Ce（SO4）2？H2O2 solution was adopted to prepare a chemical conversion coating on AZ91D magnesium alloy.Additives of Ni（NO3）2 and sodium dodecyl benzene sulfonate were applied to improving the coating formation.SEM,...Ce（SO4）2？H2O2 solution was adopted to prepare a chemical conversion coating on AZ91D magnesium alloy.Additives of Ni（NO3）2 and sodium dodecyl benzene sulfonate were applied to improving the coating formation.SEM,EDS,XRD and GIXD were adopted to study the coating morphology,structure and composition,and the potential change curve in the treating solution was recorded to study the coating growth.Sodium dodecyl benzene sulfonate makes a remarkable improvement in the coating compactness,and shortens the time in the second stage of the coating formation from 5 min to 2 min.Compared to Ni（NO3）2,sodium dodecyl benzene sulfonate makes the more remarkable effect on the corrosion resistance improvement,since it can decrease the current density of corrosion from 7.41×10-5 A/cm2 to 2.20×10-5 A/cm2.The additives of Ni（NO3）2 and sodium dodecyl benzene sulfonate can enhance the Ce content from 18.92% to 22.32% and 25.08% in the coating,respectively.The XRD and GIXD results indicated that all the conversion coating formed in different solutions exhibit amorphous structure.展开更多
Based on the mechanism of resid hydrotreating reaction by coordinating the catalyst activity and stability, the diffusion mechanism and catalyst reactivity, the cost and catalyst performance, and the production and ap...Based on the mechanism of resid hydrotreating reaction by coordinating the catalyst activity and stability, the diffusion mechanism and catalyst reactivity, the cost and catalyst performance, and the production and application requirements, the third-generation series catalysts for residue hydrotreating have been developed by Research Institute of Petroleum Processing, SINOPEC. The new series RHT catalysts possess higher activity for HDS, HDM and HDCCR performance as well as longer run length. The commercial results for application of these catalysts have demonstrated that the new catalyst system performs better than the reference ones.展开更多
The effects of contents of AlF3 and Al2O3, and temperature on electrical conductivity of （Na3AlF6-40%K3AlF6）- AlF3-Al2O3 were studied by continuously varying cell censtant （CVCC） technique. The results show that t...The effects of contents of AlF3 and Al2O3, and temperature on electrical conductivity of （Na3AlF6-40%K3AlF6）- AlF3-Al2O3 were studied by continuously varying cell censtant （CVCC） technique. The results show that the conductivities of melts increase with the increase of temperature, but by different extents. Every increasing 10 ℃ results in an increase of 1.85 × 10^-2, 1.86× 10^-2, 1.89 × 10^-2 and 2.20 × 10^-2 S/cm in conductivity for the （Na3AlF6-40%K3AlF6）-AlF3 melts containing 0%, 20%, 24%, and 30% AlF3, respectively. An increase of every 10 ℃ in temperature results an increase about 1.89× 10^-2, 1.94 × 10^-2, 1.95 × 10^-2, 1.99× 10^-2 and 2.10× 10^-2 S/cm for （Na3AlF6-40%K3AlF6）-AlF3-Al2O3 melts containing 0%, 1%, 2%, 3% and 4% Al2O3, respectively. The activation energy of conductance was calculated based on Arrhenius equation. Every increasing 1% of AlF3 results in a decrease of 0.019 and 0.020 S/cm in conductivity for （Na3AlF6-40%K3AlF6）-AlF3 melts at 900 and 1 000 ℃, respectively. Every increase of 1% Al2O3 results in a decrease of 0.07 S/cm in conductivity for （Na3AlF6-40%K3AlF6）-AlF3-Al2O3 melts. The activation energy of conductance increases with the increase in content of AlF3 and Al2O3.展开更多
This article illustrates the application of the ICR series lube oil isodewaxing catalysts in commercial scale and proposes the strategy on long cycle operation and optimization of catalysts. The results of commercial ...This article illustrates the application of the ICR series lube oil isodewaxing catalysts in commercial scale and proposes the strategy on long cycle operation and optimization of catalysts. The results of commercial application of the catalyst have revealed that the catalyst after pretreatment including drying, sulfidation and reduction can process VGO into base oils meeting the HVI II and HVI II+ standards, and can manufacture base oils meeting the HVI III standard after incorporating the filtrate oil or gatch from acetone-benzene solvent dewaxing unit. The nitrogen content of the feed oil to the IDW reactor should be controlled at 1.0—1.5 ppm, while the CO and CO2 contents in fresh hydrogen is strictly controlled to avoid poisoning of the IDW-HDF catalysts.展开更多
