For laser assisted machining,shape of preheating laser heat source is changed irregularly because of complexity of material shape.So,the preheating temperature should be controlled by adjusting the feed rate or the la...For laser assisted machining,shape of preheating laser heat source is changed irregularly because of complexity of material shape.So,the preheating temperature should be controlled by adjusting the feed rate or the laser power.Thermal analyses of the laser assisted machining process for inclination planes were performed.By analyzing the obtained temperature profile,a proper feed rate control method was proposed according to the inclination angles.In addition,the temperature distribution of the cross section after feed rate control was predicted.The correlation equation between inclination angles and adjusted proper feed rate was proposed.The results of this analysis can be used to predict the preheating effect on workpiece and can be applied as a preheating temperature control method in laser assisted machining processes.展开更多
Tail buffeting at high angle of attack causes distinct fatigue problem on tail structure of twin tail fighters.In this study,a piezoelectric active control experiment of tail buffeting was performed in a wind tunnel u...Tail buffeting at high angle of attack causes distinct fatigue problem on tail structure of twin tail fighters.In this study,a piezoelectric active control experiment of tail buffeting was performed in a wind tunnel using arching PZT actuator(APA) and principal modal control(PMC) method.Test results showed the peak value of power spectral density(PSD) function of tail buffeting acceleration response could be suppressed by about 42% when the angle of attack reached 35°,indicating the validity and feasibility of PMC method and APA for tail buffeting alleviation at high angle of attack.展开更多
基金Project(2011-0017407)supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MEST)
文摘For laser assisted machining,shape of preheating laser heat source is changed irregularly because of complexity of material shape.So,the preheating temperature should be controlled by adjusting the feed rate or the laser power.Thermal analyses of the laser assisted machining process for inclination planes were performed.By analyzing the obtained temperature profile,a proper feed rate control method was proposed according to the inclination angles.In addition,the temperature distribution of the cross section after feed rate control was predicted.The correlation equation between inclination angles and adjusted proper feed rate was proposed.The results of this analysis can be used to predict the preheating effect on workpiece and can be applied as a preheating temperature control method in laser assisted machining processes.
基金supported by the National Natural Science Foundation of China (Grant No. 11072198)the Basic Research Program of Northwestern Polytechnical University (Grant No. JC201102) "111" Project(Grant No. B07050)
文摘Tail buffeting at high angle of attack causes distinct fatigue problem on tail structure of twin tail fighters.In this study,a piezoelectric active control experiment of tail buffeting was performed in a wind tunnel using arching PZT actuator(APA) and principal modal control(PMC) method.Test results showed the peak value of power spectral density(PSD) function of tail buffeting acceleration response could be suppressed by about 42% when the angle of attack reached 35°,indicating the validity and feasibility of PMC method and APA for tail buffeting alleviation at high angle of attack.
