基于Solid Works的冲裁力实体模型建立方法及应用

介绍了基于Solid Works的力实体模型建立和计算方法.在分析冲裁力的基础上,根据冲裁力的特点,提出了基于Solid Works的力实体模型的概念和建模方法,推出了多工位冲裁力和压力中心的算法,并对该算法进行了实际应用.这种方法简单易行,不需要复杂计算,与冲模结构设计参数一致,是非常实用的冲裁力计算新方法.

Numerical simulation and experimental study of the hydrodynamics of a modeled reef located within a current

The hydrodynamic forces and flow field of artificial reef models in steady flow were numerically investigated using the RNG κ-ε turbulent model. The numerical simulation results are consistent with results observed by experimental means. A comparative study indicates that the corresponding errors of forces between calculated values and values observed in the experiment vary in the range of2.3%-11.2% and that the corresponding errors of velocities vary in the range of 1.3%-15.8%. The flow field numerical results show that upstream and vortices exist when the current passes over and through the surface of the reef model. This study suggests that the numerical simulation method can be applied to predict the forces and flow field associated with artificial reefs.

The Spatial Patterns of Initial Errors Related to the “Winter Predictability Barrier” of the Indian Ocean Dipole

In this study, using the Geophysical Fluid Dynamics Laboratory Climate Model version 2pl （GFDL CM2pl） coupled model, the winter predictability barrier （WPB） is found to exist in the model not only in the growing phase but also the Indian Ocean dipole （IOD） decaying phase of positive events due to the effect of initial errors. In particular, the WPB is stronger in the growing phase than in the decaying phase. These results indicate that initial errors can cause the WPB. The domi- nant patterns of the initial errors that cause the occurrence of the WPB often present an eastern-western dipole both in the surface and subsurface temperature components. These initial errors tend to concentrate in a few areas, and these areas may represent the sensitive areas of the predictions of positive IOD events. By increasing observations over these areas and eliminating initial errors here, the WPB phenomenon may be largely weakened and the forecast skill greatly improved.

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous （ARMAX） input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this papel; the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input and outputs, respectively. The experimental data, used in this study, were collected from a full-scale rough vertical cylinder at the Delft Hydraulics Laboratory. The practicality of the proposed method and also its efficiency in structural modeling were demonstrated through applying two hydrodynamic force components. For this purpose, an ARMAX model is first used to capture the dynamics of the process, relating in-line forces provided by water waves; secondly, the TARMAX model was applied to modeling and analysis of the lift forces on the cylinder. The evaluation of the lift force by the TARMAX model shows the model is successful in modeling the force from the surface elevation.

Experimental study on mechanical property of stiffening-ribbed-hollow-pipe cast-in place reinforced concrete girderless floor

Stiffening-ribbed-hollow-pipe cast-in place reinforced concrete girderless floor is a new-style hollow girderless floor system. Model experimental researches of simply-supported floor and four-corners bearing floor have been done on this new kind of floor system in this paper. The experiment results show that the floor system has good mechanical property such as high bearing capacity, big rigidity and good tensility. A theoretical method is presented in this paper that the stiffening-ribbed-hollow-pipe girderless floor can be analyzed by being converted equivalently to orthotropic solid slab. It is indicated that the method is correct and reasonable according to the contrast between theoretical calculated results and experimental measured results. The theoretical results coincide with the measured results well.

Tropical Pacific Decadal Variability in Subsurface Temperature

The nature decadal variability of the equatorial Pacific subsurface temperature is examined in the control simulation with the Geophysical Fluid Dynamics Laboratory coupled model CM2.1.The dominant mode of the subsurface temperature variations in the equator Pacific features a 20-40 year period and is North-South asymmetric about the equator.Decadal variations of the thermocline are most pronounced in the southwest of the Tropical Pacific.Decadal variation of the north-south asymmetric Sea Surface wind in the tropical Pacific,especially in the South Pacific Convergence,is the dominant mechanism of the nature decadal variation of the subsurface temperature in the equatorial Pacific.

Arctic Oscillation Responses to Black Carbon Aerosols Emitted from Major Regions

The responses of the Arctic Oscillation(AO) to global black carbon(BC) and BC emitted from major regions were compared using the atmospheric general circulation model Geophysical Fluid Dynamics Laboratory(GFDL) atmospheric general circulation model(AGCM) Atmospheric Model version 2.1(AM2.1). The results indicated that global BC could induce positive-phase AO responses, characterized by negative responses over the polar cap on 500 h Pa height fields, and zonal mean sea level pressure(SLP) decreasing while zonal wind increasing at 60°, with the opposite responses over midlatitudes. The AO indices distribution also shifted towards positive values. East Asian BC had similar impacts to that of global BC, while the responses to European BC were of opposite sign. South Asian BC and North American BC did not affect the AO significantly. Based on a simple linear assumption, we roughly estimated that the global BC emission increase could explain approximately 5% of the observed positive AO trend of +0.32 per decade during 1960 to 2000.

Simulation of Steady-State and Dynamic Behaviour of a Plate Heat Exchanger

The present paper deals with both the steady-state and dynamic simulation of a plate heat exchanger, in counter-flow arrangement. A CFD （computational fluid dynamics） program FLUENT has been used to predict the temperature distribution in steady-state conditions in plate heat exchanger as well as fluid temperatures at exit of flow channels in transient condition. The results are presented for the heat exchanger, which is simulated according to the configuration of the plate heat exchanger used in the experiment. The simulated results obtained by the CFD model have been compared with the experimental data from the literature, which shows that the CFD model developed in this study is capable of predicting the steady-state and transient performance of the plate heat exchangers satisfactorily.

Theory and experimental verification of valveless piezoelectric pump with rotatable unsymmetrical slopes

A valveless piezoelectric pump with rotatable unsymmetrical slopes is developed in this research.It has the following features:The pump integrates driving and transporting,and it can mix different fluids while transporting them.In this paper,firstly,the design of the valveless piezoelectric pump with rotatable unsymmetrical slopes was proposed,and the single-direction flow principle was explained.Then,the fluid mechanics model of the valveless piezoelectric pump with rotatable unsymmetrical slopes was established.Meanwhile,the numerical simulation of the pump was performed.Finally,the experiments on relationship between the rotation angles of the slope and the flow rates were conducted.The experimental results showed that the maximum flow was 32.32 mL min 1.The maximum relative error between the theoretical results and the experimental ones was 14.59%.For the relationship between rotation angles and flow ratio of two inlets,the relative error between the experimental and theoretical maxima was 3.75%.Thus,the experiments proved the feasibility of the pump design and verified the theory.

Fluid Resistance Characteristics Research of Nanowire Rotation under a Magnetic Field

In this study, a visualization-based experiment was performed to measure the motion of the nanowire under a magnetic field. A simulation method based on a multiple reference flame model （MRF model） was used to calcu- late fluid torque. Here, it was validated with the experimental data and theoretical results. Fluid torque of steady rotated nanowire was simulated and compared using experiment and theoretical models. The unsteady rotated condition was studied using transient simulation to compare with theory and the results showed that the accelera- tion of nanowire did not affect the flow field, indicating that the theoretical models based on the steady condition were still valid. The influence of solid walls on nanowire rotation was also studied here. The results showed that if the nanowire was placed close to the wall, the viscous force of wall would increase the velocity gradient around the nanowire, causing higher torque predictions. The fluid torque decreased quickly when the vertical distance between nanowire and wall exceeded 5 times the diameter of the wire.