期刊文献+
共找到9篇文章
< 1 >
每页显示 20 50 100
功能化COFs的制备及其对废水中Cu(Ⅱ)的吸附性能
1
作者 陆素芬 韦云娇 +3 位作者 廖蓓玲 韩雪 黄秋银 陆俊宇 《湿法冶金》 CAS 北大核心 2023年第1期54-60,共7页
研究了以均苯三甲醛和2,5-二氨基-1,4-苯二硫酚二盐酸盐为配体制备功能化COFs吸附材料,并用于从废水中吸附Cu(Ⅱ),通过FT-IR、SEM、EDS等表征了COFs的结构、形貌及元素组成,考察了初始Cu(Ⅱ)质量浓度、吸附时间、废水pH、温度等对Cu(Ⅱ... 研究了以均苯三甲醛和2,5-二氨基-1,4-苯二硫酚二盐酸盐为配体制备功能化COFs吸附材料,并用于从废水中吸附Cu(Ⅱ),通过FT-IR、SEM、EDS等表征了COFs的结构、形貌及元素组成,考察了初始Cu(Ⅱ)质量浓度、吸附时间、废水pH、温度等对Cu(Ⅱ)吸附效果的影响。结果表明:反应5 min内即达到吸附平衡;在初始Cu(Ⅱ)质量浓度300 mg/L,吸附时间30 min,废水pH=3.0,温度25℃,COFs用量5.0 mg条件下,COFs对Cu(Ⅱ)的最大吸附量达171.6 mg/g,吸附效果较好;吸附过程符合Langmuir等温吸附模型和准二级动力学吸附模型,吸附过程为放热。COFs可用于常温常压下从废水中吸附去除Cu(Ⅱ)。 展开更多
关键词 COFs 功能化制备 吸附 Cu(Ⅱ) 巯基 废水
下载PDF
含烯丙基侧基聚芳醚酮的制备及其表征 被引量:1
2
作者 曹建伟 王志鹏 +3 位作者 王红华 周光远 李存峰 崔善子 《功能高分子学报》 CAS CSCD 北大核心 2012年第4期424-428,共5页
通过酚酞啉和二氟二苯酮的SN2亲核缩聚反应合成侧链含有羧基的聚芳醚酮(PEK-L),再经与丙烯酸羟乙酯(HEA)的酯化反应得到了含有烯丙基侧基的聚芳醚酮树脂(PEK-L-A),通过改变反应物单体的加入量可调整烯丙基的接枝率。用FT-IR、1 H-NMR、... 通过酚酞啉和二氟二苯酮的SN2亲核缩聚反应合成侧链含有羧基的聚芳醚酮(PEK-L),再经与丙烯酸羟乙酯(HEA)的酯化反应得到了含有烯丙基侧基的聚芳醚酮树脂(PEK-L-A),通过改变反应物单体的加入量可调整烯丙基的接枝率。用FT-IR、1 H-NMR、DSC等手段表征和测试了聚合产物的结构与性能。结果表明:以该功能性聚芳醚酮为基体树脂配制的溶液涂层经紫外光固化后其涂层的耐热温度可达300℃,冲击强度高于100kg.cm。 展开更多
关键词 新型酚酞聚芳醚酮 功能化制备 紫外光固化 高性能涂料
下载PDF
含环氧侧基酚酞聚芳醚酮的合成及其自固化 被引量:1
3
作者 王红华 关兴华 +2 位作者 王志鹏 周光远 李存峰 《应用化学》 CAS CSCD 北大核心 2013年第8期974-976,共3页
由3,3'-双(4-羟基苯基)苯并吡咯酮(HPP)和4,4'-二氟二苯酮经亲核缩聚合成聚芳醚酮(PEK-H),再经与环氧氯丙烷(ECH)的亲核取代反应,制得了一种含量可控的环氧侧基酚酞聚芳醚酮(PEK-HE)。改变ECH的投料量,可调控环氧侧基在聚合物... 由3,3'-双(4-羟基苯基)苯并吡咯酮(HPP)和4,4'-二氟二苯酮经亲核缩聚合成聚芳醚酮(PEK-H),再经与环氧氯丙烷(ECH)的亲核取代反应,制得了一种含量可控的环氧侧基酚酞聚芳醚酮(PEK-HE)。改变ECH的投料量,可调控环氧侧基在聚合物中的含量。采用FTIR、1H NMR和TGA等技术对聚合物进行了结构表征与性能测试,并考察了经自固化后聚合物涂膜的性能。涂膜热稳定性较固化前明显提高,5%热失重温度均在450℃以上。涂膜具有优异的热性能和机械性能:耐温(350±20)℃;冲击强度高于100 kg·cm。 展开更多
关键词 酚酞聚芳醚酮 功能化制备 环氧侧基 可控 自固化 高性能涂料
下载PDF
含环氧侧基酚酞聚芳醚酮共聚物的合成与表征
4
作者 关兴华 王志鹏 +2 位作者 崔善子 王红华 周光远 《高分子材料科学与工程》 EI CAS CSCD 北大核心 2013年第6期1-4,共4页
酚酞(PPH)、3,3′-双(4-羟基苯基)苯并吡咯酮(HPP)和4,4′-二氟二苯酮经亲核缩聚得到聚芳醚酮(PEK-C-H),再经与环氧氯丙烷(ECH)的亲核取代反应合成了一种含有环氧侧基的酚酞聚芳醚酮共聚物(PEK-C-HE)。通过改变反应单体ECH的量,调控聚... 酚酞(PPH)、3,3′-双(4-羟基苯基)苯并吡咯酮(HPP)和4,4′-二氟二苯酮经亲核缩聚得到聚芳醚酮(PEK-C-H),再经与环氧氯丙烷(ECH)的亲核取代反应合成了一种含有环氧侧基的酚酞聚芳醚酮共聚物(PEK-C-HE)。通过改变反应单体ECH的量,调控聚合物的环氧侧基含量。采用红外光谱(FT-IR)、核磁共振(1H-NMR)和差示扫描量热(DSC)等手段对聚合物进行结构表征与性能测试。以PEK-C-HE在极性非质子溶剂中具有良好的溶解性及成膜性制备了溶液涂层,并考察了涂膜经自固化交联后的性能。结果表明,PEK-C-HE涂层具有优异的综合性能,可在(300±20)℃连续30h不脱落,表面电阻均为1.05×1016Ω,冲击强度均大于100 kg.cm。PEK-C-HE有望应用于高性能涂料的制备。 展开更多
关键词 酚酞聚芳醚酮共聚物 功能化制备 环氧侧基 可控 自固化 高性能涂料
下载PDF
CoFe_(2)O_(4)磁核硅胶纳米复合材料在化学分离/分析中的应用
5
作者 曾艳霞 朱霞石 《山东化工》 CAS 2021年第12期130-133,135,共5页
CoFe_(2)O_(4)磁核纳米复合材料的功能化制备是以钴铁氧纳米粒子作磁核,硅胶负载包裹制备得到磁硅胶纳米粒子,并进一步在此基础上功能化得到目标纳米复合材料。制备的钴铁氧磁核纳米复合材料在分析化学中的应用是近年来的研究热点之一。... CoFe_(2)O_(4)磁核纳米复合材料的功能化制备是以钴铁氧纳米粒子作磁核,硅胶负载包裹制备得到磁硅胶纳米粒子,并进一步在此基础上功能化得到目标纳米复合材料。制备的钴铁氧磁核纳米复合材料在分析化学中的应用是近年来的研究热点之一。CoFe_(2)O_(4)-SiO_(2)纳米粒子的功能化主要包括氨基、巯基、酸基、甲基、金属氧化物、石墨烯、环糊精等。此外,也有少量报导包括多巴胺、抗体、血红蛋白等生物功能化负载CoFe_(2)O_(4)-SiO_(2)等。本文报导了最新CoFe_(2)O_(4)磁硅胶纳米复合材料的功能化材料在化学分离/分析中的应用情况。 展开更多
关键词 CoFe_(2)O_(4) 磁硅胶纳米 功能化制备
下载PDF
Adsorbents for Expanded Bed Adsorption: Preparation and Functionalization 被引量:3
