期刊文献+
共找到5篇文章
< 1 >
每页显示 20 50 100
内水压作用下盾构隧道自由变形法力法推导和力学特性研究
1
作者 段壮 《市政技术》 2023年第10期195-202,共8页
基于自由变形法理论对内水压作用下的盾构隧道结构内力进行了力法推导,并将计算结果与整环足尺加载试验数据进行了对比验证,进一步研究了不同埋深以及不同内水压作用下隧道结构的力学特性。研究结果表明:非满管状态下隧道结构的弯矩随... 基于自由变形法理论对内水压作用下的盾构隧道结构内力进行了力法推导,并将计算结果与整环足尺加载试验数据进行了对比验证,进一步研究了不同埋深以及不同内水压作用下隧道结构的力学特性。研究结果表明:非满管状态下隧道结构的弯矩随着内水压力的增加而增大,轴力略微减小;满管状态下,随着内水压力的增大,隧道结构弯矩基本保持不变,轴力大幅度减小;偏心距随着埋深的减小而大幅度增大,结构受力状态从压弯逐渐过渡为拉弯,对结构的承载以及裂缝控制极为不利,设计时要预留足够的安全储备。相关结论为类似工程计算提供了参考,具有一定的工程实用性。 展开更多
关键词 盾构隧道 内水压 自由变形法 力法推导 力学特性
下载PDF
地下圆形隧道自由变形法的力法推导及例证 被引量:3
2
作者 郭璇 孙文波 +1 位作者 张晓新 王梦恕 《铁道学报》 EI CAS CSCD 北大核心 2014年第9期85-91,共7页
自由变形法是地下压力拱(隧道衬砌)结构内力计算的基本方法之一,适用于淤泥、流沙、完全塑形或软土介质等理想松软地层的水下隧道或软塑土层压力拱的内力计算。本文推导出整体圆形衬砌自由变形法内力计算的力法过程及其严格理论解,为后... 自由变形法是地下压力拱(隧道衬砌)结构内力计算的基本方法之一,适用于淤泥、流沙、完全塑形或软土介质等理想松软地层的水下隧道或软塑土层压力拱的内力计算。本文推导出整体圆形衬砌自由变形法内力计算的力法过程及其严格理论解,为后续发展的弹性抗力、椭圆变形、弹性铰等同类方法提供对比参考,以明确公式计算的理论来源,便于理论拓展。通过实例对比地铁浅埋衬砌压力拱自由变形法的理论计算、实测与数值模拟。结果显示,该方法进行整体式衬砌的内力计算过程明确,其理论结果可应用于狮子洋半岩半土复合地层及南京地铁砂性土及黏性土层衬砌计算,可为类似工程设计必要的理论包络值提供参考,具有一定的工程实用性。 展开更多
关键词 自由变形法 力法推导 内力计算 适用条件 抗力简化修正
下载PDF
弧形侧向抗力法的力法推导及例证 被引量:2
3
作者 郭璇 张晓新 王梦恕 《岩石力学与工程学报》 EI CAS CSCD 北大核心 2015年第S2期4080-4090,共11页
弧形侧向抗力法是三角形侧向抗力法的理论修正。考虑大直径隧道穿越松软、水下软塑、复合等实际地层的非线性特征,进行其侧向抗力的弧形修正。给出部分正弦分布侧向抗力法的理论推导及例证。在自由变形法(FFD法)基础上对比三角形与弧形... 弧形侧向抗力法是三角形侧向抗力法的理论修正。考虑大直径隧道穿越松软、水下软塑、复合等实际地层的非线性特征,进行其侧向抗力的弧形修正。给出部分正弦分布侧向抗力法的理论推导及例证。在自由变形法(FFD法)基础上对比三角形与弧形分布侧向抗力影响下衬砌结构的内力,拓展理论应用的限制条件及范围,并讨论各侧向抗力法在实际复合地层中的适用性。对比南京地铁一号线实测与理论计算结果显示:单圆整体式衬砌采用弧形侧向抗力法进行内力计算的过程明确,理论结果的误差范围可适用于实例复合地层中的衬砌计算。该算例的应用为复合地层单圆隧道衬砌的工程设计提供内力极值的理论参考,弧形侧向抗力法对类似工程设计具有一定实用性。 展开更多
关键词 隧道工程 弧形侧向抗力法 力法推导 抗力系数优化 衬砌内力计算 适用条件
原文传递
Rock burst induced by roof breakage and its prevention 被引量:12
4
作者 何江 窦林名 +2 位作者 曹安业 巩思园 吕建为 《Journal of Central South University》 SCIE EI CAS 2012年第4期1086-1091,共6页
Based on the research on rock burst phenomenon induced by the breakage of thick and hard roof around roadways and working faces in coal mines, a criterion of rock burst induced by roof breakage (RBRB) was proposed a... Based on the research on rock burst phenomenon induced by the breakage of thick and hard roof around roadways and working faces in coal mines, a criterion of rock burst induced by roof breakage (RBRB) was proposed and the model was built. Through the model, a method calculating the varied stresses induced by roof breakage in support objects and coal body was proposed and a unified formula was derived for the calculation of stress increment on support objects and coal body under different breaking forms of roof. Whilst the formula for calculating dynamic load was derived by introducing dynamic index Kd. The formula was verified in Huating Mine by stress measurement. According to the formula for stress increment calculating, the sensitivities of dynamic load parameters were further studied. The results show that the thickness and breaking depth of roof, width of support objeet are the sensitive factors. Based on the discussion of the model, six associated effective methods for rock burst prevention are obtained. 展开更多
关键词 roof breakage dynamic load stress increment rock burst mining engineering
下载PDF
Effective stress in soils under different saturation conditions 被引量:1
5
作者 徐浩峰 谢康和 《Journal of Central South University》 SCIE EI CAS 2011年第6期2137-2142,共6页
BISHOP’s effective stress or two state stress variables are unsatisfactory for unsaturated soils where one of fluid phases is discontinuous, so new expressions of effective stress should be founded. The approach for ... BISHOP’s effective stress or two state stress variables are unsatisfactory for unsaturated soils where one of fluid phases is discontinuous, so new expressions of effective stress should be founded. The approach for derivation was according to the principle of equilibrium of forces (i.e., the stress-sharing principle), and it was firstly validated by demonstrating TERZAGHI’s principle of effective stress. And then, the derivations were subdivided into four parts according to different pore air states: 1) air bubbles were spherical and suspended in pore water; 2) air bubbles were bound on soil skeleton; 3) air bubbles held almost the single section of pore; 4) air phase was continuous. The different formulae of effective stress were presented. Conclusions are drawn as follows: 1) For nearly-saturated soils, the "real" effective stress would be a little smaller than TERZAGHI’s effective stress; 2) For soils in which air phase is discontinuous in the form of bubbles, a new concept of pore air elastic pressure is put forward, and the total stress can be constituted by effective stress, pore water pressure and pore air elastic pressure; 3) For soils in which air phase is continuous, effective stress is equal to the value of the total stress plus suction; 4) Suction can be divided into two parts: one is the effect caused by additional pressure, and the other is the contract action by the "skin". 展开更多
关键词 unsaturated soils effective stress SUCTION surface tension occluded gas SATURATION
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部