期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
高乙烯基聚丁二烯的加工流动行为 被引量:2
1
作者 何晓峰 孙佳琪 +1 位作者 葛铁军 张学全 《合成橡胶工业》 CAS CSCD 北大核心 2016年第4期276-279,共4页
用旋转流变仪考察了高乙烯基聚丁二烯的加工流动行为。结果表明,对于乙烯基摩尔分数85.9%、结晶度20.1%的聚丁二烯而言,当温度低于160℃时,材料的储能模量和损耗模量随着温度的升高而降低,零剪切黏度随温度升高而略有降低;测试温度高于... 用旋转流变仪考察了高乙烯基聚丁二烯的加工流动行为。结果表明,对于乙烯基摩尔分数85.9%、结晶度20.1%的聚丁二烯而言,当温度低于160℃时,材料的储能模量和损耗模量随着温度的升高而降低,零剪切黏度随温度升高而略有降低;测试温度高于160℃时三者均随着温度的升高而提高。材料的临界交联温度为160℃左右。实验结果可以确立材料加工温度与交联反应之间的关系。 展开更多
关键词 高乙烯基聚丁二烯 储能模量 损耗模量 零剪切黏度 交联反应 加工流动行为
下载PDF
Processing map and hot deformation behavior of Ta-particle reinforced TiAl composite 被引量:7
2
作者 Cheng-hao YUAN Bin LIU +1 位作者 Yu-xi LIU Yong LIU 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2020年第3期657-667,共11页
The hot deformation behavior of a Ta-particle reinforced TiAl composite was studied.Ti-48Al-2Cr-2Nb-0.2 W(at.%)/20 vol.%Ta metal matrix composite was fabricated by spark plasma sintering.The deformation behavior was i... The hot deformation behavior of a Ta-particle reinforced TiAl composite was studied.Ti-48Al-2Cr-2Nb-0.2 W(at.%)/20 vol.%Ta metal matrix composite was fabricated by spark plasma sintering.The deformation behavior was investigated by hot compression tests at the temperature ranging from 1050 to 1200℃ and the strain rate ranging from 1×10-3 to 1 s-1.The constitutive equation containing true strain variables was established.The values of activation energy Q under different strain degrees are between 240 and 280 kJ/mol,which are lower than that of pure TiAl.Based on dynamic material modeling,the processing maps at various strain degrees were established,and the optimized parameters for hot working are 1050-1100℃ and 0.005-0.01 s-1.The microstructural evolution during deformation was characterized,which indicated that the dynamic recrystallization plays an important role in this process. 展开更多
关键词 TiAl-based composite flow behavior processing map dynamics recrystallization
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部