The microstructure and mechanical properties of 105 mm thick 5083 aluminum alloy hot rolled plate were investigated by metallurgical microscope, scanning electron microscope and tensile testing machine, and three majo...The microstructure and mechanical properties of 105 mm thick 5083 aluminum alloy hot rolled plate were investigated by metallurgical microscope, scanning electron microscope and tensile testing machine, and three major characteristic problems in mechanical properties inhomogeneity were explained. The results show that the mechanical properties of the rolled plate are inhomogeneous along the thickness direction. From the surface to the center, the strength shows an inverted "N" shape change and the elongation presents a semi "U" shape change. Several similar structural units composed of long fibrous grains(LFG) and short fibrous grains bands(SFGB) exist in a special layer(Layer 2) adjacent to the surface. This alternating layered distribution of LFG and SFGB is conducive to improving the plasticity by dispersing the plastic deformation concentrated on the boundary line(BL) between them. However, their different deformability will cause the alternation of additional stresses during the hot rolling, leading to the strength reduction. The closer the location to the center of the plate is, the more likely the recovery rather than the recrystallization occurs. This is the possible reason for the unnegligible difference in strength near the central region(Layer 4 and Layer 5).展开更多
The local inhomogeneity of the stir zone in friction stir welded face-centered cubic metal was investigated,which has multiple activated slip systems during plastic deformation,by selecting commercial AA1050 aluminum ...The local inhomogeneity of the stir zone in friction stir welded face-centered cubic metal was investigated,which has multiple activated slip systems during plastic deformation,by selecting commercial AA1050 aluminum alloy as an ideal experimental material.The local inhomogeneity was evaluated by uniaxial tensile tests using small samples with a 1 mm gauge length.The corresponding microstructural parameters such as grain size,misorientation angle distribution,and micro-texture,were quantified by the backscattered electron diffraction technique.A comprehensive model was used to reveal the microstructure−mechanical property relationship.The experimental results showed that the uniaxial tensile property changes significantly across the weld.The maximum ultimate tensile strength(UTS)occurred in the center of the stir zone,which was 99.0 MPa.The weakest regions were located at the two sides of the stir zone.The largest difference value in UTS reached 14.9 MPa,accounting for 15%of the maximum UTS.The analysis on the structure−mechanical property relationship suggests that the micro-texture change with the location formed during the rotational material flow is the main reason for the local inhomogeneity.展开更多
基金Project(2011DFR50950)supported by the International Science and Technology Cooperation Program of ChinaProject(51971183)supported by the National Natural Science Foundation of ChinaProject(cstc2019jcyj-msxmX0594)supported by the Natural Science Foundation of Chongqing,China。
文摘The microstructure and mechanical properties of 105 mm thick 5083 aluminum alloy hot rolled plate were investigated by metallurgical microscope, scanning electron microscope and tensile testing machine, and three major characteristic problems in mechanical properties inhomogeneity were explained. The results show that the mechanical properties of the rolled plate are inhomogeneous along the thickness direction. From the surface to the center, the strength shows an inverted "N" shape change and the elongation presents a semi "U" shape change. Several similar structural units composed of long fibrous grains(LFG) and short fibrous grains bands(SFGB) exist in a special layer(Layer 2) adjacent to the surface. This alternating layered distribution of LFG and SFGB is conducive to improving the plasticity by dispersing the plastic deformation concentrated on the boundary line(BL) between them. However, their different deformability will cause the alternation of additional stresses during the hot rolling, leading to the strength reduction. The closer the location to the center of the plate is, the more likely the recovery rather than the recrystallization occurs. This is the possible reason for the unnegligible difference in strength near the central region(Layer 4 and Layer 5).
基金Project(51905437)supported by the National Natural Science Foundation of ChinaProject(2019M653726)supported by the China Postdoctoral Science FoundationProject(3102019QD0407)supported by the Fundamental Research Funds for the Central Universities,China。
文摘The local inhomogeneity of the stir zone in friction stir welded face-centered cubic metal was investigated,which has multiple activated slip systems during plastic deformation,by selecting commercial AA1050 aluminum alloy as an ideal experimental material.The local inhomogeneity was evaluated by uniaxial tensile tests using small samples with a 1 mm gauge length.The corresponding microstructural parameters such as grain size,misorientation angle distribution,and micro-texture,were quantified by the backscattered electron diffraction technique.A comprehensive model was used to reveal the microstructure−mechanical property relationship.The experimental results showed that the uniaxial tensile property changes significantly across the weld.The maximum ultimate tensile strength(UTS)occurred in the center of the stir zone,which was 99.0 MPa.The weakest regions were located at the two sides of the stir zone.The largest difference value in UTS reached 14.9 MPa,accounting for 15%of the maximum UTS.The analysis on the structure−mechanical property relationship suggests that the micro-texture change with the location formed during the rotational material flow is the main reason for the local inhomogeneity.
