马来酸单酯聚合物复鞣加脂剂的制备与性能

以长链脂肪醇马来酸单酯为亲油单体,丙烯酸为亲水单体,过硫酸铵为引发剂,采用活泼单体滴加方式制备了马来酸单酯聚合物复鞣加脂剂。通过质谱和热重-差热分析对聚合物结构进行了表征。考察了脂肪醇种类,丙烯酸单体滴加速度,单酯与丙烯酸摩尔比和引发剂用量等因素对聚合物性能的影响。结果表明,当脂肪醇为十六醇,n(丙烯酸)/n(单酯)=2.0,过硫酸铵占单体总质量的5%,聚合温度80℃,丙烯酸滴加时间2h时,所得产品具有较好的柔软、填充和防水性能,处理革的增厚率在30%左右,静态吸水率在60%左右。

LY-W结合型加脂剂的研制及应用

本文报道了以长链混和脂肪酸、多乙烯多胺、氯乙酸钠等为原料 ,经酰胺化、亲核取代、复配等工艺 ,合成了性能优良的结合型加脂剂—LY -W。

米糠油加脂剂的研制

以米糠油为主要原料,通过酰胺化,酯化引入羧基,使之生成一种具有络合活性的物质再与动物油,植物油等复配而制成阴离子型加脂剂,在水中呈稳定的乳液,它具有良好的渗透性及分散性,与皮纤维有较好的结合能力。能使皮革丰满、柔软,粒面细致平滑。适用于猪服装革、出口劳保手套革及进口牛修面革的加脂。

Advances in Application of Non-aqueous Phase Enzymatic Catalysis in Food Additive Production

Non-aqueous phase enzymatic catalysis technology has been widely ap- plied in the area of food additives production. This paper reviewed the types of re- action medium of non-aqueous phase enzymatic catalysis reaction, introduced the application of non-aqueous phase enzymatic catalysis technology in catalysis of L-ascorbic （isoascorbic） acid esters, short-chain acid esters, sugar esters, vitamin A esters, vi- tamin E esters, and other food additives, and finally predicted the prospects of non- aqueous phase enzymatic catalysis technology.

Effect of vinylene carbonate as electrolyte additive on cycling performance of LiFePO_4/graphite cell at elevated temperature

Effects of film-forming additive on stability of electrode and cycling performance of LiFePO4/graphite cell at elevated temperature were studied. Two 18650 cells with and without VC additive were investigated by galvanostatic cycling, electrochemical impedance spectroscopy, scanning electron microscopy, energy-dispersive X-ray analysis and Raman spectroscopy. The results show that in the presence of VC additive, dissolution of Fe from LiFePO4 material is greatly depressed and stability of graphite structure is improved; the additive can not only reduce reaction of electrolyte on surface of LiFePO4 electrode but also suppress reduction of solvent and thickening of the solid electrolyte interface （SEI） layer on graphite surface. Electrolyte with VC is considered to be a good candidate for improving cycling performance of the LiFePOa/graphite cell at elevated temperature.

In_2O_3-modified Cu/SiO_2 as an active and stable catalyst for the hydrogenation of methyl acetate to ethanol

A series of indium oxide‐modified Cu/SiO2catalysts were synthesized and used to produce ethanol via methyl acetate hydrogenation.In‐Cu/SiO2catalyst containing1.0wt%In2O3exhibited the best catalytic activity and stability.The physicochemical properties of the synthesized catalysts were investigated using several characterization methods and the results showed that introducing suitable indium to Cu/SiO2increased the copper dispersion,diminished the copper crystallite size,and enriched the surface Cu+concentration.Furthermore,the Cu/SiO2catalyst gradually deactivated during the stability test,which was mainly attributed to copper sintering and the valence change in surface copper species.In contrast,indium addition can inhibit the thermal transmigration and accumulation of copper nanoparticles to stabilize the catalyst.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved.

