电动汽车动力性参数的仿真设计与试验验证

按照市场定位和动力性设计要求,对正在研发的某电动汽车的基本结构参数和电动机的功率、传动比和蓄电池的容量与组数以及整车续驶里程等参数进行匹配设计。应用ADVISOR软件建立整车仿真模型,对其动力性进行仿真分析。最后通过实车试验,验证了仿真模型的合理性和该动力性参数设计方法的可行性。

Effect of Heat Stress on Photosynthetic Characteristics of Different Green Organs of Winter Wheat During Grain-filling Stage

Four winter wheat (Triticum aestivum L.) varieties ('JD 8', 'Jing 411','Centurk' and 'Tam 202') were used to study the effect of heat stress on photosynthetic characteristics of flag leaf blade, nag leaf sheath, peduncle, glume, lemma and awn during grain-filling stage. The results showed that heat acclimation during grain-filling stage increased thermotolerance of wheat with significant differences among different green organs. During heat stress, the decreases of the efficiency of primary light energy conversion (F-v/F-m) of PS II and pigment (chlorophyll and carotenoid) content were much slower in peduncle, flag leaf sheath and glume than in nag leaf blade, lemma and ann; and the percentage of decrease in net photosynthetic rate (P-n) of ear was lower than that of the nag leaf blade. The measured photosynthetic parameters (F-v/F-m, P-n and pigment content) of 'JD 8', a relatively heat tolerant variety, declined more slowly than those of the other three varieties during the whole heat stress period.

Full-scale application of microbial agent on in-situ sludge reduction

The full-scale application of Tx-1, a multifunctional microbial agent, was carried out for 8 months in an anoxic/oxic（A/O） municipal wastewater treatment process. The results show that the Tx-1 dosed system can obtain good effluent characteristics while minimizing sludge production and energy consumption. The total phosphorus（TP） is lower than0. 5 mg/L in effluent without any chemical regent added. The discharged dry sludge per 10 000 m^3 wastewater Dwat decreases from 1. 4 to 0. 5 t. For per cubic meter wastewater, the air supply decreases from 6. 0 to 5. 1 m^3 and the electricity consumption decreases from 0. 412- 0. 425 kW·h to 0. 331 kW·h. The addition of Tx-1 can improve the substrate removal constant and decrease the microorganism growth yield coefficient of activated sludge. At the same time,the structure of the microbial community changes and the biodiversity increases by adding Tx-1. The abundance of polyphosphate accumulating organisms（PAO）, Comamonadaceae and Tetrasphaera, increased. Effective microbial agent is a potential way to combine in-situ sludge minimization with contaminants removal.

A CFD Based Investigation of the Unsteady Hydrodynamic Coefficients of 3-D Fins in Viscous Flow

The motion of the fins and control surfaces of underwater vehicles in a fluid is an interesting and challenging research subject.Typically the effect of fin oscillations on the fluid flow around such a body is highly unsteady, generating vortices and requiring detailed analysis of fluid-structure interactions.An understanding of the complexities of such flows is of interest to engineers developing vehicles capable of high dynamic performance in their propulsion and maneuvering.In the present study, a CFD based RANS simulation of a 3-D fin body moving in a viscous fluid was developed.It investigated hydrodynamic performance by evaluating the hydrodynamic coefficients (lift, drag and moment) at two different oscillating frequencies.A parametric analysis of the factors that affect the hydrodynamic performance of the fin body was done, along with a comparison of results from experiments.The results of the simulation were found in close agreement with experimental results and this validated the simulation as an effective tool for evaluation of the unsteady hydrodynamic coefficients of 3-D fins.This work can be further be used for analysis of the stability and maneuverability of fin actuated underwater vehicles.

Nonlinear characteristics of induced spontaneous combustion process of sulfide ores

To investigate the relationship between nonlinear parameters and spontaneous combustion tendency of sulfide ores, nine different sulfide ore samples were taken from a pyrite mine in China, and induced spontaneous combustion experiment was carried out in the laboratory. Different stages of the induced spontaneous combustion process were studied by integrating wavelet technology and nonlinear dynamics theory. The results show that ignition points of all the ore samples are above 330 ℃, indicating that sulfide ores of the pyrite mine are difficult to combust spontaneously under normal mining conditions. Spontaneous combustion process includes three stages： incubation stage, development stage and approaching stage. The average temperature rising rate of the three stages are 1.0 ~C/min, 2.0 ~C/min and 4.2 ~C/min, respectively. During the spontaneous combustion process, mean values of approximate entropy and correlation dimension increase at first, and then decrease in the following stage. The mean value of the maximum Lyapunov exponent increases with the passage of reaction time. In a whole, correlation among the three nonlinear parameters firstly weakens, then enhances, and the best correlation period is at approaching stage. As ignition point increases, the maximum Lyapunov exponent of approaching stage decreases. Therefore, combustible tendency of sulfide ores could be qualitatively evaluated based on the maximum Lyapunov exponent of this stage.

