The superplasticity of Al-6Mg-0.4Mn-0.25Sc-0.12Zr and Al-6Mg-0.4Mn-0.25Er-0.12Zr(mass fraction,%)alloys sheet was investigated,and the effect of Sc and Er was discussed.The results show that the superplastic ductiliti...The superplasticity of Al-6Mg-0.4Mn-0.25Sc-0.12Zr and Al-6Mg-0.4Mn-0.25Er-0.12Zr(mass fraction,%)alloys sheet was investigated,and the effect of Sc and Er was discussed.The results show that the superplastic ductilities of Al-Mg-Mn-Sc-Zr alloy was higher than that of Al-Mg-Mn-Er-Zr alloy at a wide temperature range of 400-540°C and high strain rate range of1.67×10-4-1.67×10-1 s-1.A maximum elongation 673%is obtained at 520°C and 1.67×10-3 s-1 in the Sc-containing alloy;while the Er-containing alloy only gets a maximum elongation 253%at 520°C and 1.67×10-3 s-1.Moreover,the average stress exponent of Sc-containing alloy is about 2.84,which is smaller than that of Er-containing alloy(3.64).Besides,the activation energies of the Sc-containing and Er-containing alloy are 84.8 k J/mol and 87.2 k J/mol,respectively.It is indicated that grain boundary sliding is the dominant mechanism during tensile deformation.According to microstructure examination,the better superplasticity of Sc-containing alloy may be attributed to the presence of Al3_(Sc,Zr)dispersoids,which can inhibit recrystallization and grain growth effectively.展开更多
Background: Many studies examining individual-level correlates in youth utilize self-report rather than objective measures of physical activity (PA). This utilization of self-report may result in associations that ...Background: Many studies examining individual-level correlates in youth utilize self-report rather than objective measures of physical activity (PA). This utilization of self-report may result in associations that are not present when examining objectively measured PA. The present study investigates the relationship between hypothesized correlates of PA with objectively and subjectively measured PA. Methods: Participating children (n 232, 101 males, mean age - 12.3 years) provided a minimum of four monitored days of PA (via accelerometer) and completed a survey assessing moderate-to-vigorous physical activity (MVPA), sport competence, appearance, enjoyment, and self-efficacy. Height and weight were measured and body mass index (BMI) was calculated. Results: Hierarchical regression models controlling for sex, race, and BMI Z-score showed that only sex and BMI Z-score were significant correlates of objective MVPA while only sex was a significant correlate of objective total PA. However, in a separate model examining the relationship with subjective MVPA, enjoyment of PA and self-efficacy for PA were the only significant correlates of self-reported PA. Conclusion: Measuring MVPA via self-report versus accelerometry produces considerably different results in a sample of young adolescents. Future studies should use caution when selecting outcome measures if the intent is to identify modifiable correlates of MVPA in youth.展开更多
In order to investigate the hot deformation behavior of superalloy GH696, isothermal compression experiments were carried out at deformation temperatures of 880?1120 °C and strain rates of 0.01?10 s?1. And the de...In order to investigate the hot deformation behavior of superalloy GH696, isothermal compression experiments were carried out at deformation temperatures of 880?1120 °C and strain rates of 0.01?10 s?1. And the deformation amount of all the samples was 50%. The strain rate sensitivity exponent (m) and strain hardening exponent (n) under different deformation conditions were calculated, meanwhile the effects of the processing parameters on the values ofm andn were analyzed. The results show that the flow stress increases with the increase of strain rate and the decrease of deformation temperature. The value ofm increases with the increase of deformation temperature and decreases with the increase of strain rate, while the value ofn decreases with the increase of deformation temperature. A novel flow stress model during hot deformation of superalloy GH696 was also established. And the calculated flow stress of the alloy is in good agreement with the experimental one.展开更多
The TFR(Tampered Failure Rate) model was proposed by Bhattacharyya and Soejoeti(1989) for step-stress accelerated life tests, On step-stress completely accelerated test occasions, the paper gives a method of estim...The TFR(Tampered Failure Rate) model was proposed by Bhattacharyya and Soejoeti(1989) for step-stress accelerated life tests, On step-stress completely accelerated test occasions, the paper gives a method of estimating parameters under a normal stress.展开更多
This paper introduces the finding of a unified Lorenz-like system.By gradually tuning the only parameter d,the reported system belongs to Lorenz-type system in the sense defined by Clikovsky.Meanwhile,this system belo...This paper introduces the finding of a unified Lorenz-like system.By gradually tuning the only parameter d,the reported system belongs to Lorenz-type system in the sense defined by Clikovsky.Meanwhile,this system belongs to Lorenz-type system,Lu-type system,Chen-type system with d less than,equivalent to and greater than 1.5,respectively,according to the classification defined by Yang.However,this system can only generate a succession of Lorenz-like attractors.Some basic dynamical properties of the system are investigated theoretically and numerically.Moreover,the tracking control of the system with exponential convergence rate is studied.Theoretical analysis and computer simulation show that the proposed scheme can allow us to drive the output variable x\ to arbitrary reference signals exponentially,and the guaranteed exponential convergence rate can be estimated accurately.展开更多
