为了提升驱油用聚合物在苛刻油藏环境中的耐温与抗盐性,设计合成了一种以多元胺-丙烯酸甲酯为聚合前体,具有超支化结构的聚酰胺-胺类单体,并在此基础上合成了一种长效抗剪切聚合物(LSRP)。考查了聚合单体浓度、引发温度、聚合时间、引...为了提升驱油用聚合物在苛刻油藏环境中的耐温与抗盐性,设计合成了一种以多元胺-丙烯酸甲酯为聚合前体,具有超支化结构的聚酰胺-胺类单体,并在此基础上合成了一种长效抗剪切聚合物(LSRP)。考查了聚合单体浓度、引发温度、聚合时间、引发剂组成和加量及水解度等因素对LSRP溶液黏度的影响,采用FTIR和1HNMR表征了单体及聚合物结构,对聚合物增黏、抗剪切、抗盐、注入性及驱油性能进行了评价。结果表明:聚合物LSRP具有较好的增黏能力、抗剪切性和稳定性,当原油黏度70～300 m Pa·s时,室内驱油实验采收率较水驱增加20%以上,矿场试验注入后期压力平稳上升。展开更多
The separate-layer injection in different interlayers and the injection of the same-molecular-weight polymer so- lution in a layer are necessary in the polymer flooding process because of heterogeneous multilayer sand...The separate-layer injection in different interlayers and the injection of the same-molecular-weight polymer so- lution in a layer are necessary in the polymer flooding process because of heterogeneous multilayer sandstone reservoirs in EOR projects. To alleviate the matching problems between the layer permeability and the injected polymer molecular weight, a molecular weight adjusting device with porous medium was designed on the basis of mechanical degradation principle. In terms of four variables （polymer concentration, pore diameter, length of shear component and flow rate ）, the theological behavior of hydrolyzed polyacrylamide （HPAM） solu- tion flowing through the device was investigated in detail. The change of these variables is able to control the shear rate of HPAM solutions through ceramic foam, and achieve the desired degree of shear degradation and the final theological parameters-viscosity loss, viscoelasticity and pressure drop. Therefore, a linear relationship between viscosity loss and shearing rate was established so as to obtain the targeted viscosity easily. Field tests in the Daqing Oil Field showed that the polymer molecular weight could drop 20% to 50%. In a word, the results could guide the industrial application of the novel device and the further study of polymer degradation flowing through the porous medium.展开更多
This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities hav...This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into "dead knots" in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.展开更多
文摘为了提升驱油用聚合物在苛刻油藏环境中的耐温与抗盐性,设计合成了一种以多元胺-丙烯酸甲酯为聚合前体,具有超支化结构的聚酰胺-胺类单体,并在此基础上合成了一种长效抗剪切聚合物(LSRP)。考查了聚合单体浓度、引发温度、聚合时间、引发剂组成和加量及水解度等因素对LSRP溶液黏度的影响,采用FTIR和1HNMR表征了单体及聚合物结构,对聚合物增黏、抗剪切、抗盐、注入性及驱油性能进行了评价。结果表明:聚合物LSRP具有较好的增黏能力、抗剪切性和稳定性,当原油黏度70～300 m Pa·s时,室内驱油实验采收率较水驱增加20%以上,矿场试验注入后期压力平稳上升。
基金Supported by the Program for Yangtse River Scholars and Innovative Research Terms in Universities(IRT0936)the National Basic Research Program of China(2009CB219905+2 种基金2009CB219907)the Daqing Oilfield Co.Ltd
文摘The separate-layer injection in different interlayers and the injection of the same-molecular-weight polymer so- lution in a layer are necessary in the polymer flooding process because of heterogeneous multilayer sandstone reservoirs in EOR projects. To alleviate the matching problems between the layer permeability and the injected polymer molecular weight, a molecular weight adjusting device with porous medium was designed on the basis of mechanical degradation principle. In terms of four variables （polymer concentration, pore diameter, length of shear component and flow rate ）, the theological behavior of hydrolyzed polyacrylamide （HPAM） solu- tion flowing through the device was investigated in detail. The change of these variables is able to control the shear rate of HPAM solutions through ceramic foam, and achieve the desired degree of shear degradation and the final theological parameters-viscosity loss, viscoelasticity and pressure drop. Therefore, a linear relationship between viscosity loss and shearing rate was established so as to obtain the targeted viscosity easily. Field tests in the Daqing Oil Field showed that the polymer molecular weight could drop 20% to 50%. In a word, the results could guide the industrial application of the novel device and the further study of polymer degradation flowing through the porous medium.
基金supported, in part, by the National Science Foundation of the United States (DMR-0821697, CMMI-0926522, DMR-1105135)
文摘This work extends our previous understanding concerning the nonlinear responses of entangled polymer solutions and melts to large external deformation in both simple shear and uniaxial extension. Many similarities have recently been identified for both step strain and startup continuous deformation, including elastic yielding, i.e., chain disentanglement after cessation of shear or extension, and emergence of a yield point during startup deformation that involves a deformation rate in excess of the dominant molecular relaxation rate. At a sufficiently high constant Hencky rate, uniaxial extension of an entangled melt is known to produce window-glass-like rupture. The present study provides evidence against the speculation that chain entanglements tie up into "dead knots" in constant-rate extension because of the exponentially growing chain stretching with time. In particular, it is shown that even Instron-style tensile stretching, i.e., extending a specimen by applying a constant velocity on both ends, results in rupture. Yet, in the same rate range, the same entangled melt only yields in simple shear, and the resulting shear banding is clearly not a characteristic of rupture. Thus, we conclude that chain entanglements respond to simple shear in the manner of yielding whereas uniaxial extension is rather effective in causing some entanglements to lock up, making it impossible for the entanglement network to yield at high rates.
