In order to better design, fabricate and control pear handling machine, we should take into account mechanical and rheological properties of pear fruits as related to handling process. The changes in rheological prope...In order to better design, fabricate and control pear handling machine, we should take into account mechanical and rheological properties of pear fruits as related to handling process. The changes in rheological properties of pears stored at 5, 15, 25 ℃ and variable （fluctuating） temperature for 12 days were evaluated in terms of elasticity and viscosity parameters using creep tests. The elasticity and viscosity parameters in creep tests in general decreased with increase in storage time both under constant and variable storage conditions. For the variable storage condition, a bulk mean temperature calculated to account for a series combination of storage time and temperature to which the pears subjected. The changes in rheological properties due to variable storage temperature were described as a function of storage time. The result indicated that except the viscosity parameter of the Maxwell component of the four-element model, it was possible to describe the changes in rheological properties as a function of storage time, which are better physical parameters to estimate the quality of pears.展开更多
This paper presents results of a study on the mechanical properties of sandy and gravely soils within the Cordillera Blanca, Peru. The soils were divided into groups according to their origin(glacial, fluvial, or debr...This paper presents results of a study on the mechanical properties of sandy and gravely soils within the Cordillera Blanca, Peru. The soils were divided into groups according to their origin(glacial, fluvial, or debris flow). The grain size distribution of forty three soil samples was used to classify the soils according to the scheme of the Unified Soil Classification System(USCS). These distributions have then been used to estimate shear strength and hydraulic properties of the soils. There are clear differences between the soils which reflect their divergent origins. The glacial soils normally fit within one of two distinctive groups according to the proportion of fines(Group A, 7%-21.5%; Group B, 21%-65%). The estimation of shear strength at constant volume friction angle and peak shear strength of the glacial sediments with low content of fines was made using published data relating to the measured shear strength characteristics of soils with similar origins and grain size distributions. The estimated values were supported by measurements of the angle of repose taken from fourteen samples from two moraines and by shear tests on samples from one locality. The results of the grain size distribution werealso used to estimate the average hydraulic conductivity using the empirical Hazen formula which results were verified by field infiltration tests at two localities.展开更多
Straightening machine is widely used for improving the quality of the defective mild steel plates.In general,the capacity of straightening machine is affected by material properties,the initial shape of the incoming p...Straightening machine is widely used for improving the quality of the defective mild steel plates.In general,the capacity of straightening machine is affected by material properties,the initial shape of the incoming plate and the plastic ratio.The mechanics model describing the capacity of the machine was developed.The deviation of the straightening capacity curves was studied.Then,the presented model was evaluated by comparative study to filed production data.Finally,the influences of overstretch,straightening speed,strengthening coefficient,elastic modulus,width of the plate on the straightening capacity were studied.It is convenient to determine whether the plate can be straightened or not by a series of straightening capacity curves.The straightening speed,width of the plate and elastic modulus of the material are more sensitive to the straightening capacity than the strengthening coefficient.展开更多
The microstructure and mechanical properties of Mg-xCe-0.5Zn （x=0.5, 1.5, 2.5, molar fraction, %） alloys were examined using a nano-indentation technique. The alloys were fabricated using a vacuum induction melting ...The microstructure and mechanical properties of Mg-xCe-0.5Zn （x=0.5, 1.5, 2.5, molar fraction, %） alloys were examined using a nano-indentation technique. The alloys were fabricated using a vacuum induction melting method under an argon atmosphere The microstruetures of Mg-xCe-0.5Zn alloys mainly consist ofa-Mg and eutectic Mg12Ce phase. The volume fraction and size of the eutectic Mgl2Ce phase increase with increasing Ce contents. Nano-indentation test results show that the indentation hardness and elastic modulus of the eutectic Mg12Ce phase are higher than those of the a-Mg matrix. In addition, the mean indentation hardness and elastic modulus of the Mg-xCe-0.5Zn alloys increase with the Ce addition amount increasing.展开更多
The energy consumption of buildings in urban areas is one of the greatest source of energy wasting and, consequently, ofincreasing of CO2 emission. Research is currently focused on the reduction of this consumption th...The energy consumption of buildings in urban areas is one of the greatest source of energy wasting and, consequently, ofincreasing of CO2 emission. Research is currently focused on the reduction of this consumption through the use of passive air-conditioning systems, that can be integrated with conventional systems and give rise to the so-called hybrid systems. Historically, these passive systems were developed in the Mediterranean and Middle East area. The research approach on this topic involves the application of design strategies and the development of computational tools and control systems. The development of the hybrid systems is the result of the synergy between current scientific knowledge, advanced manufacturing and information technology. In this study, a modular housing system has been investigated under different conditions. Simulations have been repeated, in order to identify the configuration that provides the highest indoor comfort. The analysis of the different conditions has been carried out using a CFD （computational fluid dynamic） software. The paper shows the results developed by the Dipartimento di Architettura of the Universit^t di Palermo in the analysis of the natural ventilation effect on the indoor comfort.展开更多
文摘In order to better design, fabricate and control pear handling machine, we should take into account mechanical and rheological properties of pear fruits as related to handling process. The changes in rheological properties of pears stored at 5, 15, 25 ℃ and variable （fluctuating） temperature for 12 days were evaluated in terms of elasticity and viscosity parameters using creep tests. The elasticity and viscosity parameters in creep tests in general decreased with increase in storage time both under constant and variable storage conditions. For the variable storage condition, a bulk mean temperature calculated to account for a series combination of storage time and temperature to which the pears subjected. The changes in rheological properties due to variable storage temperature were described as a function of storage time. The result indicated that except the viscosity parameter of the Maxwell component of the four-element model, it was possible to describe the changes in rheological properties as a function of storage time, which are better physical parameters to estimate the quality of pears.