基金Project(2014M552149) supported by the China Postdoctoral Science FoundationProject(CX2016B041) supported by the Hunan Provincial Innovation Foundation For Postgraduate,ChinaProject(CSUZC201614) supported by the Open-End Fund for the Valuable and Precision Instruments of Central South University,China
文摘The superplasticity of Al-6Mg-0.4Mn-0.25Sc-0.12Zr and Al-6Mg-0.4Mn-0.25Er-0.12Zr(mass fraction,%)alloys sheet was investigated,and the effect of Sc and Er was discussed.The results show that the superplastic ductilities of Al-Mg-Mn-Sc-Zr alloy was higher than that of Al-Mg-Mn-Er-Zr alloy at a wide temperature range of 400-540°C and high strain rate range of1.67×10-4-1.67×10-1 s-1.A maximum elongation 673%is obtained at 520°C and 1.67×10-3 s-1 in the Sc-containing alloy;while the Er-containing alloy only gets a maximum elongation 253%at 520°C and 1.67×10-3 s-1.Moreover,the average stress exponent of Sc-containing alloy is about 2.84,which is smaller than that of Er-containing alloy(3.64).Besides,the activation energies of the Sc-containing and Er-containing alloy are 84.8 k J/mol and 87.2 k J/mol,respectively.It is indicated that grain boundary sliding is the dominant mechanism during tensile deformation.According to microstructure examination,the better superplasticity of Sc-containing alloy may be attributed to the presence of Al3_(Sc,Zr)dispersoids,which can inhibit recrystallization and grain growth effectively.
基金funded by the Centers for Disease Control and Prevention(K01-DP001126)
文摘Background: Many studies examining individual-level correlates in youth utilize self-report rather than objective measures of physical activity (PA). This utilization of self-report may result in associations that are not present when examining objectively measured PA. The present study investigates the relationship between hypothesized correlates of PA with objectively and subjectively measured PA. Methods: Participating children (n 232, 101 males, mean age - 12.3 years) provided a minimum of four monitored days of PA (via accelerometer) and completed a survey assessing moderate-to-vigorous physical activity (MVPA), sport competence, appearance, enjoyment, and self-efficacy. Height and weight were measured and body mass index (BMI) was calculated. Results: Hierarchical regression models controlling for sex, race, and BMI Z-score showed that only sex and BMI Z-score were significant correlates of objective MVPA while only sex was a significant correlate of objective total PA. However, in a separate model examining the relationship with subjective MVPA, enjoyment of PA and self-efficacy for PA were the only significant correlates of self-reported PA. Conclusion: Measuring MVPA via self-report versus accelerometry produces considerably different results in a sample of young adolescents. Future studies should use caution when selecting outcome measures if the intent is to identify modifiable correlates of MVPA in youth.
文摘In order to investigate the hot deformation behavior of superalloy GH696, isothermal compression experiments were carried out at deformation temperatures of 880?1120 °C and strain rates of 0.01?10 s?1. And the deformation amount of all the samples was 50%. The strain rate sensitivity exponent (m) and strain hardening exponent (n) under different deformation conditions were calculated, meanwhile the effects of the processing parameters on the values ofm andn were analyzed. The results show that the flow stress increases with the increase of strain rate and the decrease of deformation temperature. The value ofm increases with the increase of deformation temperature and decreases with the increase of strain rate, while the value ofn decreases with the increase of deformation temperature. A novel flow stress model during hot deformation of superalloy GH696 was also established. And the calculated flow stress of the alloy is in good agreement with the experimental one.
文摘The TFR(Tampered Failure Rate) model was proposed by Bhattacharyya and Soejoeti(1989) for step-stress accelerated life tests, On step-stress completely accelerated test occasions, the paper gives a method of estimating parameters under a normal stress.
基金Supported by the Research Foundation of Education Bureau of Hunan Province of China under Grant No.13C372Jiangsu Provincial Natural Science Foundation of China under Grant No.14KJB120007the Outstanding Doctoral Dissertation Project of Special Funds under Grant No.27122
文摘This paper introduces the finding of a unified Lorenz-like system.By gradually tuning the only parameter d,the reported system belongs to Lorenz-type system in the sense defined by Clikovsky.Meanwhile,this system belongs to Lorenz-type system,Lu-type system,Chen-type system with d less than,equivalent to and greater than 1.5,respectively,according to the classification defined by Yang.However,this system can only generate a succession of Lorenz-like attractors.Some basic dynamical properties of the system are investigated theoretically and numerically.Moreover,the tracking control of the system with exponential convergence rate is studied.Theoretical analysis and computer simulation show that the proposed scheme can allow us to drive the output variable x\ to arbitrary reference signals exponentially,and the guaranteed exponential convergence rate can be estimated accurately.