6
作者 赵珺 姚善泾 林东强 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2009年第4期678-687,共10页
Expanded bed adsorption(EBA),a promising and practical separation technique,has been widely studied in the past two decades.The development of adsorbents for EBA process is a challenging course,with the special design... Expanded bed adsorption(EBA),a promising and practical separation technique,has been widely studied in the past two decades.The development of adsorbents for EBA process is a challenging course,with the special design and preparation according to the target molecules and specific expanded bed systems.Many types of supporting matrices for expanded bed adsorbents have been developed,and their preparation methods are being consummated gradually.These matrices are activated and then coupled with ligands to form functionalized adsorbents,including ion-exchange adsorbents,affinity adsorbents,mixed mode adsorbents,hydrophobic charge induction chromatography adsorbents and others.In this review,the preparation of the matrices for EBA process is summa-rized,and the coupling of ligands to the matrices to prepare functionalized adsorbents is discussed as well. 展开更多
关键词 expanded bed adsorption MATRIX PREPARATION tunctionalized adsorbent CHROMATOGRAPHY SEPARATION
下载PDF
Scalable preparation of functionalized graphite nanoplatelets via magnetic grinding as lubricity-enhanced additive
7
作者 季海滨 何志伟 +1 位作者 宋沙沙 赵增典 《Journal of Central South University》 SCIE EI CAS CSCD 2016年第11期2800-2808,共9页
Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite ... Graphite nanoplatelets were prepared by a novel magnetic-grinding method using self-made equipments. Under a variant magnetic field, magnetic needles collided at a high rotating speed and exfoliated pristine graphite into graphite nanoplatelets with high efficiency. The obtained graphite nanoplatelets are highly crystalline, and the thickness is less than 10 nm. Moreover, the surface area could reached 738.1 m^2/g with a grinding time of 4 h. Silanized graphite nanoplatelets can disperse well in SG 15W-40 engine oil and serve as lubricant additive. Tribological results indicate that the friction coefficient and wear-scar of the friction pairs are lower than 76% and 41%, respectively, by adding 1.5‰(mass fraction) of silanized graphite nanoplatelets. Notably, the functionalized graphite nanoplatelets can realize large-scale production and commercial application. 展开更多
关键词 magnetic grinding graphite nanoplatelets SILANIZATION lubricant additives
下载PDF
Easily prepared and stable functionalized magnetic ordered mesoporous silica for efficient uranium extraction 被引量:3
8
作者 Wenlu Guo Changming Nie +6 位作者 Lin Wang Zijie Li Lin Zhu Liuzheng Zhu Zhentai Zhu Weiqun Shi Liyong Yuan 《Science China Chemistry》 SCIE EI CAS CSCD 2016年第5期629-636,共8页
