电磁机构的特性研究

依据牛顿运动定律、转动定律和麦克斯韦电磁力计算公式,讨论了电磁机构的电磁吸力特性、反力特性和合力特性,引入了更符合机械运动规律的特性变量、特性曲线,以期望更有效地指导研究和实践活动。

电气制动在株洲航电枢纽工程的应用

介绍发电机的电气制动原理,并详细分析了电气制动在株洲航电枢纽工程中的使用原因、方式及控制流程。

华中数控成功参展CIMT2009

本届CIMT2009展会,华中数控集中展出自主知识产权系列中、高档数控系统产品,包括:全数字高档数控装置;全数字驱动装置及交流伺服电机、主轴电机;大扭矩力矩电机及驱动装置等。展出的华中世纪星高档数控装置产品包括:HNC-210A/B/C系列、HNC-28/32系列,全部采用基于PC的开放式体系结构,通道数从1个到4个,控制轴数从2轴到32轴,联动轴数从2轴到9轴,液晶显示屏从5.4寸到15寸,满足用户从中档到高档的需求。特别是210系列产品,

Novel magneto-rheological fluid damper for passive force/torque feedback

The damper is capable of providing a continuously variable dampering force/torque in response to a magnetic field. It consists of an upside cap and an underside cap with a rotor located between them, the magneto-rheological （MR） fluid is filled into the gaps between the rotor and the caps. When the viscosity of the MR fluid increases under the influence of the magnetic field, the movement of the rotor will be resisted. The output torque is made up of the torque caused by the magnetic field, the torque caused by the plastic viscosity of the MR fluid, and the torque caused by the coulomb friction. The viscous torque can be calculated by a simple method and the frictional torque can be obtained by experiments. The torque dependent on the magnetic field is obtained by electromagnetic finite dement analysis. Experiments are done on the damper prototype and the validity of the design is verified.

Magnetic Moments and Electromagnetic Radii of Nucleon and △（1232） in an Extended Goldstone-Boson-Exchange Model

We derive the exchange currents of pseudoscalar, vector, and scalar mesons from Feynman diagrams, and use them to calculate the magnetic form factors of nucleon and △(1232). The magnetic moments and electromagnetic radii are obtained by using those form factors and the parameters determined from the masses of nucleon and △(1232).We find the magnetic moments and electromagnetic radii of nucleon and △(1232) can be produced very well in the extended Goldstone-Boson-exchange model in which all of pseudoscalar, vector, and scalar meson nonet are included.The magnetic moments of △(1232) are closer to experiment values and results from lattice calculation than the results obtained by the model without other mesons except for pion and sigma.

A novel technology for control of variable speed pumped storage power plant

Variable speed pumped storage machines are used extensively in wind power plant and pumped storage power plant. This paper presents direct torque and flux control(DTFC) of a variable speed pumped storage power plant(VSPSP). By this method both torque and flux have been applied to control the VSPSP. The comparison between VSPSP's control strategies is studied. At the first, a wind turbine with the capacity 2.2 k W and DTFC control strategies simulated then a 250 MW VSPSP is simulated with all of its parts(including electrical, mechanical, hydraulic and its control system) by MATLAB software. In all of simulations, both converters including two-level voltage source converter(2LVSC) and three-level voltage source converter(3LVSC) are applied. The results of applying 2LVSC and 3LVSC are the rapid dynamic responses with better efficiency, reducing the total harmonic distortion(THD) and ripple of rotor torque and flux.

Two-Component Description for Relativistic Fermions

We propose a two-component form to describe massive relativistic fermions in gauge theories. Relations between the Green＇s functions in this form and those in the conventional four-component form are derived. It is shown that the S-matrix elements in both forms are exactly the same. The description of the fermion in the new form simplifies significantly the γ-matrix algebra in the four-component form. In particular, in perturbative calculations the propagator of the fermion is a scalar function. As examples, we use this form to reproduce the relativistic spectrum of hydrodron atom, the S-matrix of e＋e-→μ＋μ- and QED one-loop vacuum polarization of photon.

Intelligent Wind Power Unit with Tandem Wind Rotors and Armatures （Optimization of Front Blade Profile）

The authors have invented the superior wind power unit, which is composed of the tandem wind rotors and the double rotational armature type generator without the traditional stator. The large-sized front wind rotor and the small-sized rear wind rotor drive, as for the upwind type, the inner and the outer rotational armatures, respectively, in keeping the rotational torque counter-balanced between both wind rotors/armatures. The unique rotational behaviors of the tandem wind rotors and the fundamental performances of the unit have been discussed at the previous paper. Continuously, this paper investigates experimentally and numerically the flow condition around the wind rotors to know the flow interactions between the front and the rear wind rotors, and optimizes the blade profile in the front wind rotor. The front blade should work fruitfully at the larger radius and had better not work at the smaller radius for giving plenty of wind energy to the rear wind rotor, taking account of the flow interaction between both wind rotors.

Application of direct torque control to electric screw presses for speeding up torque response and reducing starting current

Fast response and stable torque output are crucial to the performance of electric screw presses. This paper describes the design of a direct torque control （DTC） system for speeding up torque response and reducing the starting current of electric screw presses and its application to the J58K series of numerical control electric screw presses with a dual-motor drive. The DTC drive system encompasses speed control, torque reference control, and switching frequency control. Comparison of the DTC dual-AC induction motor drive with corresponding AC servo motor drive showed that for the J58K-315 electric screw press, the DTC drive system attains a higher maximum speed （786 r/min） within a shorter time （1.13 s） during a 250 nun stroke and undergoes smaller rise in temperature （42.0 ℃） in the motor after running for 2 h at a 12 min-1 strike frequency than the AC servo motor drive does （751 r/min within 1.19 s, and 50.6 ℃ rise）. Moreover, the DTC AC induction motor drive, with no need for a tachometer or position encoder to feed back the speed or position of the motor shaft, enjoys increased reliability in a strong-shock work environment.