基金Financial support for the contribution was provided by Grant Agency of the Czech Republic (Project No. GACR P209/11/1000)
文摘This paper presents results of a study on the mechanical properties of sandy and gravely soils within the Cordillera Blanca, Peru. The soils were divided into groups according to their origin(glacial, fluvial, or debris flow). The grain size distribution of forty three soil samples was used to classify the soils according to the scheme of the Unified Soil Classification System(USCS). These distributions have then been used to estimate shear strength and hydraulic properties of the soils. There are clear differences between the soils which reflect their divergent origins. The glacial soils normally fit within one of two distinctive groups according to the proportion of fines(Group A, 7%-21.5%; Group B, 21%-65%). The estimation of shear strength at constant volume friction angle and peak shear strength of the glacial sediments with low content of fines was made using published data relating to the measured shear strength characteristics of soils with similar origins and grain size distributions. The estimated values were supported by measurements of the angle of repose taken from fourteen samples from two moraines and by shear tests on samples from one locality. The results of the grain size distribution werealso used to estimate the average hydraulic conductivity using the empirical Hazen formula which results were verified by field infiltration tests at two localities.
文摘Straightening machine is widely used for improving the quality of the defective mild steel plates.In general,the capacity of straightening machine is affected by material properties,the initial shape of the incoming plate and the plastic ratio.The mechanics model describing the capacity of the machine was developed.The deviation of the straightening capacity curves was studied.Then,the presented model was evaluated by comparative study to filed production data.Finally,the influences of overstretch,straightening speed,strengthening coefficient,elastic modulus,width of the plate on the straightening capacity were studied.It is convenient to determine whether the plate can be straightened or not by a series of straightening capacity curves.The straightening speed,width of the plate and elastic modulus of the material are more sensitive to the straightening capacity than the strengthening coefficient.
基金supported by a grant-in-aid for the National Core Research Center Program(No.R15-2006-022-02001-0)the Metals Bank project of the Korea Ministry of Knowledge Economy
文摘The microstructure and mechanical properties of Mg-xCe-0.5Zn （x=0.5, 1.5, 2.5, molar fraction, %） alloys were examined using a nano-indentation technique. The alloys were fabricated using a vacuum induction melting method under an argon atmosphere The microstruetures of Mg-xCe-0.5Zn alloys mainly consist ofa-Mg and eutectic Mg12Ce phase. The volume fraction and size of the eutectic Mgl2Ce phase increase with increasing Ce contents. Nano-indentation test results show that the indentation hardness and elastic modulus of the eutectic Mg12Ce phase are higher than those of the a-Mg matrix. In addition, the mean indentation hardness and elastic modulus of the Mg-xCe-0.5Zn alloys increase with the Ce addition amount increasing.
文摘The energy consumption of buildings in urban areas is one of the greatest source of energy wasting and, consequently, ofincreasing of CO2 emission. Research is currently focused on the reduction of this consumption through the use of passive air-conditioning systems, that can be integrated with conventional systems and give rise to the so-called hybrid systems. Historically, these passive systems were developed in the Mediterranean and Middle East area. The research approach on this topic involves the application of design strategies and the development of computational tools and control systems. The development of the hybrid systems is the result of the synergy between current scientific knowledge, advanced manufacturing and information technology. In this study, a modular housing system has been investigated under different conditions. Simulations have been repeated, in order to identify the configuration that provides the highest indoor comfort. The analysis of the different conditions has been carried out using a CFD （computational fluid dynamic） software. The paper shows the results developed by the Dipartimento di Architettura of the Universit^t di Palermo in the analysis of the natural ventilation effect on the indoor comfort.