Functionalized magnetic Fe_3O_4@SiO_2 composite nanoparticles were prepared by simply embedding iron oxide nanoparticles into MCM-41 through one-step synthesis process, followed by aminopropyls grafting on the mesopor... Functionalized magnetic Fe_3O_4@SiO_2 composite nanoparticles were prepared by simply embedding iron oxide nanoparticles into MCM-41 through one-step synthesis process, followed by aminopropyls grafting on the mesopore channels, aiming to efficiently and conveniently uptake U(VI) from aqueous solution. The resultant material possesses highly ordered mesoporous structure with large surface area, uniform pore size, excellent thermal stability, quick magnetic response, and desirable acids resistance, confirmed by Fourier transform infrared spectroscopy(FTIR), scanning electron microscopy(SEM), N_2 adsorption/desorption experiments, powder X-ray diffraction(PXRD), and thermogravimetric analysis(TGA). Detailed U(VI) sorption test indicated that this material is indeed an effective U(VI) sorbent with fast sorption kinetics of less than 2 h, large sorption capacity of 160 mg/g at p H 5.0±0.1, and desirable selectivity towards U(VI) ions over a range of competing metal ions. The absorbed U(VI) can be easily desorbed by 0.01 mol/L or more concentrated HNO_3 solution, and the reclaimed sorbent can be reused with no obvious decrease of sorption capacity even after 4 sorption-desorption cycles. The present results suggest the vast opportunities of this kind of magnetic composite on the solid-phase extraction of U(VI). 展开更多
关键词 aminopropyls MAGNETIC ordered mesoporous silica URANIUM SORPTION
原文传递
A novel preparation method of sulfonic functionalized silica: CH3SO3H as the sulfonic source and Al as the bridge
9
作者 Naiwang Liu Jiajia Yao Li Shi 《Science China Chemistry》 SCIE EI CAS CSCD 2016年第3期264-270,共7页
A novel approach is designed to optimize the synthesis of sulfonic-functionalized silica material. Results from 29Si and 27AI NMR suggest that the AI acts as the bridging atom connecting the methanesulfonate and silic... A novel approach is designed to optimize the synthesis of sulfonic-functionalized silica material. Results from 29Si and 27AI NMR suggest that the AI acts as the bridging atom connecting the methanesulfonate and silica matrix. Further pyridine-FTIR spectra followed by catalytic activity tests demonstrate that compared with previous methods, our new approach results in higher Lewis acid site concentration, higher thermal stability and superior catalytic activity. Moreover, the whole catalysis preparation procedure is environmentally friendly. Specifically, the silica matrix is synthesized through hydrolysis of tetrae- thylorthosilicate employing formic acid as hydro-catalyst, in which no surfactant species or precursors were involved. 展开更多
关键词 methanesulfonic acid SILICA SULFONATION solid super-acid catalyst
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部