Underground coal gasification (UCG) is one of the clean technologies to collect heat energy and gases (hydrogen, methane, etc.) in an underground coal seam. It is necessary to further developing environ- mentally ...Underground coal gasification (UCG) is one of the clean technologies to collect heat energy and gases (hydrogen, methane, etc.) in an underground coal seam. It is necessary to further developing environ- mentally friendly UCG system construction. One of the most important UCG's problems is underground control of combustion area for efficient gas production, estimation of subsidence and gas leakage to the surface. For this objective, laboratory experiments were conducted according to the UCG model to iden- ti[y the process of combustion cavity development by monitoring the electrical resistivity activity on the coal samples to setup fundamental data for the technology engineering to evaluate combustion area. While burning coal specimens, that had been sampled from various coal deposits, electrical resistivity was monitored. Symmetric four electrodes system (ABMN) of direct and low-frequency current electric resistance method was used for laboratory resistivity measurement of rock samples. Made research and the results suggest that front-end of electro conductivity activity during heating and combusting of coal specimen depended on heating temperature. Combusting coal electro conductivity has compli- cated multistage type of change. Electrical resistivity method is expected to be a useful geophysical tool to for evaluation of combustion volume and its migration in the coal seam.展开更多
The fiber Bragg grating (FBG) is a passive optical fiber component with the refractive index modulated along the fiber length and has been widely applied in fiber sensing systems. High-temperature stable fiber grati...The fiber Bragg grating (FBG) is a passive optical fiber component with the refractive index modulated along the fiber length and has been widely applied in fiber sensing systems. High-temperature stable fiber gratings are promising for uses at high temperatures and attract extensive attention. In this paper, FBGs were inscribed in hydrogen loaded standard single mode fibers with the 248-nm excimer laser, and regenerated gratings were obtained through heat treatment. The shift of the central wavelength of the regenerated FBG had a good linearity with temperature, and the reflectivity of the regenerated FBG could almost keep unchanged at 800 ℃.展开更多
基金provided by the Ministry of EducationScience of Russian Federation (No. P1679),Far Eastern Federal University
文摘Underground coal gasification (UCG) is one of the clean technologies to collect heat energy and gases (hydrogen, methane, etc.) in an underground coal seam. It is necessary to further developing environ- mentally friendly UCG system construction. One of the most important UCG's problems is underground control of combustion area for efficient gas production, estimation of subsidence and gas leakage to the surface. For this objective, laboratory experiments were conducted according to the UCG model to iden- ti[y the process of combustion cavity development by monitoring the electrical resistivity activity on the coal samples to setup fundamental data for the technology engineering to evaluate combustion area. While burning coal specimens, that had been sampled from various coal deposits, electrical resistivity was monitored. Symmetric four electrodes system (ABMN) of direct and low-frequency current electric resistance method was used for laboratory resistivity measurement of rock samples. Made research and the results suggest that front-end of electro conductivity activity during heating and combusting of coal specimen depended on heating temperature. Combusting coal electro conductivity has compli- cated multistage type of change. Electrical resistivity method is expected to be a useful geophysical tool to for evaluation of combustion volume and its migration in the coal seam.
基金This work was supported by the Major Program of the National Natural Science Foundation of China (Grant No. 61290311).
文摘The fiber Bragg grating (FBG) is a passive optical fiber component with the refractive index modulated along the fiber length and has been widely applied in fiber sensing systems. High-temperature stable fiber gratings are promising for uses at high temperatures and attract extensive attention. In this paper, FBGs were inscribed in hydrogen loaded standard single mode fibers with the 248-nm excimer laser, and regenerated gratings were obtained through heat treatment. The shift of the central wavelength of the regenerated FBG had a good linearity with temperature, and the reflectivity of the regenerated FBG could almost keep unchanged at 800 ℃.