期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Pervoskite-type Bao.sSro.sAl0.1Fe0.9O3-δ as Intermediate-Temperature Solid Oxide Fuel Cell Cathode 被引量:1
1
作者 Yun Gan Kui Xie 《Chinese Journal of Chemical Physics》 SCIE CAS CSCD 2012年第5期605-608,I0004,共5页
A cobalt-free perovskite-type Ba0.5Sr0.5A10.1Fe0.9O3-δ (BSAF) chemically studied as solid oxide fuel cell (SOFC) cathode. The ductivity, and electrode polarizations in symmetrical cell based is developed and elec... A cobalt-free perovskite-type Ba0.5Sr0.5A10.1Fe0.9O3-δ (BSAF) chemically studied as solid oxide fuel cell (SOFC) cathode. The ductivity, and electrode polarizations in symmetrical cell based is developed and electro- structures, electrical con- on mixed ion conducting electrolyte were investigated, respectively. The temperature dependence of conductivity of BSAF in air shows a typical semiconductor behavior with positive temperature coefficient up to 450℃ where the conductivity reaches 14.0 S/cm while above this temperature the negative temperature coefficient dominates the total conductivity. Electrochemical charac- terizations show desirable polarization resistance of BSAF cathode in a symmetric cell based on mixed ion conducting electrolyte at 650-700℃, A single SOFC with BSAF cathode shows OCV of 1.0 V and maximum output of 420 mW/cm2 at 700 ℃ with humidified hydrogen fuel and static air oxidant. 展开更多
关键词 Solid oxide fuel cell PEROVSKITE CATHODE Cobalt-free Mixed ionic conductor
下载PDF
多模声波导结构光纤的应变与温度系数计算方法 被引量:4
2
作者 王雪 路元刚 +2 位作者 张旭苹 王峰 李密 《光学学报》 EI CAS CSCD 北大核心 2015年第6期54-60,共7页
在基于布里渊拍频谱功率测量的分布式光纤传感中,提出对多模声波导结构光纤的应变与温度系数进行理论计算的方法。布里渊拍频谱的功率与光纤的有效折射率、杨氏模量、泊松比、声光有效面积等参数有关,这些参数会随光纤中应变和温度改变... 在基于布里渊拍频谱功率测量的分布式光纤传感中,提出对多模声波导结构光纤的应变与温度系数进行理论计算的方法。布里渊拍频谱的功率与光纤的有效折射率、杨氏模量、泊松比、声光有效面积等参数有关,这些参数会随光纤中应变和温度改变。通过建立应变和温度与布里渊拍频谱功率之间关系,可在已知光纤的折射率分布的情况下,从理论上推导出多模声波导结构光纤的布里渊拍频功率-应变系数和布里渊拍频功率-温度系数。以大有效面积光纤(LEAF)为例,计算了光纤的应变和温度系数,并与实验测量结果进行比较。结果表明,使用该方法得到的理论计算结果与实验值相吻合,验证了该计算方法的有效性。 展开更多
关键词 光纤光学 光纤传感 多模声波导结构光纤 布里渊拍频谱 功率-应变系数 功率-温度系数
原文传递
A 155 Mbps laser diode driver with automatic power and extinction ratio control
3
作者 CHEN Xiao-fei ZOU Xue-cheng +2 位作者 LIN Shuang-xi LIU Zheng-lin JIN Hai 《Journal of Zhejiang University-Science A(Applied Physics & Engineering)》 SCIE EI CAS CSCD 2007年第8期1346-1350,共5页
An integrated laser diode driver(LDD) driving an edge-emitting laser diode was designed and fabricated by 0.35 μm BiCMOS technology. This paper proposes a scheme which combines the automatic power control loop and te... An integrated laser diode driver(LDD) driving an edge-emitting laser diode was designed and fabricated by 0.35 μm BiCMOS technology. This paper proposes a scheme which combines the automatic power control loop and temperature com-pensation for modulation current in order to maintain constant extinction ratio and average optical power. To implement tem-perature compensation for modulation current,a novel circuit which generates a PTAT current by using the injecting base current of a bipolar transistor in saturation region,and alternates the amplifier feedback loop(closed or not) to control the state of the current path is presented. Simulation results showed that programmed by choice of external resistors,the IC can provide modu-lation current from 5 mA to 85 mA with temperature compensation adjustments and independent bias current from 4 mA to 100 mA. Optical test results showed that clear eye-diagrams can be obtained at 155 Mbps,with the output optical power being nearly constant,and the variation of extinction ratio being lower than 0.7 dB. 展开更多
关键词 Laser diode driver (LDD) Automatic power control (APC) Extinction ratio Temperature compensation
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部