This article has summarized the optimized measures relating to the loading of catalyst,and the sixth operating cycle of the residue hydrotreating unit at SINOPEC's Maoming Branch Company,and made a detailed compar...This article has summarized the optimized measures relating to the loading of catalyst,and the sixth operating cycle of the residue hydrotreating unit at SINOPEC's Maoming Branch Company,and made a detailed comparison on the impurities removal rate,hydrogen consumption and energy consumption of the sixth operating cycle with those achieved by the previous five cycles.Test results have revealed that the second-generation RHT series novel residue hydrotreating catalysts featured high activity,good stability,and long operating cycle and could remarkably reduce the hydrogen consumption and energy consumption of process unit.The hydrotreated AR product,having low Conradson carbon residue,low sulfur content,low metal content,high content of saturated hydrocarbons,and low content of asphaltenes and resins,is an excellent FCC feed.Judging from their overall property the second-generation RHT series of residue hydrotreating catalysts used in the sixth operating cycle have commanded a leading position among other catalysts used in previous operating cycles.展开更多
Chitin and chitosan have been applied to biological wastewater treatment.From a number of parallel comparison experiments,it can be concluded that the application of chitin and chitosan can both enhance the biological...Chitin and chitosan have been applied to biological wastewater treatment.From a number of parallel comparison experiments,it can be concluded that the application of chitin and chitosan can both enhance the biological treatment,besides which chitosan is more efficient than chitin.The study on the enhancement mechanism reveals the difference between the two additives:chitosan improves the sludge structure and settlibility,while chitin acts as a kind of carrier for microorganism in the biological treatment system.展开更多
The new generation of DCC catalysts, the DMMC/RMMC series catalysts developed by RIPP are introduced in this paper. The large molecule cracking ability is enhanced by increasing the portion of large pores; and the cok...The new generation of DCC catalysts, the DMMC/RMMC series catalysts developed by RIPP are introduced in this paper. The large molecule cracking ability is enhanced by increasing the portion of large pores; and the coke selectivity is improved by adjusting the acidity site density on the matrix surface, while the selective cracking reactions are increased. The sphericity of catalysts is improved by adopting new preparation method. The commercial application results have shown that applying DMMC/RMMC series catalysts with the mixed VGO, VGO plus AR, and hydrotreated VGO feed can increase the propylene yield by 2.43, 1.3 and 0.8 percentage points, respectively, as compared to the previous catalysts along with improvement in some products yields. The refining enterprises can make more profits after applying new series of DCC catalysts.展开更多
基金Project (20070420772) supported by Postdoctoral Science Foundation of ChinaProject (7010404) supported by the Natural Science Foundation of Guangdong Province,China
文摘Ce（SO4）2？H2O2 solution was adopted to prepare a chemical conversion coating on AZ91D magnesium alloy.Additives of Ni（NO3）2 and sodium dodecyl benzene sulfonate were applied to improving the coating formation.SEM,EDS,XRD and GIXD were adopted to study the coating morphology,structure and composition,and the potential change curve in the treating solution was recorded to study the coating growth.Sodium dodecyl benzene sulfonate makes a remarkable improvement in the coating compactness,and shortens the time in the second stage of the coating formation from 5 min to 2 min.Compared to Ni（NO3）2,sodium dodecyl benzene sulfonate makes the more remarkable effect on the corrosion resistance improvement,since it can decrease the current density of corrosion from 7.41×10-5 A/cm2 to 2.20×10-5 A/cm2.The additives of Ni（NO3）2 and sodium dodecyl benzene sulfonate can enhance the Ce content from 18.92% to 22.32% and 25.08% in the coating,respectively.The XRD and GIXD results indicated that all the conversion coating formed in different solutions exhibit amorphous structure.
文摘Based on the mechanism of resid hydrotreating reaction by coordinating the catalyst activity and stability, the diffusion mechanism and catalyst reactivity, the cost and catalyst performance, and the production and application requirements, the third-generation series catalysts for residue hydrotreating have been developed by Research Institute of Petroleum Processing, SINOPEC. The new series RHT catalysts possess higher activity for HDS, HDM and HDCCR performance as well as longer run length. The commercial results for application of these catalysts have demonstrated that the new catalyst system performs better than the reference ones.