Comparison between the new mechanistic and the chaos scale-up methods for gas-solid fluidized beds

The chaotic scale-up approach by matching the Kolmogorov entropy(E_K) proposed by Schouten et al.(1996) was assessed in two geometrically similar gas–solid fluidized bed columns of 0.14 and 0.44 m diameter.We used four conditions of our validated new mechanistic scale-up method based on matching the radial profiles of gas holdup where the local dimensionless hydrodynamic parameters were similar as measured by advanced measurement techniques.These experimental conditions were used to evaluate the validity of the chaotic scale-up method,which were selected based on our new mechanistic scale-up methodology.Pressure gauge transducer measurements at the wall and inside the bed at various local radial locations and at three axial heights were used to estimate KE.It was found that the experimental conditions with similar or close radial profiles of the Kolmogorov entropy and with similar or close radial profiles of the gas holdup achieve the similarity in local dimensionless hydrodynamic parameters,and vice versa.

Thermogravimetric characteristics and different kinetic models for medical waste composition containing polyvinyl chloride-transfusion tube

Thermogravimetric study of medical transfusion tube （MTT） waste containing polyvinyl chloride （PVC） was carried out using the thermogravimetric analyser （TGA） with N2, at different heating rates of 5, 10, 20, 30, 50 ℃/min. The purpose is to obtain pyrolysis characteristics and kinetic parameters of medical waste. The experimental results indicate that the pyrolysis behavior of the MTT sample is in agreement with its main ingredient of PVC, appearing two stair stepping stages. The influence of the additives in MTT on pyrolysis behavior was also revealed, which could improve MTT pyrolysis at lower temperature in the first stage, and cause obvious unsmoothness and asymmetry of the second DTG peak. Four n-order kinetic models of Coats-Redfern, Ozawa, Kissinger and Freeman-carroll were used to get the kinetic parameters. Furthermore, a novel ＂two-step four-reaction model＂ was established to simulate the whole continuous process. The different methods and the kinetic parameters thus obtained were discussed and compared with each other in literatures. The reasons of deviation among kinetic values were tried to be elucidated. The new established model could more satisfactorily describe the pyrolysis process of MTT, being more mechanistic and conveniently serving for the engineering.

A Wind Tunnel Two-Dimensional Parametric Investigation of Biplane Configurations

This paper presents an experimental and systematic investigation about how geometric parameters on a biplane configuration have an influence on aerodynamic parameters. This experimental investigation has been developed in a two-dimensional approach. Theoretical studies about biplanes configurations have been developed in the past, but there is not enough information about experimental wind tunnel data at low Reynolds number. This two-dimensional study is a first step to further tridimensional investigations about the box wing configuration. The main objective of the study is to find the relationships between the geometrical parameters which present the best aerodynamic behavior： the highest lift, the lowest drag and the lowest slope of the pitching moment. A tridimensional wing-box model will be designed following the pattern of the two dimensional study conclusions. It will respond to the geometrical relationships that have been considered to show the better aerodynamic behavior. This box-wing model will be studied in the aim of comparing the advantages and disadvantages between this biplane configuration and the plane configuration, looking for implementing the box-wing in the UAV＇s field. Although the box wing configuration has been used in a small number of existing UAV, prestigious researchers have found it as a field of high aerodynamic and structural potential.

Aerodynamic stability of cable-stayed-suspension hybrid bridges

Three-dimensional nonlinear aerodynamic stability analysis was applied to study the aerodynamic stability of a cable-stayed-suspension (CSS) hybrid bridge with main span of 1400 meters, and the effects of some design parameters (such as the cable sag, length of suspension portion, cable plane arrangement, subsidiary piers in side spans, the deck form, etc.) on the aerodynamic stability of the bridge are analytically investigated. The key design parameters, which significantly influence the aerodynamic stability of CSS hybrid bridges, are pointed out, and based on the wind stability the favorable structural system of CSS hybrid bridges is discussed.

