CAS CSCD 1994年第4期52-60,共9页
花岗岩体中与剪切带有关的含金石英脉与镁铁质脉岩密切相关,脉岩对剪切带的分布、方向及运动学机制都有着显著的控制作用。Val—d'Or地区Bourlamaque岩休中出露若干条有经济意义的含金剪切带,其中大多数沿闪长质脉... 花岗岩体中与剪切带有关的含金石英脉与镁铁质脉岩密切相关,脉岩对剪切带的分布、方向及运动学机制都有着显著的控制作用。Val—d'Or地区Bourlamaque岩休中出露若干条有经济意义的含金剪切带,其中大多数沿闪长质脉岩分布或叠加于闪长质脉岩之上。该区所有矿床都由赋存于斜冲断层内的石英—电气石—黄铁矿脉组成,这些脉的走向、倾向、滑移方向变化较大,矿脉的几何形态和运动学机制比在变形均一侵入体中所预想的简单共轭型式要复杂得多。Bourlamaque岩体外类似剪切带显示的北向性挤压与岩体内剪切带的应力张量一致,说明闪长质脉岩对岩体内复杂的剪切带和矿脉起了显著的控制作用。这些脉岩在后期变形中作为活化的薄弱层,进一步表明非均质薄弱层在剪切带形成演化过程中的重要作用。矿体的倾伏方向与矿体沿剪切带的滑移方向在空间上具有一定的几何关系:二者常常垂直或相互平行。因此勘探初期即可预测矿体的倾伏方向。由于矿脉沿剪切带活化层的滑移方向受应力大小及有关的薄弱层控制,因此利用充分资料,通过断层滑移分析方法,不仅可计算出控制参数,还可预测任一方向活化层的滑移方向。 展开更多
关键词 花岗岩 岩体 含金 脉岩 剪切带演化 控制作用
下载PDF
Magnesite and talc origin in the sequence of geodynamic events in Veporicum, Inner Western Carpathians, Slovakia 被引量:2
4
作者 Zoltán NMETH Walter PROCHASKA +4 位作者 Martin RADVANEC Martin KOV■IK Ján MADARAS Peter KOD■RA L'ubomír HRA■KO 《岩石学报》 SCIE EI CAS CSCD 北大核心 2004年第4期837-854,共18页
This paper summarizes recent data about magnesite and talc genesis in Carboniferous host rocks of Western Carpathians (Slovakia) , which occur in two distinct belts in tectonic superunit Veporicum and its contact zone... This paper summarizes recent data about magnesite and talc genesis in Carboniferous host rocks of Western Carpathians (Slovakia) , which occur in two distinct belts in tectonic superunit Veporicum and its contact zone with Gemericum. The northern Sinec magnesite and talc belt (with main deposits Kokava, Sinec, Samo, Hnust'a-Mutnik) contains economic accummulation of magnesite and talc, while in the southern Ochtina belt ( main deposits in Dubrava massif-Dubrava, Mikova, Jedl'ovec; Lubenik, Ochtina, Kosice-Bankov, Banisko, Medvedia) the magnesite is dominating.The magnesite genesis by successive replacement of Carboniferous calcite to dolomite and magnesite during metamorphic process Ml (northern belt 280-400℃; , southern belt 370-420℃: ; Radvanec & Prochaska, 2001; Kodera & Radvanec, 2002) , being supplied by Mg from Permoscythian evaporitic bittern brines, relates to Variscan post-collisional (post-VD) evolution. The extensional tectonics and the high heat flow facilitated the generation of a hydrothermal system.The time-separated later metamorphic and sourcely different fluid flow event (M2; 1. c. ) produced talc. Tectonic, microtectonic, metamorphic and geochronological data relate the talc origin with the Alpine Upper Cretaceous (88-84 Ma; Maluski in Kovacik et al. , 1996) tectonothermal event AD2. This event, being the consequence of Alpine collisional ( AD1 ) crustal thickening and metamorphic core complex origin, meant regional extension and pervasive fluid flow of open system in crustal discontinuities. This process was prominent in the northern belt ( Sinec shear zone) located more closely to Veporic thermal dome, while towards its peripheral parts (southern Ochtina belt) the M2 metamorphic process and steatitization gradually weakened.Studies from Sinec shear zone (being the prominent AD2 -AD3 structure of northern Sinec belt) , where the dolomite/magnesite lenses (replacement in M1) and their accompanying lithology were in AD1 sandwitched between more competent basement blocks, proved in AD2 the pervasite steatitization, the talc and dolomite 2 origin in extensional microstructures ( metamorphic process M2; 490 -540℃, 240-330 MPa, 1. c. ).The economic accummulations of talc in Sinec belt are the products of antithetic shearing during the AD3 phase, being the gradual continuation of AD2 ( change of kinematics from unroofing to regional transpressional shearing). Contrary to the northern Sinec belt having located the AD3 deformation into narrow shear zone with soft lithology surrounded by hard lithology, in southern Ochtina belt the deformation AD3 was accommodated by wide soft rock column with rigid carbonate blocks floating inside. The lower P-T ( M2)conditions and deformational gradient in Ochtina belt during AD2 and AD3 phases caused why no economic talc accummulations developed there.The results of presented study can be used as general criteria for magnesite and talc prospection in Alpine type terranes. 展开更多
关键词 Magnesite and talc genesis Geodynamic evolution Shear zones MICROSTRUCTURES Fluid inclusions WesternCarpathians
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部