基金Project(2005CB623703) supported by the Major State Basic Research and Development Program of ChinaProject(2008AA030503) supported by the National High-Tech Research and Development Program of ChinaProject(GUIKEJI 0639032) supported by Applied Basic Research in Guangxi Province, China
文摘The effects of contents of AlF3 and Al2O3, and temperature on electrical conductivity of （Na3AlF6-40%K3AlF6）- AlF3-Al2O3 were studied by continuously varying cell censtant （CVCC） technique. The results show that the conductivities of melts increase with the increase of temperature, but by different extents. Every increasing 10 ℃ results in an increase of 1.85 × 10^-2, 1.86× 10^-2, 1.89 × 10^-2 and 2.20 × 10^-2 S/cm in conductivity for the （Na3AlF6-40%K3AlF6）-AlF3 melts containing 0%, 20%, 24%, and 30% AlF3, respectively. An increase of every 10 ℃ in temperature results an increase about 1.89× 10^-2, 1.94 × 10^-2, 1.95 × 10^-2, 1.99× 10^-2 and 2.10× 10^-2 S/cm for （Na3AlF6-40%K3AlF6）-AlF3-Al2O3 melts containing 0%, 1%, 2%, 3% and 4% Al2O3, respectively. The activation energy of conductance was calculated based on Arrhenius equation. Every increasing 1% of AlF3 results in a decrease of 0.019 and 0.020 S/cm in conductivity for （Na3AlF6-40%K3AlF6）-AlF3 melts at 900 and 1 000 ℃, respectively. Every increase of 1% Al2O3 results in a decrease of 0.07 S/cm in conductivity for （Na3AlF6-40%K3AlF6）-AlF3-Al2O3 melts. The activation energy of conductance increases with the increase in content of AlF3 and Al2O3.
文摘This article illustrates the application of the ICR series lube oil isodewaxing catalysts in commercial scale and proposes the strategy on long cycle operation and optimization of catalysts. The results of commercial application of the catalyst have revealed that the catalyst after pretreatment including drying, sulfidation and reduction can process VGO into base oils meeting the HVI II and HVI II+ standards, and can manufacture base oils meeting the HVI III standard after incorporating the filtrate oil or gatch from acetone-benzene solvent dewaxing unit. The nitrogen content of the feed oil to the IDW reactor should be controlled at 1.0—1.5 ppm, while the CO and CO2 contents in fresh hydrogen is strictly controlled to avoid poisoning of the IDW-HDF catalysts.
文摘This article has summarized the optimized measures relating to the loading of catalyst,and the sixth operating cycle of the residue hydrotreating unit at SINOPEC's Maoming Branch Company,and made a detailed comparison on the impurities removal rate,hydrogen consumption and energy consumption of the sixth operating cycle with those achieved by the previous five cycles.Test results have revealed that the second-generation RHT series novel residue hydrotreating catalysts featured high activity,good stability,and long operating cycle and could remarkably reduce the hydrogen consumption and energy consumption of process unit.The hydrotreated AR product,having low Conradson carbon residue,low sulfur content,low metal content,high content of saturated hydrocarbons,and low content of asphaltenes and resins,is an excellent FCC feed.Judging from their overall property the second-generation RHT series of residue hydrotreating catalysts used in the sixth operating cycle have commanded a leading position among other catalysts used in previous operating cycles.
文摘Chitin and chitosan have been applied to biological wastewater treatment.From a number of parallel comparison experiments,it can be concluded that the application of chitin and chitosan can both enhance the biological treatment,besides which chitosan is more efficient than chitin.The study on the enhancement mechanism reveals the difference between the two additives:chitosan improves the sludge structure and settlibility,while chitin acts as a kind of carrier for microorganism in the biological treatment system.
文摘The new generation of DCC catalysts, the DMMC/RMMC series catalysts developed by RIPP are introduced in this paper. The large molecule cracking ability is enhanced by increasing the portion of large pores; and the coke selectivity is improved by adjusting the acidity site density on the matrix surface, while the selective cracking reactions are increased. The sphericity of catalysts is improved by adopting new preparation method. The commercial application results have shown that applying DMMC/RMMC series catalysts with the mixed VGO, VGO plus AR, and hydrotreated VGO feed can increase the propylene yield by 2.43, 1.3 and 0.8 percentage points, respectively, as compared to the previous catalysts along with improvement in some products yields. The refining enterprises can make more profits after applying new series of DCC catalysts.
