PDC钻头切削齿破岩技术研究

在钻井过程中,鉴于PDC钻头切削齿的布局对PDC钻头的稳定性和钻井效率起着关键作用,国外研发设计了一种新型切削齿布局方法。即以切削齿的力平衡组来布齿,该力平衡组包含3个或4个连续切削齿,这些切削齿均匀且按一定角度分布在钻头周围主刀翼和副刀翼上,通过调整连续齿之间的角度和径向半径使切削齿组达到力平衡。实验结果表明,该技术能有效提高钻井效率,并使钻井过程中不平衡力达到平衡或降到最低限度。

Elemental Composition Method in Thermodynamics of Mul- tireaction Systems (I) Molar Number, Thermodynamic Properties and Partial Properties Relations

When species in the solution undergo multiple chemical reactions, the solution may be treated as a solution of all species actually present or as a hypothetical solution composed of elemental species. Based on the fundamental thermodynamic principle, the relationships of mole numbers, molar fractions, thermodynamic properties, partial molar properties, potential and fugacity between the hypothetical solution of elemental species and the equilibrated solution of actual species were derived. The hypothetical elemental solution provides a way of reducing the dimensionality of problem, simplifying the analysis and visualizing the phase behavior.

Influence of Pore Size,Salinity and Gas Composition upon the Hydrate Formation Conditions

An experimental device was set up to study the hydrate formation conditions.Effects of pore size,salinity,and gas composition on the formation and dissociation of hydrates were investigated.The result indicates that the induction time for the formation of hydrates in porous media is shorter than that in pure water.The decrease in pore size,by decreasing the size of glass beads,increases the equilibrium pressure when the salinity and temperature are kept constant.In addition,higher salinity causes higher equilibrium pressure when the pore size and temperature are kept constant.It is found that the effects of pore size and salinity on the hydrate equilibrium are quite different.At lower methane concentration,the hydrate equilibrium is achieved at lower pressure and higher temperature.

Elemental Composition Method in Thermodynamics of Multireaction Systems (II) Residual Properties, Property Changes of Mixing and Excess Properties Relations

Based on the concept of “element” and the fundamental thermodynamic principle,the relationships of the residual properties,the property changes of mixing,excess properties,fugacity coefficients and activity coefficients between the hypothetical solution of elemental species and the equilibrated solution of actual species were established.The hypothetical solution of elemental species provides a way of reducing the dimensionality of problem, simplifying the analysis and visualizing the phase behavior.

Counter-Rotating Type Tidal Stream Power Unit Mounted on a Mono-pile

The authors have invented a unique counter-rotating type tidal stream power unit, which is composed of tandem propellers and a double rotational armature type generator without a stator. The front and the rear propellers drive, as for an upstream type, the inner and the outer rotational armatures in the counter-rotating directions respectively, which keep the rotational torques counter-balanced between both propellers and armatures. This paper investigates experimentally the output and forces acting on a pile in a water channel, to get design materials of the mono-pile type tidal stream power unit. The output is maximal at the moderate rotational speed, as the same as a wind turbine. The force acting on the pile is affected by the drag, the Karman vortex and the dynamic balances of the tandem propellers, and has dominant frequencies due to not only the individual but also the interacting rotation of the front and the rear propellers.

Control of Grid Side Converter under Unbalance Voltage Conditions for Variable Speed Wind Turbine

This paper proposes the control of a grid side converter under unbalance voltage conditions for wind turbine system. The control technique is designed to operate under unbalance voltage by independent control between positive and negative components. The converter will regulate the DC link voltage at the specific value （650 V）. To verify an operation of the proposed control, the simulation is conducted by MATLAB/SIMULINK program. The experiments are conducted on a 5 kW system composed of wind turbine simulator, machine side converter and the propose grid side converter for operation under unbalance voltage. By comparing the simulation experimentation results, it can be shown that the proposed control can be continuously operating through an extremely sag voltage without damage. Moreover the proposed control can deliver power to the grid and regulate DC link voltage under unbalance voltage.

Research on DCC Strategy for Grid-Connected Inverter of D-PMSG under Unbalanced Network Voltage Conditions

According to performance analysis of a three-phase grid-connected inverter mathematical model of a directly-driven wind turbine with a permanent magnet synchronous generator (D-PMSG) under unbalanced network voltage conditions, a dual current-loop control strategy (DCC) oriented on positive voltage and negative current is proposed to inhibit the DC voltage fluctuation. Meanwhile, a notch filter is introduced into the conventional control strategy of a phase-locked loop to complete the low voltage ride through (LVRT) ability of the wind generator. A 1.5-MW D-PMSG with a back-to-back IGBT frequency converter was simulated in the PSCAD/EMTDC environment, and simulation results showed that: the maximum wind power tracking was achieved in this system and the proposed DCC strategy could successfully inhibit the rising aging of DC voltage and enhance the ride-through capability of D-PMSG wind generation system under unbalanced network voltage conditions.

Multiple target implementation for a doubly fed induction generator based on direct power control under unbalanced and distorted grid voltage

This paper presents a multiple target implementation technique for a doubly fed induction generator （DFIG） under unbalanced and distorted grid voltage based on direct power control （DPC）. Based on the mathematical model of DFIG under unbalanced and distorted voltage, the proportional and integral （PI） regulator is adopted to regulate the DFIG average active and reactive powers, while the vector P1 （VPI） resonant regulator is used to achieve three alternative control targets： （1） balanced and sinusoidal stator current; （2） smooth instantaneous stator active and reactive powers; （3） smooth electromagnetic torque and instantaneous stator reactive power. The major advantage of the proposed control strategy over the conventional method is that neither negative and harmonic sequence decomposition of grid voltage nor complicated control reference calculation is required. The insensitivity of the proposed control strategy to DFIG parameter deviation is analyzed. Finally, the DFIG experimental system is developed to validate the availability of the proposed DPC strategy under unbalanced and distorted grid voltage,