Study on Tribological Properties of CVT Fluid Containing Inert and Active Functional Elements

The lubricating characteristics of CVTF(continuously variable transmission fluid) mixed with a multi-functional complex additive were studied. The said complex additive contained an organic borate ester and a new type of friction improver comprising phosphorus element and poly-methylmethacrylate(PMMA), and a viscosity index improver. The viscosity-pressure characteristics were evaluated by a high-pressure quartz viscometer, and the anti-wear property was investigated by a four-ball friction tester. The mechanism of lubrication by the CVTF was studied using X-ray photoelectron spectroscopy(XPS). The results showed that CVTF T10, which contained a multi-functional complex additive, exhibited excellent properties, featuring greater solidification pressure and pressure-viscosity coefficient, improved oil film strength, and low wear value. These attributes meet the special CVTF requirements for "high friction and low wear" that make it possible to provide both traction and lubrication. The lubricating mechanism was varied using different functional elements, such as inert and active elements. Sulfur and phosphorus are active extreme pressure elements that can react on the metal friction surface and produce an extreme pressure lubrication film. Boron is an inert functional element and does not react upon the metal surface; boron is only adsorbed onto the metal surface to act as a lubricant for adsorption film and fillers.

Promotional Effect of CoO(OH) on Selective Hydrogenation of Maleic Anhydride to γ-Butyrolactone over Supported Ruthenium Catalyst

A decorated ruthenium catalyst was prepared by the coprecipitation method and used for the selective hydrogenation of maleic anhydride(MA) to γ-butyrolactone(GBL). The as-prepared catalyst was characterized by XRD, TGDTG and N2 adsorption techniques. The characterization tests revealed that the catalyst carrier was composed of monoclinic zirconia(m-ZrO2) and hydroxyl cobalt oxide(CoO(OH)). The hydrogenation results showed that the content of CoO(OH), the reaction temperature, the hydrogen pressure and the reaction time significantly affected the catalytic selectivity to GBL. The promotional effect of CoO(OH) was remarkable, which led to an obvious increase in GBL selectivity. An 100% MA conversion and 92.0% selectivity to GBL were achieved over the Ru/ZrO2-CoO(OH)(35%) catalyst in water solvent under the conditions involving a reaction temperature of 180 ℃, a hydrogen pressure of 3.0 MPa, and a reaction time of 6 h.

Synthesis of Polymethacrylates Used as Multifunctional Lubricating Oil Additives

In this paper, four kinds of polymethacrylates(PMAs) used as multifunctional additives were synthesized from quaternary C1—C14 methacrylate, among which sample 4 exhibited relatively better performance. According to the methacrylate ratio of sample 4, the optimized reaction conditions of PMA were explored by orthogonal experiments comprising 4 factors and 3 levels, and the optimized reaction conditions covered an initiator dosage of 0.8 %, a molecular weight regulator dosage of 0.4%, a reaction temperature of 95 ℃ and a reaction time of 8.5 h. When the optimized PMA samples were used to formulate the 75W/90 automotive gear base oil, they exhibited improved shear stability and good low temperature property. In comparison with foreign commercial polymethacrylate GP, the optimized PMA samples exhibited better thickening ability, similar shear stability and slightly weak low temperature property, with their performance being the same as GP's on the whole. The slight difference in the performance between the optimized PMA and GP was attributed to the difference of chain length of copolymers and the distribution of relative molecular mass between them.

Influence of Copper on Transport and Dissipation of Lambda-Cyhalothrin and Cypermethrin in Soils

Repeated applications of bordeaux mixture （a blend of copper sulfate and calcium hydroxide） and pyrethroid insecticides （Pys） have led to elevated copper （Cu） and Pys concentrations in vineyard surface soils. To understand the potential influence of Cu on the fate of Pys in the soil environment, we selected two Pys, cypermethrin （CPM） and lambda-cyhalothrin （A-CHT）, and two typical Chinese vineyard soils, Haplic Acrisol and Luvic Phaeozem, as experimental samples. The dissipation experiment was conducted at room temperature in the dark, and the transport of both Pys through the soils was investigated using soil thin-layer chromatography. The results showed that the transport of Pys in both soils increased as the Cu2＋ concentration increased from 0 to 100 mg L-1, and Pys were more transportable in Haplic Acrisol （HA） than in Luvic Phaeozem （LP） under the same experimental conditions. For CPM, only 100 mg L-1 of Cu2＋ significantly （P 〈 0.05） increased Pys transport through both soils relative to water. Lambda-CHT was significantly （P〈0.05） transported through HA by all the Cu2＋ concentrations compared to water, and all but the 1 mg L-1 of Cu2＋ significantly （P 〈 0.05） increased the transport of A-CHT through LP relative to water. However, the dissipation rates of CPM and λ-CHT decreased with the addition of Cu to soils. Our findings suggest that the risk of groundwater contamination by Pys increases in the soils with elevated Cu concentrations.