Aim To study the Lie symmetries and conserved quantities of holonomic mechanical systems in terms of qnasi-coordinates. Methods The definition of an infinitesimal generator for the holonomic mechanical systems in te...Aim To study the Lie symmetries and conserved quantities of holonomic mechanical systems in terms of qnasi-coordinates. Methods The definition of an infinitesimal generator for the holonomic mechanical systems in terms of quasi-coordinates was given. Lie's method of the invariance of ordinary differential equations under infinitesimal transformations was used. Results and Conclusion The determining equations of the Lie symmetries of holonomic mechanical systems in terms of quassi-coordinates are established. The structure equation and the form of conserved quantities are obtained. An example to illustrate the applicaiton of the result is given.展开更多
A novel frequency hopping(FH) sequences generator based on advanced encryption standard(AES) iterated block cipher is proposed for FH communication systems.The analysis shows that the FH sequences based on AES algorit...A novel frequency hopping(FH) sequences generator based on advanced encryption standard(AES) iterated block cipher is proposed for FH communication systems.The analysis shows that the FH sequences based on AES algorithm have good performance in uniformity, correlation, complexity and security.A high-speed, low-power and low-cost ASIC of FH sequences generator is implemented by optimizing the structure of S-Box and MixColumns of AES algorithm, proposing a hierarchical power management strategy, and applying ...展开更多
Based on the stress distribution characteristics of rock burst multiple sites, the criterion of horizontal stress inducing layer dislocation rock burst was established. Accordingly, the influencing factors were analyz...Based on the stress distribution characteristics of rock burst multiple sites, the criterion of horizontal stress inducing layer dislocation rock burst was established. Accordingly, the influencing factors were analyzed. The analysis results indicate that the stress condition, edge of etastic zone depth, supporting strength, and the friction angle and cohesion among coal stratum, roof and floor are sensitive factors. By introducing double-couple model, the layer dislocation rock burst was explained and the energy radiation characteristics were analyzed. The SOS micro-seismic monitoring system was applied to observe the rock burst hazards about a mining face. The results show that P- and S-wave energy radiations produced by rock burst have directional characteristics. The energy radiation characteristics of the 22 rock bursts occurring on 79Z6 long-wall face are basically the same as theoretical results, that is, the ratio of S-wave energy of sensor 4 to 6 is about 1.5 and that of P-wave is smaller than 0.5. The consistency of the monitored characteristics of the energy radiation theoretically increases with the total energy increasing.展开更多
It is well known that the Poincaré gauge theories of gravity do not have the structure of a standard gauge theory. Nevertheless, we show that a general form of action for the gravitational gauge fields in the gau...It is well known that the Poincaré gauge theories of gravity do not have the structure of a standard gauge theory. Nevertheless, we show that a general form of action for the gravitational gauge fields in the gauge theory does possess local Poincaré invariance.展开更多
Human resources are at the core ofany certification body.To establish the public credibilityof its work,a certification body must constructa professional and high quality personnel team thatcan meet the demands of var...Human resources are at the core ofany certification body.To establish the public credibilityof its work,a certification body must constructa professional and high quality personnel team thatcan meet the demands of various certificationtasks.The China Quality Mark Certification Group(CQM Group) attaches great importance to the constructionof human resources.Taking the training offirst-rate personnel as the primary objective of itsstrategic development,the Group has formulatedand gradually implemented the human resource developmentstrategy.It has also adapted and improvedthe professional structure of its certificationpersonnel in a timely manner,planned and organizedcontinuous education for these personnel andstrengthened monitoring of the use process of certificationpersonnel.This has been done to improvethe core competitiveness of the CQM Group and torealize the strategic objective of becoming an "internationalname brand certification body with first-ratepersonnel,first-rate management,first-rate qualityand first-rate services".展开更多
The arguments in this paper lead to a new definition of thermodynamic equilibrium that remedies the deficiencies of the current forms. This definition relates thermodynamic equilibrium to its physical causes and accou...The arguments in this paper lead to a new definition of thermodynamic equilibrium that remedies the deficiencies of the current forms. This definition relates thermodynamic equilibrium to its physical causes and accounts for all factors that determine it for all types of equilibrium. Standard definitions of thermodynamic equilibrium are incomplete. They do not take account of all factors that determine such equilibriums, discuss the impediments which may prevent them being reached or relate the properties that define equilibriums to the physical reasons that determine them when impediments are present. The laws of thermodynamics determine the requirements for equilibrium. These laws arise from the physical behaviour of the molecules in molecular systems and are consequences of the conservation of energy, the energies of molecules, statistics, Newton＇s laws of motion, and the equi-partition of energy. The standard definition of thermodynamic equilibrium correctly defines equilibrium whenever impediments are not factors. The discussion demonstrates how impediments arise, accounts for their role in defining equilibrium and how they relate to the energies of molecules at the conditions of the system. The new definition applies to all types of equilibrium.展开更多