A parametric study on the contact stress of half toroidal continuously variable transmission

The most general contact in mechanical transmission is the elliptical one. In particular, a toroidal continuously variable transmission (CVT) has an elliptical shape in the contact area under the elastohydrodynamic lubrication regime, where the shearing of the fluid subjects to high contact stress and transmits the power. Many parameters affect the contact service performance of the half toroidal CVT, which include the properties of the contacting material (Young抯 modulus), operating parameters (input torque and maximum traction coefficient) and geometrical parameters (aspect cavity ratio, curvature ratio and half cone angle of the power roller). In this paper, the contacts between the input disk, the power roller and the output disk are formulated using the classical Hertzian contact theory. Based on the formulated equations, different system parameters, which affect the maximum Hertzian stresses, are compared. The comparative results will provide some observations of the relations between the maximum Hertzian stresses and transmission ratios in the form of graphs. These graphs give useful information for designer to know the maximum Hertzian stress during operation in such systems.

Analytical Bond-order Potential for hcp-Y

The lattice parameters, elastic constants, cohesive energy, structural energy differences, as well as the properties of point defects and planar defects of hexagonal closepacked yttrium （hcpY） have been studied with ab initio density functional theory for constructing an ex tensive database. Based on an analytical bondorder poial scheme, empirical manybody interatomic potential for hcpY has been developed. The model is fitted to some properties of Y, e.g., the lattice parameters, elastic constants, bulk modulus, cohesive energy, vacancy formation energy, and the structural energy differences. The present potential has ability to reproduce defect properties including the selfinterstitial atoms formation energies, vacancy formation energy, divacancy binding energy, as well as the bulk properties and the thermal dynamic properties.

DETERMINATION OF THERMODYNAMIC AND KINETIC PARAMETERS OF LARGE SCALE CHROMATOGRAPHIC SEPARATION OF SUGAR AND REDUCING SUGAR

The parameter identification model of largr scale chromatography separation process is proposed. The Phase equilibrium constants and lumped mass transfer coefficients of sugar and reducing sugar adsorption on D1, D2 and D3 resins as well as the axial dispersion coefficients of the fluid through packed columns are determined by means of the pulse-response experiment technique with an inert substance as a tracer and the chromatography measuring technique. The elution curve calculated from these parameters is good agreement with the experimental elution curve. The sensitivity analysis of these parameters is carried out, and the ressult shows that the elation curves of chromatography separation are more sensitive to the variations Of the Phase equilibrium relationship than to the variation of the axial dispersion as well as the lumped mass transfer coefficients.

Combustion characteristics of Daqing oil shale and oil shale semi-cokes

Thermo-gravimetric-analysis(TGA) was used to analyze the combustion characteristics of an oil shale and semi-cokes prepared from it.The effect of prior pyrolysis and TGA heating rate on the combustion process was studied.Prior pyrolysis affects the initial temperature of mass loss and the ignition temperature.The ignition temperature increases as the volatile content of the sample decreases.TG/DTG curves obtained at different heating rates show that heating rate has little effect on ignition temperature.But the peak of combustion shifts to higher temperatures as the heating rate is increased.The Coats-Redfern integration method was employed to find the combustion-reaction kinetic parameters for the burning of oil shale and oil shale semi-coke.

Molecular dynamics simulations on the relationship between the elastic parameters and the molecular structures of nano-hybrid POSS materials

To research the relationship between the elastic parameters and the molecular structures of nano hybrid polyhedral oligomeric silsesquioxanes （POSS） materials, the mechanical properties at different temperatures for three POSS polymers with different molecular architectures, polymerlized norbornene POSS homopolymer （PNPOSS, pedant architecture）, γ- （2, 3 glycidoxy） propyl diaminoethane POSS polymer （GPDP, catena architecture） and trimethoxysilylcyelopentyl POSS polymer （ TSCP, cage - cage network architecture） were obtained by molecular dynamics simulations based on the Compass force-field. Results indicate that the moleculax architectures of the POSS polymers have great influence on the reinforced effects. The effect of the cage-cage network architecture is best, while that of the catena architecture takes second place and the pedant architecture has the least influence comparatively. The reinforced effects of the POSS monomers were examined. The influences of the temperatures on these effects were analyzed also. It may provide some basis for the reasonable applications of the excellent mechanical properties of the organic-inorganic nano-hybrid materials. It may also provide references for exploitation and design of the POSS materials.

