In the design of Hydraulic Manifold Blocks (HMB), dynamic performance of inner pipeline networks usually should be evaluated. To meet the design requirements, dynamic characteristic simulation is often needed. Based o...In the design of Hydraulic Manifold Blocks (HMB), dynamic performance of inner pipeline networks usually should be evaluated. To meet the design requirements, dynamic characteristic simulation is often needed. Based on comprehensive study on the existing simulation methods, a new method combined of Power Bond Graph(PBG) and Computational Fluid Dynamic (CFD) is proposed. In this method, flow field of typical channels inside HMB is analyzed with CFD to obtain the local resistance coefficients. Then, with these coefficients, a new sectional lumped-parameter model including kinetic friction factor is developed using PBG. A typical HMB design example is given and the comparison between the simulation and the experimental results demonstrates the feasibility and effectiveness of the proposed method.展开更多
Image forensics is a form of image analysis for finding out the condition of an image in the complete absence of any digital watermark or signature.It can be used to authenticate digital images and identify their sour...Image forensics is a form of image analysis for finding out the condition of an image in the complete absence of any digital watermark or signature.It can be used to authenticate digital images and identify their sources.While the technology of exemplar-based inpainting provides an approach to remove objects from an image and play visual tricks.In this paper, as a first attempt, a method based on zero-connectivity feature and fuzzy membership is proposed to discriminate natural images from inpainted images.Firstly, zero-connectivity labeling is applied on block pairs to yield matching degree feature of all blocks in the region of suspicious, then the fuzzy memberships are computed and the tampered regions are identified by a cut set.Experimental results demonstrate the effectiveness of our method in detecting inpainted images.展开更多
PSPICE model driven by an electric equivalent circuit of a piezoelectric circuit is presented. In order to confirm this model to be effective, an independent model of cold cathode fluorescent lamp(CCFL) driving circui...PSPICE model driven by an electric equivalent circuit of a piezoelectric circuit is presented. In order to confirm this model to be effective, an independent model of cold cathode fluorescent lamp(CCFL) driving circuit is used to conduct simulations, leading to a precise modeling. A library is configured through modeling and its accuracy is verified through simulations for widely used and representative lamps such as CCFL, fluorescent lamps, HID lamps, and electrodeless fluorescent lamps. On the basis of experiments, a lamp simulation is also performed using PSPICE, which allows us to take advantage of the lamp library easily. Also, PSPICE model driven by an electric equivalent circuit of a piezoelectric transformer is presented. In order to confirm this model to be effective, an independent model of CCFL driving circuit is used to conduct simulations, leading to a precise modeling. In addition, a new type of electronic ballast is proposed, which allows 35 W-class(T5-class) fluorescent lamp to work. This system is built by a rectifier which has improved power factor and half-bridge series resonant inverter. Also, with size of 27.5 mm high, 27.5 mm wide and 2.5 mm thick, the produced piezoelectric transformer has a high step-up ratio, through which it is possible for the electric ballast circuit to be lighter, smaller and more efficient. After the produced ballast is used to drive the fluorescent lamp for 25 min, it yields 0.95 in power factor correction, 86% in efficiency, 35.07 W in output voltage and 20.5 °C in temperature increase while meeting the characteristics of the 35 W-class fluorescent lamp.展开更多
基金National Natural Science Foundation of China (No.50375023)
文摘In the design of Hydraulic Manifold Blocks (HMB), dynamic performance of inner pipeline networks usually should be evaluated. To meet the design requirements, dynamic characteristic simulation is often needed. Based on comprehensive study on the existing simulation methods, a new method combined of Power Bond Graph(PBG) and Computational Fluid Dynamic (CFD) is proposed. In this method, flow field of typical channels inside HMB is analyzed with CFD to obtain the local resistance coefficients. Then, with these coefficients, a new sectional lumped-parameter model including kinetic friction factor is developed using PBG. A typical HMB design example is given and the comparison between the simulation and the experimental results demonstrates the feasibility and effectiveness of the proposed method.
文摘Image forensics is a form of image analysis for finding out the condition of an image in the complete absence of any digital watermark or signature.It can be used to authenticate digital images and identify their sources.While the technology of exemplar-based inpainting provides an approach to remove objects from an image and play visual tricks.In this paper, as a first attempt, a method based on zero-connectivity feature and fuzzy membership is proposed to discriminate natural images from inpainted images.Firstly, zero-connectivity labeling is applied on block pairs to yield matching degree feature of all blocks in the region of suspicious, then the fuzzy memberships are computed and the tampered regions are identified by a cut set.Experimental results demonstrate the effectiveness of our method in detecting inpainted images.
文摘PSPICE model driven by an electric equivalent circuit of a piezoelectric circuit is presented. In order to confirm this model to be effective, an independent model of cold cathode fluorescent lamp(CCFL) driving circuit is used to conduct simulations, leading to a precise modeling. A library is configured through modeling and its accuracy is verified through simulations for widely used and representative lamps such as CCFL, fluorescent lamps, HID lamps, and electrodeless fluorescent lamps. On the basis of experiments, a lamp simulation is also performed using PSPICE, which allows us to take advantage of the lamp library easily. Also, PSPICE model driven by an electric equivalent circuit of a piezoelectric transformer is presented. In order to confirm this model to be effective, an independent model of CCFL driving circuit is used to conduct simulations, leading to a precise modeling. In addition, a new type of electronic ballast is proposed, which allows 35 W-class(T5-class) fluorescent lamp to work. This system is built by a rectifier which has improved power factor and half-bridge series resonant inverter. Also, with size of 27.5 mm high, 27.5 mm wide and 2.5 mm thick, the produced piezoelectric transformer has a high step-up ratio, through which it is possible for the electric ballast circuit to be lighter, smaller and more efficient. After the produced ballast is used to drive the fluorescent lamp for 25 min, it yields 0.95 in power factor correction, 86% in efficiency, 35.07 W in output voltage and 20.5 °C in temperature increase while meeting the characteristics of the 35 W-class fluorescent lamp.
