Super hydrophobic copper wafer was prepared by means of solution immersion and surface self-assembly methods. Different immersion conditions were explored for the best hydrophobic surface. Scanning electron microscopy...Super hydrophobic copper wafer was prepared by means of solution immersion and surface self-assembly methods. Different immersion conditions were explored for the best hydrophobic surface. Scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrometer (EDS) and water contact angle measurements were used to investigate the morphologies, microstructures, chemical compositions and hydrophobicity of the produced films on copper substrates, respectively. Results show that the super hydrophobic surface is composed of micro structure of Cu 7 S 4 . The films present a high water contact angle larger than 150°, a low sliding angle less than 3°, good abrasion resistance and storage stability. The molecular dynamics simulation confirms that N-dodecyl mercaptan molecules link up with Cu 7 S 4 admirably, compared with Cu, which contributes to the stable super hydrophobic surface.展开更多
A novel method was developed for papain immobilization through a biomimetic silicification process induced by papain. By incubating papain in a silica precursor solution, the papain-silica composite formed rapidly and...A novel method was developed for papain immobilization through a biomimetic silicification process induced by papain. By incubating papain in a silica precursor solution, the papain-silica composite formed rapidly and oanain was encansulated. The encansulation efficiency and the recovery activity were 82.60% and 83.09%, re-spectively. Compared with enzymes and biomolecules immobilized in biosilica matrix in the presence of additaonal silica-precipitating species, this papaln encapsulation process, a biomimetic approach, realized high encapsulation efficiency by its autosilification activity under mild conditions （near-neutral pH and ambient temperature）. Fur-thermore, the encapsulated papain exhibits enhanced thermal, pH, recycling and storage stabilities. Kinetic analysis showed that the biomimetic silica matrix did not significantly hinder the mass transport of substrate or the release of product.展开更多
Solid electrolyte based-resistive memories have been considered to be a potential candidate for future information technology with applications in non-volatile memory, logic circuits and neuromorphic computing. A cond...Solid electrolyte based-resistive memories have been considered to be a potential candidate for future information technology with applications in non-volatile memory, logic circuits and neuromorphic computing. A conductive filament model has been generally accepted to be the underlying mechanism for the resistive switching. However, the growth dynamics of such conductive filaments is still not fully understood. Here, we explore the controllability of filament growth by correlating observations of the filament growth with the electric field distribution and several other factors. The filament growth behavior has been recorded using in situ transmission electron microscopy. By studying the real- time recorded filament growth behavior and morphologies, we have been able to simulate the electric field distribution in accordance with our observations. Other factors have also been shown to affect the filament growth, such as Joule heating and electrolyte infrastructure. This work provides insight into the controllable growth of conductive filaments and will help guide research into further functionalities of nanoionic resistive memories.展开更多
Upconversion is a process in which one photon is emitted upon absorption of several photons of lower energy. Potential applications include super resolution spectroscopy, high density data storage, anti-counterfeiting...Upconversion is a process in which one photon is emitted upon absorption of several photons of lower energy. Potential applications include super resolution spectroscopy, high density data storage, anti-counterfeiting and biological imaging and photo-induced therapy. Upconversion luminescence dynamics has long been believed to be determined solely by the emitting ions and their interactions with neighboring sensitizing ions. Recent research shows that this does not hold for nanostructures.The luminescence time behavior in the nanomaterials is confirmed seriously affected by the migration process of the excitation energy. This new fundamental insight is significant for the design of functional upconversion nanostructures. In this paper we review relevant theoretical and spectroscopic results and demonstrate how to tune the rise and decay profile of upconversion luminescence based on energy migration path modulation.展开更多
基金Supported by the Beijing Youth Fellowship Program and the Fundamental Research Funds for the Central Universities(2011YXL056)
文摘Super hydrophobic copper wafer was prepared by means of solution immersion and surface self-assembly methods. Different immersion conditions were explored for the best hydrophobic surface. Scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectrometer (EDS) and water contact angle measurements were used to investigate the morphologies, microstructures, chemical compositions and hydrophobicity of the produced films on copper substrates, respectively. Results show that the super hydrophobic surface is composed of micro structure of Cu 7 S 4 . The films present a high water contact angle larger than 150°, a low sliding angle less than 3°, good abrasion resistance and storage stability. The molecular dynamics simulation confirms that N-dodecyl mercaptan molecules link up with Cu 7 S 4 admirably, compared with Cu, which contributes to the stable super hydrophobic surface.
基金Supported by the National Natural Science Foundation of China （21006020, 21276060, 21276062）, the Natural Science Foundation of Hebei Province （B2010000035, B2011202095）, the Science and Technology Research Key Project of Higher School in Hebei Province （ZD2010118）, the Application Basic Research Plan Key Basic Research Project of Hebei Province （11965150D） and Open Funding Project of ~e National Key Laboratory ofBiochemi＇cal Engineering （China）.
文摘A novel method was developed for papain immobilization through a biomimetic silicification process induced by papain. By incubating papain in a silica precursor solution, the papain-silica composite formed rapidly and oanain was encansulated. The encansulation efficiency and the recovery activity were 82.60% and 83.09%, re-spectively. Compared with enzymes and biomolecules immobilized in biosilica matrix in the presence of additaonal silica-precipitating species, this papaln encapsulation process, a biomimetic approach, realized high encapsulation efficiency by its autosilification activity under mild conditions （near-neutral pH and ambient temperature）. Fur-thermore, the encapsulated papain exhibits enhanced thermal, pH, recycling and storage stabilities. Kinetic analysis showed that the biomimetic silica matrix did not significantly hinder the mass transport of substrate or the release of product.
文摘Solid electrolyte based-resistive memories have been considered to be a potential candidate for future information technology with applications in non-volatile memory, logic circuits and neuromorphic computing. A conductive filament model has been generally accepted to be the underlying mechanism for the resistive switching. However, the growth dynamics of such conductive filaments is still not fully understood. Here, we explore the controllability of filament growth by correlating observations of the filament growth with the electric field distribution and several other factors. The filament growth behavior has been recorded using in situ transmission electron microscopy. By studying the real- time recorded filament growth behavior and morphologies, we have been able to simulate the electric field distribution in accordance with our observations. Other factors have also been shown to affect the filament growth, such as Joule heating and electrolyte infrastructure. This work provides insight into the controllable growth of conductive filaments and will help guide research into further functionalities of nanoionic resistive memories.
基金supported by the European Union MSCA-ITN-ETN Action Program,Image-Guided Surgery and Personalised Postoperative Immunotherapy to Improving Cancer Outcome(ISPIC)(Grant No.675743)the Netherlands Organisation for Scientific Research in the framework of the Fund New Chemical Innovation(Grant No.731.015.206)+2 种基金the European COST Action(Grant No.CM1403)the Joint Research Program between CAS of China and the Royal Netherlands Academy of Arts and Sciences(KNAW)Innovation Project of State Key Laboratory of Luminescence and Applications of China
文摘Upconversion is a process in which one photon is emitted upon absorption of several photons of lower energy. Potential applications include super resolution spectroscopy, high density data storage, anti-counterfeiting and biological imaging and photo-induced therapy. Upconversion luminescence dynamics has long been believed to be determined solely by the emitting ions and their interactions with neighboring sensitizing ions. Recent research shows that this does not hold for nanostructures.The luminescence time behavior in the nanomaterials is confirmed seriously affected by the migration process of the excitation energy. This new fundamental insight is significant for the design of functional upconversion nanostructures. In this paper we review relevant theoretical and spectroscopic results and demonstrate how to tune the rise and decay profile of upconversion luminescence based on energy migration path modulation.
