变参数双肢剪力墙内力分析奇异函数法

介绍了用奇异函数求解具有变参数剪力墙结构内力的新方法．首先引入奇异函数来描述剪力墙的变参数，得到连续的墙肢位移函数，再以连梁剪力为未知量，利用变形协调条件建立剪力墙结构分析的矩阵方程，最后解方程得到结构内力．比较其它简化方法，奇异函数法求解更为简单。

平面板材和角状板材的贴角焊缝质量检测方法分析

新型波纹钢腹板PC组合箱梁结构被广泛应用于国内外桥梁工程中,其中对波形钢腹板底板连接件的翼缘板和角钢的贴角焊缝质量有着严格的要求,采用超声波检测难以判定是否达到二级焊缝的质量等级。针对这一情况,文章提出一种平面板材和角状板材的贴角焊缝质量检测方法,该方法基于剪力参数来评估焊缝质量,通过对翼缘板和角钢施加平行于焊接面的剪力,监测在逐渐增加剪力作用的情况下焊缝的响应,从而准确地进行贴角焊缝的质量判定。

Shear resistance performance of steel-concrete-steel composite shear wall

For a deeper understanding of the shear resistance performance of the steel-concrete-steel composite shear wall, the main influence factors such as the thicknesses of the steel plates and the concrete, the strength grades of the concrete and the span-depth ratios of the composite wall, which have impacts on the shear resistance performance of the composite shear wail, are analyzed by the numerical simulation method. Meanwhile, the simplified calculation formulae of the initial elastic lateral-resisting stiffness and the shear bearing capacity of the composite shear wall are also proposed. The research shows that with the increase in the thicknesses of the steel plates and the concrete and the increase in the strength grades of the concrete, the shear performance of the shear wall improves obviously; the span-depth ratios of the composite wall have a significant effect on the initial elastic lateral- resisting stiffness, but a small effect on the shear bearing capacity. Comparing the results of the simplified calculation formulae with those of the nonlinear finite element method, it is obvious that the presented formulae are reasonable and meet the real force state of the structure. These conclusions can serve as a preliminary design reference for the steel-concrete- steel composite shear wall.

Experimental study on the shear behavior of grout-infilled specimens and micromechanical properties of grout-rock interface

The grout-rock interfacial property is one of the key factors associated with the strength of grouted rock masses.In this study,direct shear tests and nanoindentation tests were adopted to investigate the mechanical properties of the grout-rock interface at both the macroscale and microscale.The cohesion of the cement specimens was higher than that of the grout-infilled joint specimens,while their internal friction angle was lower than that of the grout-infilled joint specimens.A“separation method”for identifying the different phases according to the qualitative and quantitative estimations was introduced,and the irregular interfacial transition zone(ITZ)thickness and elastic modulus were estimated.The ITZ thickness of the grout-infilled sandstone specimen ranged from 0 to 30μm,whereas it was within the range of 10-40μm for the grout-infilled mudstone specimen.The average elastic modulus of the ITZ in grout-infilled sandstone and mudstone specimens was approximately 58.2%and 54.1%lower than that of the bulk grout,respectively.Regarding the incidence of the rock type,the interlacing between the grout and sandstone was better developed.The ITZ with a higher porosity and lower modulus had a significant effect on the mechanical properties of the grout-infilled specimens.

基于力学试验研究再生沥青混凝土的拌合模式

通过一系列力学试验探讨不同老化等级的旧料(RAP)在再生沥青混合料(RAC)实际拌合过程中的扮演模式。选取两种不同老化等级的RAP(掺量40%),按目标黏度200 Pa·s求得所需添加的新沥青用量及等级。并按黑石头拌合、完全拌合、实际拌合三种不同拌合模式,在最佳沥青用量下分别制作RAC试件。通过一系列力学试验分别求取RAC的力学参数,如动态模量、重复荷载下RAC试件永久变形量及流动数、三轴剪力强度试验摩尔库伦破坏包络线参数c、ψ值。根据数据分析并比较此两种不同老化等级的RAP在RAC实际拌合过程中所扮演的模式。结果表明,普通老化RAC完全拌合与实际拌合间力学参数的差异较小,表示黑石头现象不明显,完全拌合与实际拌合较接近;在过度老化RAC中,实际拌合试件的试验数据与完全拌合间的差距比普通老化RAC大,表示过度老化RAC在实际拌合过程中新、旧沥青间未达到充分混合,而有较明显的黑石头现象,拌合效益发挥有限。

Evaluation of soil arching effect due to partially mobilized shear stress in piled and geosynthetic-reinforced embankment

In piled and geosynthetic-reinforced(PGR) embankment, the arching behavior determines the overburden load on piles and subsoils. Placement of geosynthetic is effective in reducing the relative displacement between pile and subsoil. When the mobilized shear stress is less than the shear strength, partially developed arching will occur. Consequently, existing analytical methods, adopting the ultimate shear strength failure criterion, need to be improved. This study developed a simplified 2 D analytical method, which is based on the developing arching effect, to evaluate the load redistribution of the PGR embankment. Then, the influences of embankment height and internal friction angle, subsoil depth, ratio of pile cap width to pile clear spacing(RPC) and geosynthetic tensile stiffness on the critical height ratio, stress concentration ratio, soil arching ratio, geosynthetic tension and axial strain were investigated. This study suggests that a RPC of 1:1.0 and a one-way of single-layer geosynthetic tensile stiffness of 2000 kN/m should be considered as the sensitivity thresholds for the PGR embankment.

