The characteristics of hot deformation of an α＋β titanium alloy Ti-6.5Al-3.5Mo-1.5Zr-0.3Si with acicular microstructure were studied using isothermal hot compressive tests in a strain rate range of 0.01-10 s^-1 at ...The characteristics of hot deformation of an α＋β titanium alloy Ti-6.5Al-3.5Mo-1.5Zr-0.3Si with acicular microstructure were studied using isothermal hot compressive tests in a strain rate range of 0.01-10 s^-1 at 860-1 100 ℃. The true stress-tree strain curves of alloy hot-compressed in the α＋β region exhibit a peak stress followed by continuous flow softening; whereas in the β region, the flow stress attains a steady-state regime. At a strain rate of 10 s^-1 and in a wide temperature range, the alloy exhibits plastic flow instability. According to the kinetic rate equation, the apparent activation energies are estimated to be about 633 kJ/mol in the α＋β region and 281 kJ/mol in the β region, respectively. The processing maps show a domain of the globularization process of a colony structure and α dynamic recrystallization in the temperature range of 860-960 ℃ with a peak efficiency of about 60%, and a domain of β dynamic recrystallization in the β region with a peak efficiency of 80%.展开更多
A parameter, known as the parameter of humidification vibration deformation, was proposed, describing quantitatively the impact of water content on vibration settlement deformation, and its relationship with humidific...A parameter, known as the parameter of humidification vibration deformation, was proposed, describing quantitatively the impact of water content on vibration settlement deformation, and its relationship with humidification water content, dynamic shear stress peak value, initial consolidation stress and vibration frequency was built. The result shows that 1） the parameter of humidification vibration deformation increases with the vibration shear stress peak value increasing. 2） The humidification water content has significant influence on the curve of the parameter of humidification vibration deformation and the peak vibration shear stress. When the humidification water content is low, the curve increases slowly. However, when the humidification water content is high, the curve increases rapidly. 3） Initial consolidation stress has significant influence on the humidification vibration deformation coefficient. When initial consolidation stress is not large enough to destroy the loess structure, with initial consolidation stress increasing, the humidification vibration deformation coefficient decreases. On the contrary, the humidification vibration deformation coefficient increases with initial consolidation stress increasing. 4） With the increase of vibration time, the parameter of humidification vibration settlement shows an increasing trend overall. The initial dynamic shear stress peak value and humidification water content all have significant effects on the curve of the parameter of humidification vibration settlement and vibration time. However, the humidification water content is even more significant.展开更多
A series of laboratory experiments and PFC numerical simulations for rock-like material specimens containing two unparallel fissures were carried out.On the basis of experimental and numerical results,the stress-strai...A series of laboratory experiments and PFC numerical simulations for rock-like material specimens containing two unparallel fissures were carried out.On the basis of experimental and numerical results,the stress-strain curves,mechanical properties,AE events,cracking behavior and energy characteristics were analyzed to reveal the macro-mechanical behavior and meso-mechanism of pre-fissured specimens under different loading rates.Investigated results show that:1)When the loading rate is relatively low,the stress-strain curves show a brittle response.When the loading rate is relatively high,the curve shows a more ductile response.Both of the peak strength and elastic mudulus increase with the increase of loading rate,which can be expressed as power functions.2)Four crack types are identified,i.e.,tensile crack,shear crack,far-field crack and surface spalling.Moreover,the tensile crack,far-field crack and surface spalling are under tensile mechanism,while the shear crack is under shear mechanism.3)The drops of the stress-strain curves all correspond to the crack initiation or coalescence,which is also linked to a sudden increasing in the accumulated micro-crack curve.4)Both of the maximum bond force and energy have the similar trend with the increase of loading rate to peak strength,which indicates that the trend of peak strength can be explained by the meso-mechanics and energy.展开更多
基金Project(50901063) supported by the National Natural Science Foundation of ChinaProject(2007DS0414, 2007BS05006) supported by the Science and Technology Program of Shangdong Province, ChinaProject supported by the Open Research Fund from State Key Laboratory of Rolling and Automation, Northeastern University, China
文摘The characteristics of hot deformation of an α＋β titanium alloy Ti-6.5Al-3.5Mo-1.5Zr-0.3Si with acicular microstructure were studied using isothermal hot compressive tests in a strain rate range of 0.01-10 s^-1 at 860-1 100 ℃. The true stress-tree strain curves of alloy hot-compressed in the α＋β region exhibit a peak stress followed by continuous flow softening; whereas in the β region, the flow stress attains a steady-state regime. At a strain rate of 10 s^-1 and in a wide temperature range, the alloy exhibits plastic flow instability. According to the kinetic rate equation, the apparent activation energies are estimated to be about 633 kJ/mol in the α＋β region and 281 kJ/mol in the β region, respectively. The processing maps show a domain of the globularization process of a colony structure and α dynamic recrystallization in the temperature range of 860-960 ℃ with a peak efficiency of about 60%, and a domain of β dynamic recrystallization in the β region with a peak efficiency of 80%.
基金Foundation item： Project（51178392） supported by the National Natural Science Foundation of China
文摘A parameter, known as the parameter of humidification vibration deformation, was proposed, describing quantitatively the impact of water content on vibration settlement deformation, and its relationship with humidification water content, dynamic shear stress peak value, initial consolidation stress and vibration frequency was built. The result shows that 1） the parameter of humidification vibration deformation increases with the vibration shear stress peak value increasing. 2） The humidification water content has significant influence on the curve of the parameter of humidification vibration deformation and the peak vibration shear stress. When the humidification water content is low, the curve increases slowly. However, when the humidification water content is high, the curve increases rapidly. 3） Initial consolidation stress has significant influence on the humidification vibration deformation coefficient. When initial consolidation stress is not large enough to destroy the loess structure, with initial consolidation stress increasing, the humidification vibration deformation coefficient decreases. On the contrary, the humidification vibration deformation coefficient increases with initial consolidation stress increasing. 4） With the increase of vibration time, the parameter of humidification vibration settlement shows an increasing trend overall. The initial dynamic shear stress peak value and humidification water content all have significant effects on the curve of the parameter of humidification vibration settlement and vibration time. However, the humidification water content is even more significant.
基金Project(BK20150005) supported by the Natural Science Foundation of Jiangsu Province for Distinguished Young Scholars,ChinaProject(2014YC10) supported by the Fundamental Research Funds for the Central Universities,China
文摘A series of laboratory experiments and PFC numerical simulations for rock-like material specimens containing two unparallel fissures were carried out.On the basis of experimental and numerical results,the stress-strain curves,mechanical properties,AE events,cracking behavior and energy characteristics were analyzed to reveal the macro-mechanical behavior and meso-mechanism of pre-fissured specimens under different loading rates.Investigated results show that:1)When the loading rate is relatively low,the stress-strain curves show a brittle response.When the loading rate is relatively high,the curve shows a more ductile response.Both of the peak strength and elastic mudulus increase with the increase of loading rate,which can be expressed as power functions.2)Four crack types are identified,i.e.,tensile crack,shear crack,far-field crack and surface spalling.Moreover,the tensile crack,far-field crack and surface spalling are under tensile mechanism,while the shear crack is under shear mechanism.3)The drops of the stress-strain curves all correspond to the crack initiation or coalescence,which is also linked to a sudden increasing in the accumulated micro-crack curve.4)Both of the maximum bond force and energy have the similar trend with the increase of loading rate to peak strength,which indicates that the trend of peak strength can be explained by the meso-mechanics and energy.