Nuclear Slope Parameter of pp and p Elastic Scattering in QCD Inspired Model

Based on the quark-gluon structure of nucleon and the possible existence of Odderon in strong interaction process due to gluon self-interaction, the elastic scatterings of pp and p^-p at high energies are studied. The contributions from individual terms of quark-quark, gluon-gluon interactions, quark-gluon interference, and the Odderon terms to the nuclear slope parameter B（s） are analyzed. Our results show that the QCD inspired model gives a good fit to the LHC experimental data of the nuclear slope parameter.

Nonlinear Dynamic Reliability of Coupled Stay Cables and Bridge Tower

Nonlinear vibration can cause serious problems in long span cable-stayed bridges.When the internal resonance threshold is reached between the excitation frequency and natural frequency,large amplitudes occur in the cable.Based on the current situation of lacking corresponding constraint criteria,a model was presented for analyzing the dynamic reliability of coupling oscillation between the cable and tower in a cable-stayed bridge.First of all,in the case of cable sag,the d'Alembert principle is applied to studying the nonlinear dynamic behavior of the structure,and resonance failure interval of parametric oscillation is calculated accordingly.Then the dynamic reliability model is set up using the JC method.An application of this model has been developed for the preliminary design of one cable-stayed bridge located on Hai River in Tianjin,and time histories analysis as well as reliability indexes have been obtained.When frequency ratio between the cable and tower is approaching 1∶2,the reliability index is 0.98,indicating high failure probability.And this is consistent with theoretical derivation and experimental results in reference.This model,which is capable of computing the reliability index of resonance failure,provides theoretical basis for the establishment of corresponding rule.

The Influence of Blocking Mass Parameters on the Vibration Isolation Performance of a Power Cabin

Rigid blocking masses are located in the typical base structure of a power cabin based on the impedance mismatch principle.By combining the acoustic-structural coupling method and statistical energy analysis,the full-band vibration and sound radiation reduction effect of vibration isolation masses located in a base structure was researched.The influence of the blocking mass’ cross-section size and shape parameters and the layout location of the base isolation performance was discussed.Furthermore,the effectiveness of rigid vibration isolation design of the base structure was validated.The results show that the medium and high frequency vibration and sound radiation of a power cabin are effectively reduced by a blocking mass.Concerning weight increment and section requirement,suitably increasing the blocking mass size and section height and reducing section width can result in an efficiency-cost ratio.

Accurate vision measurement for kinematic parameters of satellite separation tests

The accurate measurement of kinematic parameters in satellite separation tests has great significance in evaluating separation performance. A novel study is made on the measuring accuracy of monocular and binocular, which are the two main vision measurement methods used for kinematic parameters. As satellite separation process is transient and high-dynamic, it will bring more extraction errors to the binocular. Based on the design approach of intersection measure and variance ratio, the monocular method reflects higher precision, simpler structure and easier calibration for level satellite separation. In ground separation tests, a high-speed monocular system is developed to gain and analyze twelve kinematic parameters of a small satellite. Research shows that this monocular method can be widely applied for its high precision, with position accuracy of 0.5 mm, speed accuracy of 5 mm/s, and angular velocity accuracy of 1 (°)/s.

SPH-FEM simulations of microwave-treated basalt strength

Microwave precondition has been highlighted as a promising technology for softening the rock mass prior to rock breakage by machine to reduce drill bit/cutter wear as well as inverse production rate.To numerically explore the effect of numerical parameters on rock static strength simulation,and determine the numerical mechanical parameters of microwave-treated basalts for future drilling and cutting simulations,numerical models of uniaxial compression strength(UCS)and Brazilian tensile strength(BTS)were established with the coupling of smoothed particle hydrodynamics and finite element method(SPH-FEM).To eliminate the large rock strength errors caused by microwave-induced damage,the cohesion and internal friction angle of microwave-treated basalt specimens with the same microwave treatment parameters were calibrated based on a linear Mohr-Coulomb theory.Based on parametric sensitivity analysis of SPH simulation of UCS and BTS,experimental UCS and BTS values were simultaneously captured according to the same set of calibrated cohesion and internal friction angle data,and the UCS modeling results are in good agreement with experimental tests.Furthermore,the effect of microwave irradiation parameter on the basalt mechanical behaviors was evaluated.