The usage of plastic-impregnated waste derived solid fuel in conventional combustor is hindered by many technical factors, especially its organic chlorine content. In this paper, experimental study of hydrothermal tre...The usage of plastic-impregnated waste derived solid fuel in conventional combustor is hindered by many technical factors, especially its organic chlorine content. In this paper, experimental study of hydrothermal treatment on mixed plastic waste using the mixture of polypropylene, polystyrene, polyethylene and polyvinyl chloride （PVC） has been performed to observe the dechlorination effect of hydrothermal treatment on the waste. The system was generally applying saturated steam at around 2.4 MPa in a stirring reactor for about 90 minutes. After undergoing the process, the organic chlorine in treated plastic waste was reduced to 1,700 ppm level while the inorganic chlorine content was increased, suggesting an organic chlorine conversion phenomenon to inorganic chlorine, accompanied with low pH due to dehydrochlorination process. Additional limestone （Ca（OH）2） in subsequent experiment showed that the similar phenomenon was occurred but with higher pH and lower chlorine content in the condensed water, suggesting the production of inorganic salt rather than hydrochloric acid. Laboratory scale experiment was also performed to confirm the dechlorination phenomena especially for PVC, and the result showed that the main parameter which affected the dechlorination phenomena was the amount of water in hydrothermal process rather than limestone addition. It is suggested that a combination ofhydrothermal process and alkali addition would produce a low-chlorine solid product from plastic waste, promoting its usage as alternative solid fuel.展开更多
The main research purpose of this paper is to study the mechanical properties of the sand gravel packing of the retaining wall under the creep condition of reinforced materials, in order to figure it out, Indoor physi...The main research purpose of this paper is to study the mechanical properties of the sand gravel packing of the retaining wall under the creep condition of reinforced materials, in order to figure it out, Indoor physical experiments were carried out.展开更多
The forest biomass is an abundant renewable resource from which biofuels can be derived. In the Kraft process, the cellulose is extracted from the wood to form the paper pulp while the other organic components, primar...The forest biomass is an abundant renewable resource from which biofuels can be derived. In the Kraft process, the cellulose is extracted from the wood to form the paper pulp while the other organic components, primarily hemicelluloses and lignin, are burnt to produce steam. It is possible to divert part of the hemicelluloses or lignin to produce fuels on site, a mode of operation referred to as the integrated forest biorefinery. Hemicelluloses can be hydrolysed into sugars which in turn are converted into ethanol or butanol, while lignin can be extracted from a residual process stream, the black liquor, by acid precipitation, de-ionized, dried and directly used as a fuel or further processed into value added chemicals. Biorefinery processes have been proposed and analysed by simulation on Aspen Plus. Intensive integration of thermal energy, water and material systems is of paramount importance to the sustainability of the global site; the increased energy load on the utility systems could cause rising dependency of the global site on fossil fuels. To avoid this consequence, a new original energy efficiency analysis and enhancement methodology has been developed and validated on actual Canadian Kraft mills before being applied to the integrated biorefinery and, has produced remarkable results far superior to the current engineering practice. This has led to the concept of the GIFBR （green integrated forest biorefinery）, i.e., an industrial site with zero fossil fuel consumption and reduced GHG （greenhouse gases） emissions vs. the Kraft process and biorefinery plant alone. The GIFBR incorporates a woody biomass gasifier producing syngas as a fuel for the integrated biorefinery and for steam production or sale. It can also include a CHP （combined heat and power） unit driven by steam made available by liberated production capacity from the installed power plant.展开更多
文摘The usage of plastic-impregnated waste derived solid fuel in conventional combustor is hindered by many technical factors, especially its organic chlorine content. In this paper, experimental study of hydrothermal treatment on mixed plastic waste using the mixture of polypropylene, polystyrene, polyethylene and polyvinyl chloride （PVC） has been performed to observe the dechlorination effect of hydrothermal treatment on the waste. The system was generally applying saturated steam at around 2.4 MPa in a stirring reactor for about 90 minutes. After undergoing the process, the organic chlorine in treated plastic waste was reduced to 1,700 ppm level while the inorganic chlorine content was increased, suggesting an organic chlorine conversion phenomenon to inorganic chlorine, accompanied with low pH due to dehydrochlorination process. Additional limestone （Ca（OH）2） in subsequent experiment showed that the similar phenomenon was occurred but with higher pH and lower chlorine content in the condensed water, suggesting the production of inorganic salt rather than hydrochloric acid. Laboratory scale experiment was also performed to confirm the dechlorination phenomena especially for PVC, and the result showed that the main parameter which affected the dechlorination phenomena was the amount of water in hydrothermal process rather than limestone addition. It is suggested that a combination ofhydrothermal process and alkali addition would produce a low-chlorine solid product from plastic waste, promoting its usage as alternative solid fuel.
文摘The main research purpose of this paper is to study the mechanical properties of the sand gravel packing of the retaining wall under the creep condition of reinforced materials, in order to figure it out, Indoor physical experiments were carried out.
文摘The forest biomass is an abundant renewable resource from which biofuels can be derived. In the Kraft process, the cellulose is extracted from the wood to form the paper pulp while the other organic components, primarily hemicelluloses and lignin, are burnt to produce steam. It is possible to divert part of the hemicelluloses or lignin to produce fuels on site, a mode of operation referred to as the integrated forest biorefinery. Hemicelluloses can be hydrolysed into sugars which in turn are converted into ethanol or butanol, while lignin can be extracted from a residual process stream, the black liquor, by acid precipitation, de-ionized, dried and directly used as a fuel or further processed into value added chemicals. Biorefinery processes have been proposed and analysed by simulation on Aspen Plus. Intensive integration of thermal energy, water and material systems is of paramount importance to the sustainability of the global site; the increased energy load on the utility systems could cause rising dependency of the global site on fossil fuels. To avoid this consequence, a new original energy efficiency analysis and enhancement methodology has been developed and validated on actual Canadian Kraft mills before being applied to the integrated biorefinery and, has produced remarkable results far superior to the current engineering practice. This has led to the concept of the GIFBR （green integrated forest biorefinery）, i.e., an industrial site with zero fossil fuel consumption and reduced GHG （greenhouse gases） emissions vs. the Kraft process and biorefinery plant alone. The GIFBR incorporates a woody biomass gasifier producing syngas as a fuel for the integrated biorefinery and for steam production or sale. It can also include a CHP （combined heat and power） unit driven by steam made available by liberated production capacity from the installed power plant.