The molar heat capacities(C_p) of guaiacol(CAS 90-50-1) and acetyl guaiacol ester(AGE, CAS 613-70-7) were determinated from 290 K to 350 K by differential scanning calorimetry(DSC), and expressed as a function of temp...The molar heat capacities(C_p) of guaiacol(CAS 90-50-1) and acetyl guaiacol ester(AGE, CAS 613-70-7) were determinated from 290 K to 350 K by differential scanning calorimetry(DSC), and expressed as a function of temperature. Two kinds of group contribution models were used to estimate the molar heat capacities of both guaiacol and AGE, the average relative deviation is less than 10%. The standard molar enthalpies of combustion of guaiacol and AGE were- 3590.0 k J·mol^(-1)and- 4522.1 k J·mol^(-1) by a precise thermal isolation Oxygen Bomb Calorimeter. The standard molar enthalpies of formation of guaiacol and AGE in a liquid state at298.15 K were calculated to be- 307.95 k J·mol^(-1) and- 448.72 k J·mol^(-1), respectively, based on the standard molar enthalpies of combustion. The thermodynamic properties are useful for exploiting the new synthesis method, engineering design and industry production of AGE using guaiacol as a raw material.展开更多
The permeability and sorptivity properties of the two prestressed concrete containment buildings （PCCBs） of a nuclear power plant in South China, which had been under operation for 5 years, were measured by using th...The permeability and sorptivity properties of the two prestressed concrete containment buildings （PCCBs） of a nuclear power plant in South China, which had been under operation for 5 years, were measured by using the autoclam permeability system. The air permeability, sorptivity and water permeability indexes of No.1 PCCB are smaller than or equal to 0.11 ln（102 Pa）/min, 0.98×10 ^7 m3/minl/2 and 1.93×10 ^7 m3/min1/2, respectively, and the air permeability, sorptivity and water permeability indexes of No.2 PCCB are smaller than or equal to 0.17 In（102 Pa）/min, 1.6×10 ^7 m3/min1/2 and 4.43 ×10 ^7 m3/min1/2, respectively. Based on the criteria for evaluating the protective quality of concrete structures in terms of their permeability and sorptivity properties, proposed by the research organization of the autoclam permeability system, the protective quality of No. 1 PCCB is still in very good grade and that of No.2 PCCB is not in very good grade but in good grade, and the in-service inspection of the protective quality of No.2 PCCB should be strengthened in the future.展开更多
Two new criterions of adiabaticity and two estimation formulas for backward scattering strength are derived in this paper. Numerical simulation shows that the estimations given here are better than the usual one.
The parameters, i.e. the Period and the Quality factor, of the Earth's free core nutation (FCN) are closely related to the dissipative coupling between the core and the mantle. Based on the FCN parameters obtained...The parameters, i.e. the Period and the Quality factor, of the Earth's free core nutation (FCN) are closely related to the dissipative coupling between the core and the mantle. Based on the FCN parameters obtained from the actual observations and theoretical simulation, significantly constrained in this study were several key parameters near the core-mantle boundary (CMB), related to the core and mantle coupling, including viscosity at the top of liquid core, conductivity at the bottom of the mantle, and dynamic ellipticity of the CMB. In order to choose high quality observations from global stations of the superconducting gravimeters (SG) on the Global Geodynamics Project (GGP) network, we adopted two criteria, the standard deviations of harmonic analysis on tidal observations and the quality of the FCN parameters calculated with the observations from single station. After the mean ocean tidal effects of the recent ocean tidal models were removed, the FCN parameters were retrieved by stacking the tidal gravity observations from the GGP network. The results were in a good agreement with those in the recent research by using the SG and/or the VLBI observations. Combined with an FCN theoretical model deduced by angular momentum method, the viscous and electromagnetic coupling parameters near the CMB were evaluated. Numerical results indicated that the viscosity at the top of the liquid core was in the range from 6.6×102 to 2.6×103 Pa·s, which was in good agreement with those obtained from the Earth's nutation, the FCN and variations in the length of day (LOD). The conductivity at the bottom of the mantle should be as large as 2.6×106-1.0×107 S m-1 to match the FCN quality factors from the actual observations. The dissipative coupling had a little influence of 1-2 sidereal days for the FCN period.展开更多
文摘Aim To study the Lie symmetries and conserved quantities of holonomic mechanical systems in terms of qnasi-coordinates. Methods The definition of an infinitesimal generator for the holonomic mechanical systems in terms of quasi-coordinates was given. Lie's method of the invariance of ordinary differential equations under infinitesimal transformations was used. Results and Conclusion The determining equations of the Lie symmetries of holonomic mechanical systems in terms of quassi-coordinates are established. The structure equation and the form of conserved quantities are obtained. An example to illustrate the applicaiton of the result is given.