Pseudo-dynamic analysis of seismic stability of reinforced slopes considering non-associated flow rule

The required reinforcement force to prevent instability and the yield acceleration of reinforced slopes are computed under seismic loading by applying the kinematic approach of limit analysis in conjunction with the pseudo-dynamic method for a wide range of soil cohesion, friction angle, dilation angle and horizontal and vertical seismic coefficients. Each parameter threatening the stability of the slope enhances the magnitude of the required reinforcement force and vice versa. Moreover, the yield acceleration increases with the increase in soil shear strength parameters but decreases with the increase in the slope angle. The comparison of the present work with some of the available solutions in the literatures shows a reasonable agreement.

Physical and mechanical properties of sandstone containing a single fissure after exposure to high temperatures

In order to investigate the physical and mechanical properties of sandstone containing fissures after exposure to high temperatures,fissures with different angles α were prefabricated in the plate sandstone samples,and the processed samples were then heated at 5 different temperatures.Indoor uniaxial compression was conducted to analyze the change rules of physical properties of sandstone after exposure to high temperature,and the deformation,strength and failure characteristics of sandstone containing fissures.The results show that,with increasing temperature,the volume of sandstone increases gradually while the quality and density decrease gradually,and the color of sandstone remains basically unchanged while the brightness increases markedly when the temperature is higher than 585 ℃;the peak strength of sandstone containing fissures first decreases then increases when the temperature is between 25℃and 400℃.The peak strain of sandstone containing fissures increases gradually while the average modulus decreases gradually with increasing temperature,and the mechanical properties of sandstone show obvious deterioration after 400 ℃.The peak strain of sandstone containing fissures increases gradually while the average modulus decreases gradually with increasing temperature;with increasing angle αof the fissure,the evolution characteristics of the macro-mechanical parameters of sandstone are closely related to the their own mechanical properties.When the temperature is 800 ℃,the correlation between the peak strength and average modulus of sandstone and the angle α of the fissure is obviously weakened.The failure modes of sandstone containing fissures after high temperature exposure are of three different kinds including:tensile crack failure,tensile and shear cracks mixed failure,and shear crack failure.Tensile and shear crack mixed failure occur mainly at low temperatures and small angles;tensile crack failure occurs at high temperatures and large angles.

Experimental study on remodeling strength of granular materials under different loads and lengths of time

Remodeled clay and sand rock specimens were prepared by designing lateral confinement and water drainage experiments based on the stress exerted on granular materials in a waste dump.An in situ test was conducted in an internal waste dump;the physical and mechanical parameters of the remodeled rock mass dumped at different time and depths were measured.Based on statistics,regression analysis was performed with regard to the shearing stress parameters acquired from the two tests.Other factors,such as remodeling pressure(burial depth),remodeling time(amount of time since waste was dumped),and the corresponding functional relationship,were determined.Analysis indicates that the cohesion of the remodeled clay and its remodeling pressure are correlated by a quadratic function but are not correlated with remodeling time length.In situ experimental results indicate that the shear strength of reshaped granular materials in the internal dump is positively correlated with burial depth but poorly correlated with time length.Cohesion Cand burial depth H follow a quadratic function,specifically for a short time since waste has been dumped.As revealed by both in situ and laboratory experiments,the remodeling strength of granular materials varies in a certain pattern.The consistency of such materials verifies the reliability of the remodeling experimental program.

Energy analysis of stability on shallow tunnels based on non-associated flow rule and non-linear failure criterion

On the basis of upper bound theorem, non-associated flow rule and non-linear failure criterion were considered together.The modified shear strength parameters of materials were obtained with the help of the tangent method. Employing the virtual power principle and strength reduction technique, the effects of dilatancy of materials, non-linear failure criterion, pore water pressure,surface loads and buried depth, on the stability of shallow tunnel were studied. In order to validate the effectiveness of the proposed approach, the solutions in the present work agree well with the existing results when the non-associated flow rule is reduced to the associated flow rule and the non-linear failure criterion is degenerated to the linear failure criterion. Compared with dilatancy of materials, the non-linear failure criterion exerts greater impact on the stability of shallow tunnels. The safety factor of shallow tunnels decreases and the failure surface expands outward when the dilatancy coefficient decreases. While the increase of nonlinear coefficient, the pore water pressure coefficient, the surface load and the buried depth results in the small safety factor. Therefore, the dilatancy as well as non-linear failure criterion should be taken into account in the design of shallow tunnel supporting structure. The supporting structure must be reinforced promptly to prevent potential mud from gushing or collapse accident in the areas with abundant pore water, large surface load or buried depth.

The Study of CAD ＆ Processing Error for End-Gear with Arc Tooth

This paper presents methods for determining the basic geometry of end-gear with arc tooth external diameter, width of tooth, end module, number of teeth, pressure angle, tooth, tooth clearance parameters; at the same time gives the tooth bearing strength calculation method, and the formulas to calculate the tooth shear stress, surface stress and bolt fastening force of equivalent stress is established; finally write the software error simulation analysis.

Discussion of Research Related to Structural Plane of Rock Mass Slope

In this paper, firstly, the rock slope and rock mass structure are introduced. And then, two aspects of the study of the structural plane are discussed： The first aspect is method for determining mechanical parameters of structural plane; The second aspect is analysis of shear strength of structural plane.