Mitigating Subsynchronous Resonance Torques Using Dynamic Braking Resistor

Series compensation has proven to increase stability in transmission of electric power. On the other hand insertion of series capacitor results in severe subsynchronous torques. The subsynchronous torque leads to generator-turbine shaft damage. Mitigation of subsynchronous transient torques is achieved through resistor bank connected to generator terminals. The insertion of resistor bank is controlled by fuzzy logic controller. The proposed controller has been tested on IEEE First Benchmark Model and it proved to have good damping for the torsional torques.

Intraband Dynamics and Terahertz Emission in Biased GaAs/In_(0.53)Ga_(0.47)As Semiconductor Superlattices

Using an excitonic basis, we investigate the intraband polarization, optical absorption spectra, and terahertzemission of semiconductor superlattice with the density matrix theory. The excitonic Bloch oscillation is driven by thedc and ac electric fields. The slow variation in the intraband polarization depends on the ac electric field frequency. Theintraband polarization increases when the ac electric field frequency is below the Bloch frequency. When the ac electricfield frequency is above the Bloch frequency, the intraband polarization downwards and its intensity decreases. Thesatellite structures in the optical absorption spectra are presented. Due to excitonic dynamic localization, the emissionlines of terahertz shift in different ac electric field and dc electric field.

Influence of Design Parameters on Cogging Torque in Directly Driven Permanent Magnet Synchronous Wind Generators

In order to reduce the cogging torque, this paper investigates the influence of some parameters on the cogging torque developed by directly driven permanent magnet synchronous wind generators. Based on the remanent magnetic flux densities, the cogging torque is computed by using finite element method. It is shown that many parameters have influence on cogging torque and the slot and pole number combination has a significant effect on cogging torque. A simple factor has been introduced to indicate the effect of the slot and pole number combination. Some practical experience to reduce the cogging torque was applied to 2 MW three phase permanent magnet synchronous generator at rated speed of 37.5 rpm for wind energy conversion. The simulation and experiment results verify the effect of the proposed method.

Performance analysis for power generating system by using matrix method

We verified that the matrix method, a process analysis method used mainly for life cycle inventory analysis, has several advantages in the analysis of power systems, which have recently become more complex to enhance efficiency and to reduce C02 emissions. While designing a conceptual thermodynamic model of a complex power system, the matrix method provides a definite procedure and facilitates calculations, even if there is a recttrsive loop between the upstream and downstream processes. Similarly, in the case of partial modification to the constructed model, the matrix method can potentially reduce the time and effort required to calculate the thermodynamic balances, even if the constructed model is designed by others. In this study, we obtained mass flow and energy balances of example model power systems by the matrix method from the common thermodynamic conditions including temperatures and pressures which are set on the basis of an existing industrial steam power system. While analyzing the environmental impact of complex multiproduct power systems, such as carbon emissions, the matrix method can be used to easily derive the environmental impact of each final product. We could verify the efficacy of the matrix method in accurately deriving that of an example model power system.

Generating wind power time series based on its persistence and variation characteristics

Generation of wind power time series is an important foundational task for assisting electric power system planning and mak- ing decision. By analyzing the characteristics of wind power persistence and variation, th!.s paper proposes an improved Mar- kov chain Monte Carlo （MCMC） method, identified as the PV-MC method, for the direct generation of a synthetic series of wind power output. On the basis of the MCMC method, duration time and variation features are concluded in PV-MC method, gaining a more comprehensive reflection of wind power characteristics in the generated wind power time series. First, the wind power state series is generated to meet the state transition matrix based on the definition of the wind power state. Then, the time duration of each state in the series is determined by its respective duration character. Finally, the variation characteristic is used to convert the state series to a wind power time series. A significant amount of simulations are performed based on the PV-MC and MCMC methods and are then compared for 25 wind farms at 6 different locations throughout the world. The sim- ulation results show that the PV-MC method offers an excellent fit for the time domain features （persistence and variation characteristic） while holding other statistic features （mean value, variance, autocorrelation coefficient （ACC） and probability density function （PDF）） close to the MCMC method.

CP-Violation from Spin-1 Resonances in a Left-Right Dynamical Higgs Context

New physics field content in the nature, more specifically, from spin-1 resonances sourced by the extension of the SM local gauge symmetry to the larger local group SU(2)_LSU(2)_R U(1)_(B-L), may induce CP-violation signalling NP effects from higher energy regimes. In this work we completely list and study all the CP-violating operators up to the p^4-order in the Lagrangian expansion, for a non-linear left-right electroweak chiral context and coupled to a light dynamical Higgs. Heavy right handed fields can be integrated out from the physical spectrum, inducing thus a physical impact in the effective gauge couplings, fermionic electric dipole moment, and CP-violation in the decay h→ ZZ*→4 l that are briefly analysed. The final relevant set of effective operators have also been identified at low energies.

magnetic tunnel junctions spin-transfer torque magneto-resistance nanomagnet dynamics

We investigate bias and different barrier thicknesses effects on quantities related to spin and charge currents in MgO-based magnetic tunnel junctions. Using the non-Equilibrium Green＇s function formalism, we demonstrate that the in-plane and out-of-plane components of the spin-transfer torque have asymmetric and symmetric behaviors respectively. Magneto-resistance also decreases with increasing barrier thickness. The Landau–Lifshits–Gilbert equation describes the dynamics of the magnetization made by spin transfer torque. Increasing in spin current above its critical value or smaller the magnet reduces the switching time which is major result for making of new memory devices.