基金Supported by National Natural Science Foundation of China (No.60676053)
文摘A novel frequency hopping(FH) sequences generator based on advanced encryption standard(AES) iterated block cipher is proposed for FH communication systems.The analysis shows that the FH sequences based on AES algorithm have good performance in uniformity, correlation, complexity and security.A high-speed, low-power and low-cost ASIC of FH sequences generator is implemented by optimizing the structure of S-Box and MixColumns of AES algorithm, proposing a hierarchical power management strategy, and applying ...
基金Project(2012LWB63) supported by the Fundamental Research Funds for the Central Universities, ChinaProject(SZBF2011-6-B35) supported by the Priority Acadamic Program Development of Jiangsu Higher Education Institutions (PAPD),China
文摘Based on the stress distribution characteristics of rock burst multiple sites, the criterion of horizontal stress inducing layer dislocation rock burst was established. Accordingly, the influencing factors were analyzed. The analysis results indicate that the stress condition, edge of etastic zone depth, supporting strength, and the friction angle and cohesion among coal stratum, roof and floor are sensitive factors. By introducing double-couple model, the layer dislocation rock burst was explained and the energy radiation characteristics were analyzed. The SOS micro-seismic monitoring system was applied to observe the rock burst hazards about a mining face. The results show that P- and S-wave energy radiations produced by rock burst have directional characteristics. The energy radiation characteristics of the 22 rock bursts occurring on 79Z6 long-wall face are basically the same as theoretical results, that is, the ratio of S-wave energy of sensor 4 to 6 is about 1.5 and that of P-wave is smaller than 0.5. The consistency of the monitored characteristics of the energy radiation theoretically increases with the total energy increasing.
基金supported by National Natural Science Foundation of China under Grant No.10675019
文摘It is well known that the Poincaré gauge theories of gravity do not have the structure of a standard gauge theory. Nevertheless, we show that a general form of action for the gravitational gauge fields in the gauge theory does possess local Poincaré invariance.
文摘Human resources are at the core ofany certification body.To establish the public credibilityof its work,a certification body must constructa professional and high quality personnel team thatcan meet the demands of various certificationtasks.The China Quality Mark Certification Group(CQM Group) attaches great importance to the constructionof human resources.Taking the training offirst-rate personnel as the primary objective of itsstrategic development,the Group has formulatedand gradually implemented the human resource developmentstrategy.It has also adapted and improvedthe professional structure of its certificationpersonnel in a timely manner,planned and organizedcontinuous education for these personnel andstrengthened monitoring of the use process of certificationpersonnel.This has been done to improvethe core competitiveness of the CQM Group and torealize the strategic objective of becoming an "internationalname brand certification body with first-ratepersonnel,first-rate management,first-rate qualityand first-rate services".
文摘The arguments in this paper lead to a new definition of thermodynamic equilibrium that remedies the deficiencies of the current forms. This definition relates thermodynamic equilibrium to its physical causes and accounts for all factors that determine it for all types of equilibrium. Standard definitions of thermodynamic equilibrium are incomplete. They do not take account of all factors that determine such equilibriums, discuss the impediments which may prevent them being reached or relate the properties that define equilibriums to the physical reasons that determine them when impediments are present. The laws of thermodynamics determine the requirements for equilibrium. These laws arise from the physical behaviour of the molecules in molecular systems and are consequences of the conservation of energy, the energies of molecules, statistics, Newton＇s laws of motion, and the equi-partition of energy. The standard definition of thermodynamic equilibrium correctly defines equilibrium whenever impediments are not factors. The discussion demonstrates how impediments arise, accounts for their role in defining equilibrium and how they relate to the energies of molecules at the conditions of the system. The new definition applies to all types of equilibrium.
