Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process in a Ranque-Hi...Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process in a Ranque-Hilsch vortex tube cleaning （cooling） system is investigated to analyze the impact of the operating gas type on the vortex tube performance; the operating gases used are air, nitrogen, oxygen, carbon dioxide and nitrogen dioxide. The computational fluid dynamic model used is equipped with a three-dimensional structure, and the steady-state condition is applied during computations. The standard k-c turbulence model is employed to resolve nonlinear flow equations, and various key parameters, such as hot and cold exhaust thermal drops, and power separation rates, are described numerically. The results show that nitrogen dioxide creates the greatest separation power out of all gases tested, and the numerical results are validated by good agreement with available experimental data. In addition, a comparison is made between the use of two different boundary conditions, the pressure-far-field and the pressure-outlet, when analyzing complex turbulent flows in the air separators. Results present a comprehensive and practical solution for use in future numerical studies.展开更多
Multiple fractured horizontal well(MFHW) is widely applied in the development of shale gas. To investigate the gas flow characteristics in shale, based on a new dual mechanism triple continuum model, an analytical sol...Multiple fractured horizontal well(MFHW) is widely applied in the development of shale gas. To investigate the gas flow characteristics in shale, based on a new dual mechanism triple continuum model, an analytical solution for MFHW surrounded by stimulated reservoir volume(SRV) was presented. Pressure and pressure derivative curves were used to identify the characteristics of flow regimes in shale. Blasingame type curves were established to evaluate the effects of sensitive parameters on rate decline curves, which indicates that the whole flow regimes could be divided into transient flow, feeding flow, and pseudo steady state flow. In feeding flow regime, the production of gas well is gradually fed by adsorbed gases in sub matrix, and free gases in matrix. The proportion of different gas sources to well production is determined by such parameters as storability ratios of triple continuum, transmissibility coefficients controlled by dual flow mechanism and fracture conductivity.展开更多
In this study, a visualization-based experiment was performed to measure the motion of the nanowire under a magnetic field. A simulation method based on a multiple reference flame model （MRF model） was used to calcu...In this study, a visualization-based experiment was performed to measure the motion of the nanowire under a magnetic field. A simulation method based on a multiple reference flame model （MRF model） was used to calcu- late fluid torque. Here, it was validated with the experimental data and theoretical results. Fluid torque of steady rotated nanowire was simulated and compared using experiment and theoretical models. The unsteady rotated condition was studied using transient simulation to compare with theory and the results showed that the accelera- tion of nanowire did not affect the flow field, indicating that the theoretical models based on the steady condition were still valid. The influence of solid walls on nanowire rotation was also studied here. The results showed that if the nanowire was placed close to the wall, the viscous force of wall would increase the velocity gradient around the nanowire, causing higher torque predictions. The fluid torque decreased quickly when the vertical distance between nanowire and wall exceeded 5 times the diameter of the wire.展开更多
文摘Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process in a Ranque-Hilsch vortex tube cleaning （cooling） system is investigated to analyze the impact of the operating gas type on the vortex tube performance; the operating gases used are air, nitrogen, oxygen, carbon dioxide and nitrogen dioxide. The computational fluid dynamic model used is equipped with a three-dimensional structure, and the steady-state condition is applied during computations. The standard k-c turbulence model is employed to resolve nonlinear flow equations, and various key parameters, such as hot and cold exhaust thermal drops, and power separation rates, are described numerically. The results show that nitrogen dioxide creates the greatest separation power out of all gases tested, and the numerical results are validated by good agreement with available experimental data. In addition, a comparison is made between the use of two different boundary conditions, the pressure-far-field and the pressure-outlet, when analyzing complex turbulent flows in the air separators. Results present a comprehensive and practical solution for use in future numerical studies.
基金Project(2011ZX05015)supported by Important National Science and Technology Specific Projects of the "Twelfth Five-years" Plan Period,China
文摘Multiple fractured horizontal well(MFHW) is widely applied in the development of shale gas. To investigate the gas flow characteristics in shale, based on a new dual mechanism triple continuum model, an analytical solution for MFHW surrounded by stimulated reservoir volume(SRV) was presented. Pressure and pressure derivative curves were used to identify the characteristics of flow regimes in shale. Blasingame type curves were established to evaluate the effects of sensitive parameters on rate decline curves, which indicates that the whole flow regimes could be divided into transient flow, feeding flow, and pseudo steady state flow. In feeding flow regime, the production of gas well is gradually fed by adsorbed gases in sub matrix, and free gases in matrix. The proportion of different gas sources to well production is determined by such parameters as storability ratios of triple continuum, transmissibility coefficients controlled by dual flow mechanism and fracture conductivity.
基金supported by the National Natural Science Foundation of China (Grant No. 50876006)the Fundamental Research Funds for the Central Universities (Grant No. 2011YJS053)
文摘In this study, a visualization-based experiment was performed to measure the motion of the nanowire under a magnetic field. A simulation method based on a multiple reference flame model （MRF model） was used to calcu- late fluid torque. Here, it was validated with the experimental data and theoretical results. Fluid torque of steady rotated nanowire was simulated and compared using experiment and theoretical models. The unsteady rotated condition was studied using transient simulation to compare with theory and the results showed that the accelera- tion of nanowire did not affect the flow field, indicating that the theoretical models based on the steady condition were still valid. The influence of solid walls on nanowire rotation was also studied here. The results showed that if the nanowire was placed close to the wall, the viscous force of wall would increase the velocity gradient around the nanowire, causing higher torque predictions. The fluid torque decreased quickly when the vertical distance between nanowire and wall exceeded 5 times the diameter of the wire.