文摘The molar heat capacities(C_p) of guaiacol(CAS 90-50-1) and acetyl guaiacol ester(AGE, CAS 613-70-7) were determinated from 290 K to 350 K by differential scanning calorimetry(DSC), and expressed as a function of temperature. Two kinds of group contribution models were used to estimate the molar heat capacities of both guaiacol and AGE, the average relative deviation is less than 10%. The standard molar enthalpies of combustion of guaiacol and AGE were- 3590.0 k J·mol^(-1)and- 4522.1 k J·mol^(-1) by a precise thermal isolation Oxygen Bomb Calorimeter. The standard molar enthalpies of formation of guaiacol and AGE in a liquid state at298.15 K were calculated to be- 307.95 k J·mol^(-1) and- 448.72 k J·mol^(-1), respectively, based on the standard molar enthalpies of combustion. The thermodynamic properties are useful for exploiting the new synthesis method, engineering design and industry production of AGE using guaiacol as a raw material.
基金Project(20050487017) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of ChinaProject (2009567) supported by China National Nuclear Corporation
文摘The permeability and sorptivity properties of the two prestressed concrete containment buildings （PCCBs） of a nuclear power plant in South China, which had been under operation for 5 years, were measured by using the autoclam permeability system. The air permeability, sorptivity and water permeability indexes of No.1 PCCB are smaller than or equal to 0.11 ln（102 Pa）/min, 0.98×10 ^7 m3/minl/2 and 1.93×10 ^7 m3/min1/2, respectively, and the air permeability, sorptivity and water permeability indexes of No.2 PCCB are smaller than or equal to 0.17 In（102 Pa）/min, 1.6×10 ^7 m3/min1/2 and 4.43 ×10 ^7 m3/min1/2, respectively. Based on the criteria for evaluating the protective quality of concrete structures in terms of their permeability and sorptivity properties, proposed by the research organization of the autoclam permeability system, the protective quality of No. 1 PCCB is still in very good grade and that of No.2 PCCB is not in very good grade but in good grade, and the in-service inspection of the protective quality of No.2 PCCB should be strengthened in the future.
基金The author would like to thank the Precision & Intelligent Laboratory of Tokyo Institute of Technology for their financial support. Part of the work was completed when the author visited there. The author also thanks Prof .E.G. Shang for bringing our in
文摘Two new criterions of adiabaticity and two estimation formulas for backward scattering strength are derived in this paper. Numerical simulation shows that the estimations given here are better than the usual one.
基金supported by Knowledge Innovation Program of the Chinese Academy of Sciences (Grant Nos. KZCX2-YW-133 and KZCX2-YW-Q08-2)National Natural Science Foundation of China (Grant Nos. 41021003, 41074053 and 40730316)
文摘The parameters, i.e. the Period and the Quality factor, of the Earth's free core nutation (FCN) are closely related to the dissipative coupling between the core and the mantle. Based on the FCN parameters obtained from the actual observations and theoretical simulation, significantly constrained in this study were several key parameters near the core-mantle boundary (CMB), related to the core and mantle coupling, including viscosity at the top of liquid core, conductivity at the bottom of the mantle, and dynamic ellipticity of the CMB. In order to choose high quality observations from global stations of the superconducting gravimeters (SG) on the Global Geodynamics Project (GGP) network, we adopted two criteria, the standard deviations of harmonic analysis on tidal observations and the quality of the FCN parameters calculated with the observations from single station. After the mean ocean tidal effects of the recent ocean tidal models were removed, the FCN parameters were retrieved by stacking the tidal gravity observations from the GGP network. The results were in a good agreement with those in the recent research by using the SG and/or the VLBI observations. Combined with an FCN theoretical model deduced by angular momentum method, the viscous and electromagnetic coupling parameters near the CMB were evaluated. Numerical results indicated that the viscosity at the top of the liquid core was in the range from 6.6×102 to 2.6×103 Pa·s, which was in good agreement with those obtained from the Earth's nutation, the FCN and variations in the length of day (LOD). The conductivity at the bottom of the mantle should be as large as 2.6×106-1.0×107 S m-1 to match the FCN quality factors from the actual observations. The dissipative coupling had a little influence of 1-2 sidereal days for the FCN period.
